Use of Sorbents to Increase Beer Foam Stability
Authors:
Open Access
- 1 January 2018
- journal article
- research article
- Published by Taylor & Francis in Journal of the American Society of Brewing Chemists
- Vol. 76 (1) , 58-61
Abstract
Long-lasting creamy foam is an important quality parameter for various types of beers. Foam stability depends on both foam-stabilizing and foam-damaging compounds, and lipids are considered to be the main foam-damaging compounds. The aim of this work was to validate a technologically and economically feasible method for stabilizing beer foam using sorption. Among eight materials tested for their foam stabilizing effects (activated carbon, Florisil, polytetrafluoroethylene, montmorillonite, filter sheet, steel dust, cotton, and polyethylene), three were selected for further study to verify their effects on color, bitterness, and the sensory profile of a commercial lager beer. The results showed that the foam stabilizing effect of sorbents were positively correlated with their surface areas. The most promising sorbents (activated carbon, Florisil, and polytetrafluoroethylene) were effective at low doses (50 mg/L) and short contact times (5 min), and did not affect the color, bitterness, or sensory profile of the beer. At the low dose required and the price of sorbents, their single use in combination with other process aids and subsequent filtration should be economically feasible.Keywords
This publication has 16 references indexed in Scilit:
- Model Solution as a Beer Foam Standard Should Contain Fatty AcidsJournal of the American Society of Brewing Chemists, 2017
- Adhesion of Chlorella vulgaris to solid surfaces, as mediated by physicochemical interactionsJournal of Applied Phycology, 2013
- Relationship between Matrix Foaming Potential, Beer Composition, and Foam StabilityJournal of the American Society of Brewing Chemists, 2010
- A Discussion of Polyphenols in Beer Physical and Flavour StabilityJournal of the Institute of Brewing, 2010
- Analyzing Foam Instability in Commercial BeersJournal of the American Society of Brewing Chemists, 2010
- Destabilization of Beer Foam by Lipids: Structural and Interfacial EffectsJournal of the American Society of Brewing Chemists, 2003
- Don't Be Fobbed Off: The Substance of Beer Foam—A ReviewJournal of the American Society of Brewing Chemists, 2002
- A New Method for Evaluating Foam-Damaging Effect by Free Fatty AcidsJournal of the American Society of Brewing Chemists, 2002
- Foam-Negative MaterialsJournal of the American Society of Brewing Chemists, 2001
- THE PROTECTION OF BEER FOAM AGAINST LIPID-INDUCED DESTABILIZATIONJournal of the Institute of Brewing, 1994