Due to the wide range of water-soluble polymer usages in the commercial products, the water contamination by polymers became a serious environmental concern. The adsorption of water-soluble polymers from aqueous solutions onto an acidic clay, obtained from Tsunagi mine, Niigata, Japan, was investigated as a way of the purification of water using poly(vinylpyrrolidone) as a polymer model to find efficient concentration of the polymer from aqueous solution. The adsorption isotherms at lower equilibrium concentration region were type L showing the high affinity between the acidic clay and poly(vinylpyrrolidone). A larger amount of poly(vinylpyrrolidone) was adsorbed when higher molecular weight poly(vinylpyrrolidone) (molecular weight of 160,000 and 10,000) was used. The capacity of the adsorption from Langmuir equation was 0.029 g/g clay for the adsorption of poly(vinylpyrrolidone) (molecular weight of 160,000) from an aqueous solution. The adsorption of poly(vinylpyrrolidone) from NaCl solution (simulated sea water) was also possible while the amount of the adsorption was slightly lower than those from aqueous solution. Over 90% of the polymer removal efficiency was achieved after adding 200 mg of the acidic clay into 50 ml of 0.001 wt.% of poly(vinylpyrrolidone) aqueous solution. The acidic clay was also used for adsorption of poly(ethylene glycol), poly(vinyl alcohol), and polyacrylamide from aqueous solutions.