Spray-coating of graphene nanoplatelets on sisal fibers and its influence on electromechanical behavior of biocomposite laminates
- 17 January 2023
- journal article
- research article
- Published by SAGE Publications in Journal of Reinforced Plastics and Composites
- Vol. 43 (1-2) , 3-15
Abstract
Spray coating and vacuum-assisted resin infusion processes were implemented in this work to develop multifunctional biocomposite laminates. The biocomposites were fabricated using a bio-based epoxy resin reinforced with natural sisal fibers coated with graphene nanoplatelets (GNPs). A systematic characterization of material properties was performed to evaluate the mechanical, thermomechanical, electrical, and piezoresistive behavior of biocomposites with different GNPs contents (0, 1, 4, 6, and 8 wt.%). The mechanical tests revealed that adding GNPs to biocomposites has a slight positive effect on their flexural properties compared to the neat biocomposites (without GNPs). The electrical and thermomechanical tests showed that the electrical conductivity and glass transition temperature of biocomposites containing GNPs were enhanced significantly, achieving average values of 5.19 x 10-4 S/m and 63.29°C (26%), respectively. Regarding electromechanical tests, the biocomposites with 8 wt.% GNPs exhibited an excellent piezoresistive behavior under monotonic loading conditions, achieving a gage factor (strain sensitivity) of 3.56. Bending tests with cyclic loading were also performed, and cyclic reproducibility of the piezoresistive response of the biocomposites after 10 cycles was demonstrated, evidencing that the incorporation of GNPs onto sisal fibers by spray-coating produces an effective formation of conductive networks into biocomposites suitable for sensing applications.Keywords
Funding Information
- Secretaría de Ciencia, Humanidades, Tecnología e Innovación (257458, CB-2015-01-257458)
This publication has 26 references indexed in Scilit:
- 1D and 2D oxidized carbon nanomaterials on epoxy matrix: performance of composites over the same processing conditionsMaterials Research Express, 2017
- Improving the fracture toughness properties of epoxy using graphene nanoplatelets at low filler contentNanocomposites, 2017
- Preparation of Graphene Nanoribbons (GNRs) as an Electronic Component with the Multi-walled Carbon Nanotubes (MWCNTs)Procedia Engineering, 2015
- Enhanced thermal and electrical properties of epoxy composites reinforced with graphene nanoplateletsPolymer Composites, 2014
- Progress Report on Natural Fiber Reinforced CompositesMacromolecular Materials and Engineering, 2013
- Influence of Electric Field Coupling Model on the Simulated Performances of a GaN Based Planar NanodeviceJournal of Nanomaterials, 2013
- Raman spectroscopy in graphenePhysics Reports, 2009
- Measurement of the Elastic Properties and Intrinsic Strength of Monolayer GrapheneScience, 2008
- Superior Thermal Conductivity of Single-Layer GrapheneNano Letters, 2008
- Raman spectra of graphite edge planesCarbon, 1988