New method to characterize a machining system: application in turning
Authors:
- Claudiu-Florinel BisuCBClaudiu-Florinel Bisu
- Jean-Yves K'NevezJKJean-Yves K'Nevez
- Alain GérardAGAlain Gérard
Preprint
Abstract
Many studies simulates the machining process by using a single degree of freedom spring-mass sytem to model the tool stiffness, or the workpiece stiffness, or the unit tool-workpiece stiffness in modelings 2D. Others impose the tool action, or use more or less complex modelings of the efforts applied by the tool taking account the tool geometry. Thus, all these models remain two-dimensional or sometimes partially three-dimensional. This paper aims at developing an experimental method allowing to determine accurately the real three-dimensional behaviour of a machining system (machine tool, cutting tool, tool-holder and associated system of force metrology six-component dynamometer). In the work-space model of machining, a new experimental procedure is implemented to determine the machining system elastic behaviour. An experimental study of machining system is presented. We propose a machining system static characterization. A decomposition in two distinct blocks of the system "Workpiece-Tool-Machine" is realized. The block Tool and the block Workpiece are studied and characterized separately by matrix stiffness and displacement (three translations and three rotations). The Castigliano's theory allows us to calculate the total stiffness matrix and the total displacement matrix. A stiffness center point and a plan of tool tip static displacement are presented in agreement with the turning machining dynamic model and especially during the self induced vibration. These results are necessary to have a good three-dimensional machining system dynamic characterization.Keywords
All Related Versions
This publication has 25 references indexed in Scilit:
- Displacements analysis of self-excited vibrations in turningThe International Journal of Advanced Manufacturing Technology, 2008
- A new approach to identifying the elastic behaviour of a manufacturing machineInternational Journal of Machine Tools and Manufacture, 2008
- Stability analysis of turning process with tailstock-supported workpieceThe International Journal of Advanced Manufacturing Technology, 2008
- On nonlinear cutting response and tool chatter in turning operationCommunications in Nonlinear Science and Numerical Simulation, 2008
- Correction of dynamic effects on force measurements made with piezoelectric dynamometersInternational Journal of Machine Tools and Manufacture, 2006
- A stability analysis of regenerative chatter in turning process without using tailstockThe International Journal of Advanced Manufacturing Technology, 2006
- Investigation of the effect of rake angle and approaching angle on main cutting force and tool tip temperatureInternational Journal of Machine Tools and Manufacture, 2006
- A stability analysis of turning a tailstock supported flexible work-pieceInternational Journal of Machine Tools and Manufacture, 2005
- Evaluation of the stiffness chain on the deflection of end-mills under cutting forcesInternational Journal of Machine Tools and Manufacture, 2005
- STABILITY ANALYSIS OF SPINNING STEPPED-SHAFT WORKPIECES IN A TURNING PROCESSJournal of Sound and Vibration, 2002