CHChao Han

Chao Han

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Chao Han has a total of 33 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Numerical simulation of deformation of flexible ring on power rolling ring

    by Junye Li, Beiran Zhang, Gaopeng Shuai, Chuanfeng Wang, Chao Han, Guodong Ni, Liang Xu, Haihonsg Wu, Xiaobin He

    In this paper, the influence of the deformation of the flexible ring on the performance of the power rolling ring is studied by the finite element simulation method. The results show that the maximum stress of the flexible ring is concentrated in the contact area with the inner and outer conductive rings, and the maximum bending stress increases significantly from 93.5 MPa to 217 MPa with the increase of deformation from 0.3 mm to 0.7 mm. On the other hand, with the increase of deformation, the oscillation of the velocity curve of the probe point on the flexible ring is weakened and tends to be smooth, indicating that the stability of the motion is gradually improved. The research reveals that increasing the deformation can improve the motion stability and also lead to a significant increase in the contact stress, which provides an important basis for the balance design between structural reliability and motion stability of the power rolling ring.

  • Open Access

    Analysis of the influence of flexible ring fillet length on the contact characteristics and motion stability of power roll rings

    by Junye Li, Xinjun Xie, Gaopeng Shuai, Haiyan Wu, Hongwei Zhang, Haihong Wu, Weihong Zhao

    Based on the COMSOL Multiphysics simulation platform, this paper establishes a complete finite element model of a power roll ring assembly. The model consists of inner and outer conductive rings made of H62 brass and a flexible ring made of C17200 beryllium bronze. After meshing, a rotational speed was applied to the inner conductive ring according to actual working conditions, and consistent boundary conditions and friction coefficients were set at the contact pairs for transient dynamic analysis. The study focuses on investigating the influence of the flexible ring’s fillet length (0.15 mm, 0.20 mm, 0.25 mm, 0.30 mm, 0.35 mm) on the system’s contact characteristics and motion stability. By analyzing stress nephograms, motion trajectory diagrams, and quantitatively calculating contact pressure, the results show that the maximum contact stress of the flexible ring is concentrated at the contact points with the inner and outer conductive rings and increases with the fillet length. However, the contact pressure decreases as the fillet length increases, with small fluctuation amplitude, ensuring the operational stability of the power roll ring. This research provides a theoretical basis and an effective method for the structural optimization and performance evaluation of power roll rings.


  • Open Access

    Quality Control Technology for Abrasive Flow Precision Machining of a High-Performance Impeller

    by Junye Li, Songyuan Li, Pingping Wei, Changqing Wang, Yanming Li, Ke Liu, Chunlin Liu, Yu Chen, Guiling Wu, Xiao Li, et al.

    The surface quality of high-performance impellers, which feature complex, free-form surfaces and narrow flow channels, is critically important for their performance and efficiency. However, achieving uniform precision polishing on these intricate geometries remains a significant manufacturing challenge, as traditional methods are often inefficient, inaccessible, or cause surface damage. To address this, this study investigates the application of solid–liquid two-phase abrasive flow machining (AFM) as a high-precision finishing solution. Through numerical simulation, we analyzed the polishing effects under two flow channel structures and various machining parameters. The results demonstrate that a gradual flow channel structure significantly enhances processing uniformity and intensity compared to a direct flow channel. Furthermore, increasing the inlet pressure and abrasive viscosity was found to substantially improve both the strength and uniformity of the machining effect across the impeller surface. Experimental validation via an orthogonal test design confirmed that inlet pressure is the most influential factor on the polishing effect, followed by abrasive grain size and the number of processes. The optimized process parameters (6 MPa inlet pressure, 10 process cycles, and 40 µm abrasive grain size) successfully reduced the average surface roughness (Ra) of the high-performance impeller from 0.766 µm to 0.047 µm, representing an improvement of nearly 94%. This study provides a scientifically grounded set of optimal parameters for achieving uniform, high-quality surface finishing of complex impellers using AFM technology.


  • Open Access

    Nano-scale current-carrying friction and wear performance of conductive slip rings: a molecular dynamics study

    by Junye Li, Chao Han, Jianhe Liu, Weihong Zhao, Nianhuan Li, Guodong Ni, Ying Xu, Shukun Wang

    This study employs molecular dynamics (MD) simulations to investigate the nano-scale current-carrying friction and wear behavior of copper/graphite conductive slip rings under varying electric field strengths, normal loads, and sliding velocities. A three-layer MD model comprising graphite, an air gap, and a copper substrate was constructed using Materials Studio and simulated via LAMMPS. Results show that increased electric field strength, load, and sliding speed exacerbate friction force and energy dissipation, while lower parameter values promote the formation of stable tribochemical films and enhance anti-wear performance. These findings provide theoretical guidance for optimizing conductive slip ring design in high-reliability industrial applications.

  • Open Access

    Hollow-Type Integrated Assembly Design and Performance Validation of Conductive Slip Rings via Simulation-Driven Optimization

    by Zhiyuan Qian, Chao Han, Nianhuan Li, Gongqiang Tian, Junye Li, Haihong Wu

    Conductive slip rings (CSRs) are precision components critical to industrial equipment, yet they face challenges such as unstable signal transmission, limited functionality, and difficulties in operational monitoring due to assembly-induced inaccuracies. This study proposes a hollow-type integrated assembly solution, incorporating optimized transmission, clamping, and protection modules through structural design and modular analysis. Static and dynamic simulations identify the optimal assembly angle and connector configuration (hollow-type outperforming flange-type), ensuring reliability and stability. A high-precision universal assembly platform is designed, and an R-axis rotary table-based testing method is developed to evaluate transmission and fixation modes. Results demonstrate the superiority of sleeve couplings and hollow connectors, with the assembled system achieving contact resistance fluctuations below 10 mΩ, angular repeatability under 500″, and accuracy within 720″, meeting all design specifications. The proposed framework combines simulation-driven design with experimental validation, offering a robust approach to enhance the performance of CSRs in industrial applications.