Analysis of precipitates in heat treated thermo-mechanically processed steel with a high yield strength
Authors:
Open Access
- 1 October 2021
- conference paper
- Published by IOP Publishing in IOP Conference Series: Materials Science and Engineering
- Vol. 1182 (1) , 012026
Abstract
The aim of this study was to analyse the precipitates and determine their impact on the structure of thermomechanically processed high strength S700MC steel. The tested samples were subjected to a heating process at temperatures from 100°C up to 1300°C with a 100°C step. The chemical composition analysis in the micro-areas of the samples, thin-film tests and quantitative measurements of carbonitride precipitates were performed. In order to describe the grain size, a method of calculating the number of grains cut through the measuring line was used. In order to determine the effect of heat treatment on strength and plastic properties, Charpy V-notch, Vickers hardness and static tensile tests were carried out. The study showed that S700MC steel is characterized by a non-equivalent, fine-grained bainitic-ferritic structure. The test showed a significant impact of heat treatment on the strength and plastic properties of S700MC steel.Keywords
This publication has 27 references indexed in Scilit:
- Evaluation of high strength TMCP steel weld for use in cold regionsJournal of Constructional Steel Research, 2012
- Influence of rolling temperature on the austenite structure and properties of low-carbon microalloyed steelSteel in Translation, 2012
- Progress in thermomechanical control of steel plates and their commercializationScience and Technology of Advanced Materials, 2012
- Microstructural characteristic of low carbon microalloyed steels produced by thermo-mechanical controlled processMaterials Science and Engineering: A, 2006
- Fracture characteristics of TMCP and QT steel weldments with respect to crack lengthMaterials Science and Engineering: A, 2006
- Performance of TMCP steel with respect to mechanical properties after cold forming and post-forming heat treatmentInternational Journal of Pressure Vessels and Piping, 2004
- Effects of Nb and Mo Addition to 0.2%C-1.5%Si-1.5%Mn Steel on Mechanical Properties of Hot Rolled TRIP-aided Steel SheetsISIJ International, 2004
- Effect of initial microstructure on the creep behavior of TMCP EH36 and SM490C steelsMaterials Science and Engineering: A, 2003
- The influence of hot rolling parameters on the microstructure and mechanical properties of an ultra-high strength steelJournal of Materials Processing Technology, 2000
- Mechanical properities of an HSLA bainitic steel subjected to controlled rolling with accelerated coolingMaterials Science and Engineering: A, 2000