Analysis of the influence of flexible ring fillet length on the contact characteristics and motion stability of power roll rings
Open Access
- 9 January 2026
- journal article
- Published by JVE International Ltd. in Mechatronic Systems and Materials Proceedings
- Vol. 1, 7-11
Abstract
Based on the COMSOL Multiphysics simulation platform, this paper establishes a complete finite element model of a power roll ring assembly. The model consists of inner and outer conductive rings made of H62 brass and a flexible ring made of C17200 beryllium bronze. After meshing, a rotational speed was applied to the inner conductive ring according to actual working conditions, and consistent boundary conditions and friction coefficients were set at the contact pairs for transient dynamic analysis. The study focuses on investigating the influence of the flexible ring’s fillet length (0.15 mm, 0.20 mm, 0.25 mm, 0.30 mm, 0.35 mm) on the system’s contact characteristics and motion stability. By analyzing stress nephograms, motion trajectory diagrams, and quantitatively calculating contact pressure, the results show that the maximum contact stress of the flexible ring is concentrated at the contact points with the inner and outer conductive rings and increases with the fillet length. However, the contact pressure decreases as the fillet length increases, with small fluctuation amplitude, ensuring the operational stability of the power roll ring. This research provides a theoretical basis and an effective method for the structural optimization and performance evaluation of power roll rings.Keywords
This publication has 8 references indexed in Scilit:
- Real-time remaining useful life prediction based on adaptive kernel window width densityMeasurement Science and Technology, 2022
- RUL Prediction of Wind Turbine Gearbox Bearings Based on Self-Calibration Temporal Convolutional NetworkIEEE Transactions on Instrumentation and Measurement, 2022
- Current-carrying contact character and wear behavior of an elastic ring at different rolling speedsEngineering Failure Analysis, 2022
- Investigation on stress microcycles and mild wear mechanism in gear contact fatigueFatigue & Fracture of Engineering Materials & Structures, 2021
- Estimation of Bearing Remaining Useful Life Based on Multiscale Convolutional Neural NetworkIEEE Transactions on Industrial Electronics, 2018
- A rolling-sliding bench test for investigating rear axle lubricationTribology International, 2018
- Rolling contact fatigue and wear of two different rail steels under rolling–sliding contactInternational Journal of Fatigue, 2016
- Numerical research on the electrical contact model and thermal analysis of the Roll-Ring2013