Abstract
The dc marine integrated power system uses the active front-end (AFE) rectifiers widely to stabilize the dc bus voltage. However, AFE rectifiers are vulnerable to switch open-circuit faults, which challenge the stability and reliability of the system. Many existing works have been devoted to studying the fault-tolerant control (FTC) of rectifiers, but the adopted space vector replacement and additional control modules only compensate for the vector synthesis partly, which reduces the ability to control the dc voltage. This article proposes a q-axis current injection FTC method that enables the converter to operate normally and reduce the dc voltage ripple. The space vector model considering the coupling of control and electrical vectors is established to determine the fault deviation and affected space sectors. The faulty active vectors are reactivated by changing the q-axis current. The modified modulation is the faulty zero vector replacement realized by changing the turn-on time of each switch. The distorted reference voltage vector can be effectively revised with the q-axis current injection and the space vector fault-tolerant modulation. Hardware-in-the-loop (HIL) testing and experimental results verify that the dc voltage ripple is less than 1% under single-switch faults with the proposed method. Compared to the existing FTC methods, such as projection compensation and zero vector replacement, the dc voltage ripple with the proposed method can be reduced by 33%~89% without compromising the fault recovery time.
Funding Information
  • National Natural Science Foundation of China (52177100)
  • Shanghai Rising-Star Program (22QA1404300)
  • National Key Research and Development Program of China (2024YFE0209800)

This publication has 30 references indexed in Scilit: