ATAranee Pleng Teepakakorn

Aranee Pleng Teepakakorn

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Aranee Pleng Teepakakorn has a total of 10 co-authors. Here are the top co-authors by number of shared publications:

  • Makoto Ogawa

    School of Energy Science and Engineering, Vidyasirimedhi Institute of Science and Technology (VISTEC), 555 Moo 1 Payupnai, Wangchan, Rayong 21210, Thailand

    5 shared publications
  • Nobuyuki Sakai

    Research Center for Materials Nanoarchitectonics (MANA), National Institute for Materials Science (NIMS), 1-1 Namiki, Tsukuba, Ibaraki 305-0044, Japan

    1 shared publication
  • Renzhi Ma

    International Center for Materials Nanoarchitectonics (WPI-MANA), National Institute for Materials Science (NIMS), Namiki 1-1, Tsukuba, Ibaraki 305-0044, Japan

    1 shared publication
  • Sareeya Bureekaew

    1 shared publication
  • Sareeya Bureekaew

    School of Energy Science and Engineering, Vidyasirimedhi Institute of Science and Technology, 555 Moo 1 Payupnai, Wangchan, Rayong 21210, Thailand

    1 shared publication
  • Takayoshi Sasaki

    International Centre for Materials Nanoarchitectonics (WPI-MANA), National Institute for Materials Science (NIMS), 1-1 Namiki, Tsukuba, Ibaraki 305-0044, Japan

    1 shared publication

Latest Publications

  • Open Access

    Layered Alkali Metal Titanate with the Staging Structure and Superior Electrochemical Performance

    by Aranee Pleng Teepakakorn, Tomohiro Tanaka, Nobuyuki Sakai, Yasuo Ebina, Takayuki Kikuchi, Renzhi Ma, Makoto Ogawa, Takayoshi Sasaki

    We systematically explored the formation range of α-NaFeO2-type layered titanate and its ion-exchange behaviors and electrochemical performance. The layered sodium titanate of NaxTi1-x/3Lix/3O2 at x = 0.68-0.70 was synthesized by the solid-state reaction at 900 °C. The titanate is composed of coplanar host layers with the α-NaFeO2-type structure. The interlayer Na+ ions underwent a facile exchange with other alkali metal ions in aqueous solutions at 80 °C, accompanied by concurrent exchange with proton/oxonium ions. Powder X-ray diffraction data on the products and their Rietveld refinement revealed the formation of a unique staging-structured titanate, in which the interlayer galleries are alternately occupied by incoming alkali metal ions and oxonium ions. The electrochemical intercalation-deintercalation properties for Li+ and Na+ ion storage were examined on the pristine sodium titanate and its ion-exchanged derivatives. The staging structure was found to provide superior electrochemical performance, which may be due to the rather open nature of the interlayer galleries, providing abundant sites for Li+ and Na+ ions.


  • Composition-Dependent Thermal Stability and Water-Induced Self-Healing Behavior of Smectite/Waterborne Polymer Hybrid Film

    by Aranee Pleng Teepakakorn, Makoto Ogawa

    By casting an aqueous suspension containing a water-soluble polymer, polyvinylpyrrolidone, and a layered silicate, synthetic hectorite, on the solid substrate, films with varied interlayer expansion were obtained depending on the composition. The thermal stability, water resistance, water-induced self-healing behavior, and adhesion were examined to find their composition dependence, which is thought to be originated from the nanostructure variation. Polyvinylpyrrolidone was thermally stable up to 300 °C for the hybrid with the polymer/clay weight ratio of 0.36 and 260 °C for the weight ratios of 1.08 and 1.80 as shown by the changes in the appearance and structure after heat treatment. The hybrid film with the polymer/clay ratio of 0.36 maintained the film shape when it was soaked in water for 24 h. The hybrids with the polymer/clay ratios of 1.08 and 1.80 were re-dispersed/dissolved into water after the immersion, while the water resistance of the films was enhanced by the thermal treatment at 200 °C for 2 h and showed very fast water-induced self-healing.


  • Open Access

    Self-healing polymer–clay hybrids by facile complexation of a waterborne polymer with a clay

    by Aranee (Pleng) Teepakakorn, Makoto Ogawa

    Water-induced self-healing materials were prepared by the hybridization of a water-soluble polymer, poly(vinyl alcohol), with a smectite clay via mixing in an aqueous medium and subsequent casting. Without using chemical crosslinking agents or heat treatment, the poly(vinyl alcohol)–clay hybrid adhered strongly to substrates, showing self-healing when immersed in water (25 °C). The healing was completed within 1 min by soaking a damaged poly(vinyl alcohol)–clay film under such conditions as in cold water (2 °C), simulated seawater, steam, HCl solutions (pH = 1) and NaOH solutions (pH = 14). The healing was seen repeatedly 10 times.


  • Adsorption-Induced Dye Stability of Cationic Dyes on Clay Nanosheets

    by Aranee Pleng Teepakakorn, Sareeya Bureekaew, Makoto Ogawa

    Rhodamine 6G was adsorbed on smectite clays, a natural montmorillonite, a synthetic saponite and synthetic hectorites, and the decolorization of the dyes upon visible light irradiation was examined for aqueous suspensions and cast films. Excellent dye stability was achieved when the natural montmorillonite was used. Not only for the Rhodamine 6G, better photostability of tris(2,2'-bipyridine)ruthenium(II) complex was found when adsorbed on a natural montmorillonite. The excited state of the dye was quenched efficiently by the impurities in the natural montmorillonite. From the relationship between the excited state quenching (as derived from photoluminescence quantum efficiency and photoluminescence intensity) and the decolorization rate constants, the quenching of the excited state of the dye adsorbed on the natural montmorillonite was proposed as the important mechanism for the stabilization of dye upon the photoirradiation.


  • PREPUBLICATION: Removal of water-soluble polymers from an aqueous solution by adsorption onto an acidic clay

    by Aranee (Pleng) Teepakakorn, Takayuki Hayakawa, Sareeya Bureekaew, Makoto Ogawa

    Due to the wide range of water-soluble polymer usages in the commercial products, the water contamination by polymers became a serious environmental concern. The adsorption of water-soluble polymers from aqueous solutions onto an acidic clay, obtained from Tsunagi mine, Niigata, Japan, was investigated as a way of the purification of water using poly(vinylpyrrolidone) as a polymer model to find efficient concentration of the polymer from aqueous solution. The adsorption isotherms at lower equilibrium concentration region were type L showing the high affinity between the acidic clay and poly(vinylpyrrolidone). A larger amount of poly(vinylpyrrolidone) was adsorbed when higher molecular weight poly(vinylpyrrolidone) (molecular weight of 160,000 and 10,000) was used. The capacity of the adsorption from Langmuir equation was 0.029 g/g clay for the adsorption of poly(vinylpyrrolidone) (molecular weight of 160,000) from an aqueous solution. The adsorption of poly(vinylpyrrolidone) from NaCl solution (simulated sea water) was also possible while the amount of the adsorption was slightly lower than those from aqueous solution. Over 90% of the polymer removal efficiency was achieved after adding 200 mg of the acidic clay into 50 ml of 0.001 wt.% of poly(vinylpyrrolidone) aqueous solution. The acidic clay was also used for adsorption of poly(ethylene glycol), poly(vinyl alcohol), and polyacrylamide from aqueous solutions.