Hydraulic Modeling Helps Designing Ultralow ECD Nonaqueous Fluids to Meet Narrow ECD Windows
Authors:
- 12 November 2018
- conference paper
- Published by Society of Petroleum Engineers (SPE)
Abstract
Hydraulic modeling was used to simulate the effect of fluid rheology (both high- and low-shear-rate rheology) on the equivalent circulating density (ECD) at critical points in the well. The modeling results provided a guide for the design of nonaqueous fluid properties necessary to achieve the required ultralow ECD values. Using a combination of a rheology modifier and a new low-end fluid rheology enhancer, ultralow ECD nonaqueous fluids were successfully developed to meet the fluid rheology and barire sag requirement. The low-end fluid rheology enhancer provided a desired gel structure that helps minimize barite sag, which is often the concern for low-rheology nonaqueous fluids. The hydraulic modeling results showed that, although both high- and low-shear-rate fluid rheology must be very low to achieve ultralow ECD values, the reduction of high-shear-rate rheology has a larger effect on the reduction of ECD values. For a given ECD value, a fluid with a lower high-shear-rate rheology and higher low-shear-rate rheology is preferred because the higher low-shear-rate rheology is due to a much-desired gel structure that helps reduce barite sag during static aging. Hole cleaning is also expected to improve with higher low-shear-rate rheology. Based on this information, a 14.0-lbm/gal clay-free nonaqueous drilling fluid was successfully formulated to achieve the required ECD without the use of micronized barite. As described, the fluid uses the combination of two rheology modifiers, one of which functions as a gel strength enhancer that provides the much-needed gel structure to minimize barite sag.Keywords
This publication has 10 references indexed in Scilit:
- The Evaluation of Micronized Barite As a Weighting Material for Completing HPHT Wells2017
- Innovative Low-ECD Organo-Clay-Free Invert Emulsion Fluid OCF-IEF System Helped Operations Hit Target2016
- Use of Specially Treated Micronized Barite Fluid System with Wellbore Strengthening Approach to Drill Extremely Depleted Reservoir - HPHT Kvitebjørn Field, Offshore Norway2016
- Field Application of an Innovative, Minimally Damaging Low-ECD Invert Emulsion Fluid for Drilling and Completion of HP/HT Wells: Update on Fluid Performance2016
- Use of Micronized Particle Drilling Fluid in Narrow PP-FG Margin Wells - A Case Study of RX-112015
- Development and Field Application of an Innovative, Minimally Damaging, Low-ECD Invert Emulsion Fluid for Enhanced Drilling and Completion of HP/HT Wells2015
- Defining Fragile - The Challenge of Engineering Drilling Fluids for Narrow ECD Windows2015
- A Significant MWD Tool Signal Strength Improvement: Another Advantage of Using a Treated Micronized Barite Drilling Fluid System2012
- Successful Drilling of a Deviated, Ultra-HTHP Well Using a Micronised Barite Fluid2009
- Formation-Damage Observations on Oil-Based-Fluid Systems Weighted With Treated Micronized Barite2007