Petr Košin
Research Subjects
Petr Košin has a total of 15 co-authors. Here are the top co-authors by number of shared publications:
J. Savel
Budejovicky Budvar, N.C., Karoliny Svetle 4, Ceske Budejovice, Czech Republic
3 shared publicationsA. Broz
2 shared publicationsAdam Brož
Budějovický Budvar, n.p., Karolíny Světlé 4, 370 21 České Budějovice, Czech Republic
2 shared publicationsJan Šavel
Budějovický Budvar, n.p., Karolíny Světlé 4, 370 21 České Budějovice, Czech Republic
2 shared publicationsD. E. Evans
School of Plant Science, University of Tasmania, Hobart, TAS, Australia
1 shared publicationD.E. Evans
1 shared publication
Latest Publications
- Open Access
Bottle Conditioning: Technology and Mechanisms Applied in Refermented Beers
Bottle conditioning refers to a method of adding fermenting wort or yeast suspension in sugar solution into beer in its final package. Additionally denoted as bottle refermentation, this technique has been originally developed to assure beer carbonation, and has further significance related to formation of distinctive sensory attributes and enhancement of sensory stability, which are the phenomena associated with ongoing yeast metabolic activities in the final package. This review covers historical development of the method, describes metabolic pathways applied during refermentation, and explains practical aspects of the refermentation process management. Furthermore, an overview of the traditional and novel approaches of bottle conditioning with mixed yeast bacterial cultures and its impact on the properties of final beer is provided.
Open AccessBottle Conditioning: Technology and Mechanisms Applied in Refermented Beers
Bottle conditioning refers to a method of adding fermenting wort or yeast suspension in sugar solution into beer in its final package. Additionally denoted as bottle refermentation, this technique has been originally developed to assure beer carbonation, and has further significance related to formation of distinctive sensory attributes and enhancement of sensory stability, which are the phenomena associated with ongoing yeast metabolic activities in the final package. This review covers historical development of the method, describes metabolic pathways applied during refermentation, and explains practical aspects of the refermentation process management. Furthermore, an overview of the traditional and novel approaches of bottle conditioning with mixed yeast bacterial cultures and its impact on the properties of final beer is provided.
- Open Access
- 26 March 2020
- Published by Research Institute of Brewing and Malting, Plc. (Vyzkumny Ustav Pivovarsky a Sladarsky) in KVASNY PRUMYSL
- Vol. 66 (2) , 261-263
Improving foam stability and lautering conditions
How to increase foam stability without adding foam stabilizers? As we published earlier, there was more than a sufficient amount of foam stabilizing substances in beer, but these must not be pushed out of the beer surface by foam negative substances. There are several separation steps in a brewing process: lautering, trub separation, and beer filtration; all of these can also separate foam negative substances. This short article discusses how a pH during sparging can influence foam stability. It seems that the lower the pH, the fewer foam negative substances are carried over to the following production steps of a brewing process.
- 26 March 2020
- Published by Research Institute of Brewing and Malting, Plc. (Vyzkumny Ustav Pivovarsky a Sladarsky) in KVASNY PRUMYSL
- Vol. 66 (2) , 261-263
Open AccessImproving foam stability and lautering conditions
How to increase foam stability without adding foam stabilizers? As we published earlier, there was more than a sufficient amount of foam stabilizing substances in beer, but these must not be pushed out of the beer surface by foam negative substances. There are several separation steps in a brewing process: lautering, trub separation, and beer filtration; all of these can also separate foam negative substances. This short article discusses how a pH during sparging can influence foam stability. It seems that the lower the pH, the fewer foam negative substances are carried over to the following production steps of a brewing process.
- Open Access
- 1 January 2018
- Published by Taylor & Francis in Journal of the American Society of Brewing Chemists
- Vol. 76 (1) , 58-61
Use of Sorbents to Increase Beer Foam Stability
Long-lasting creamy foam is an important quality parameter for various types of beers. Foam stability depends on both foam-stabilizing and foam-damaging compounds, and lipids are considered to be the main foam-damaging compounds. The aim of this work was to validate a technologically and economically feasible method for stabilizing beer foam using sorption. Among eight materials tested for their foam stabilizing effects (activated carbon, Florisil, polytetrafluoroethylene, montmorillonite, filter sheet, steel dust, cotton, and polyethylene), three were selected for further study to verify their effects on color, bitterness, and the sensory profile of a commercial lager beer. The results showed that the foam stabilizing effect of sorbents were positively correlated with their surface areas. The most promising sorbents (activated carbon, Florisil, and polytetrafluoroethylene) were effective at low doses (50 mg/L) and short contact times (5 min), and did not affect the color, bitterness, or sensory profile of the beer. At the low dose required and the price of sorbents, their single use in combination with other process aids and subsequent filtration should be economically feasible.
- 1 January 2018
- Published by Taylor & Francis in Journal of the American Society of Brewing Chemists
- Vol. 76 (1) , 58-61
Open AccessUse of Sorbents to Increase Beer Foam Stability
Long-lasting creamy foam is an important quality parameter for various types of beers. Foam stability depends on both foam-stabilizing and foam-damaging compounds, and lipids are considered to be the main foam-damaging compounds. The aim of this work was to validate a technologically and economically feasible method for stabilizing beer foam using sorption. Among eight materials tested for their foam stabilizing effects (activated carbon, Florisil, polytetrafluoroethylene, montmorillonite, filter sheet, steel dust, cotton, and polyethylene), three were selected for further study to verify their effects on color, bitterness, and the sensory profile of a commercial lager beer. The results showed that the foam stabilizing effect of sorbents were positively correlated with their surface areas. The most promising sorbents (activated carbon, Florisil, and polytetrafluoroethylene) were effective at low doses (50 mg/L) and short contact times (5 min), and did not affect the color, bitterness, or sensory profile of the beer. At the low dose required and the price of sorbents, their single use in combination with other process aids and subsequent filtration should be economically feasible.
- 25 March 2016
- Published by Research Institute of Brewing and Malting, Plc. (Vyzkumny Ustav Pivovarsky a Sladarsky) in KVASNY PRUMYSL
- Vol. 62 (3) , 90-93
Vertical Refractometer for the Monitoring of Main Fermentation
- 25 March 2016
- Published by Research Institute of Brewing and Malting, Plc. (Vyzkumny Ustav Pivovarsky a Sladarsky) in KVASNY PRUMYSL
- Vol. 62 (3) , 90-93
Vertical Refractometer for the Monitoring of Main Fermentation
- 1 April 2012
- Published by Taylor & Francis in Journal of the American Society of Brewing Chemists
- Vol. 70 (2) , 103-108
How the Method of Beer Dispense Influences the Served CO2Content and the Sensory Profile of Beer
The CO2 content of draught beer is usually considered to be a function of the original packaged beer CO2 content, the dispensing gas, and its pressure. This does not take into account one important parameter, which is the influence of the technique of beer dispense on the eventual CO2 content of beer in glass. The dispense of beer while minimizing foam creation, dispense in one draught, results in the beer in glass CO2 content being close to that of the original bottle or keg CO2 content of beer. For the tasters and lager beer in this study, such dispense technique results in higher carbonation flavor and also a more bitter taste, with more harsh bitterness character. Beer dispensed by one draught also emphasizes if the beer suffers from undesirable diacetyl off-flavor that was added in this study. In contrast, beer dispensed by a three-draught technique that has much in common with the legendary German “seven-minute-pils” provided beer that was considered to be superior in overall flavor. With the three-draught dispense technique, the first draught converted all the beer to foam on dispense, resulting in a substantial reduction in beer CO2 content. The subsequent two draughts also result in further CO2 loss, finally presenting a beer with a substantially lower CO2 content. Lager beer dispensed by this technique was superior in flavor in terms of finer bitterness character and intensity and less emphasis of diacetyl off flavor. A formula was developed to accurately predict the eventual beer CO2 content as a function of the amount of beer foam produced during dispense. These relationships are important not only for dispense recommendations to bartenders for optimal beer serving but also when preparing samples for degustation.
- 1 April 2012
- Published by Taylor & Francis in Journal of the American Society of Brewing Chemists
- Vol. 70 (2) , 103-108
How the Method of Beer Dispense Influences the Served CO2Content and the Sensory Profile of Beer
The CO2 content of draught beer is usually considered to be a function of the original packaged beer CO2 content, the dispensing gas, and its pressure. This does not take into account one important parameter, which is the influence of the technique of beer dispense on the eventual CO2 content of beer in glass. The dispense of beer while minimizing foam creation, dispense in one draught, results in the beer in glass CO2 content being close to that of the original bottle or keg CO2 content of beer. For the tasters and lager beer in this study, such dispense technique results in higher carbonation flavor and also a more bitter taste, with more harsh bitterness character. Beer dispensed by one draught also emphasizes if the beer suffers from undesirable diacetyl off-flavor that was added in this study. In contrast, beer dispensed by a three-draught technique that has much in common with the legendary German “seven-minute-pils” provided beer that was considered to be superior in overall flavor. With the three-draught dispense technique, the first draught converted all the beer to foam on dispense, resulting in a substantial reduction in beer CO2 content. The subsequent two draughts also result in further CO2 loss, finally presenting a beer with a substantially lower CO2 content. Lager beer dispensed by this technique was superior in flavor in terms of finer bitterness character and intensity and less emphasis of diacetyl off flavor. A formula was developed to accurately predict the eventual beer CO2 content as a function of the amount of beer foam produced during dispense. These relationships are important not only for dispense recommendations to bartenders for optimal beer serving but also when preparing samples for degustation.