Influence of Mesostructure in Natural Rubber on Mechanical, Dynamic Mechanical, and Thermomechanical Properties of Several Hevea brasiliensis Clones
Open Access
- 1 January 2026
- journal article
- Published by Wiley in International Journal of Polymer Science
- Vol. 2026 (1) , 8121720
Abstract
This study focused primarily on the relationship between mesostructure and the final vulcanizate performance of solid natural rubber (NR) derived from three Hevea brasiliensis clones: RRIM600, RRIT251, and PB235. The evaluated mesostructural characteristics included molecular weight (Mw), polydispersity index (PDI), molar mass distribution (MMD), and protein content. The RRIM600 and RRIT251 clones exhibited a bimodal MMD and a broad PDI, which correlated with their higher protein content. Notably, the RRIM600 clone demonstrated superior mechanical properties, including 500% modulus (5.21 MPa), tensile strength (27.19 MPa), tear strength (27.38 N mm −1 ), and rebound resilience (73.30%). It also showed enhanced thermal–mechanical stability, with a T90 of 213.5°C determined via temperature scanning stress relaxation (TSSR). Furthermore, the physical relaxation peaks in the TSSR spectrum were found to be strongly related to the protein content of the NR. Dynamic mechanical thermal analysis (DMTA) also revealed higher storage and loss modulus for RRIM600, indicating superior elasticity. Conversely, the PB235 clone displayed a unimodal MMD and the highest M w , signifying longer macromolecular chains that resulted in higher initial plasticity, minimum torque, and elongation at break. Overall, this research provides crucial insights for selecting appropriate NR clones to manufacture high‐performance rubber products.Keywords
Funding Information
- Prince of Songkla University (SCIEQUIP664001)
This publication has 46 references indexed in Scilit:
- Exploring the influence of Hevea brasiliensis clones on the extraordinary properties of natural rubber vulcanizatesPolymer Bulletin, 2024
- Effect of natural extract from waste corn meal on stabilization of natural rubberSPE Polymers, 2021
- Influence of nonrubber components on properties of unvulcanized natural rubberPolymers for Advanced Technologies, 2019
- Effect of non-rubber components on the mechanical properties of natural rubberPolymers for Advanced Technologies, 2016
- Prediction models for the key mechanical properties of EPDM/PP blends as affected by processing parameters and their correlation with stress relaxation and phase morphologiesPolymers for Advanced Technologies, 2015
- Lipid compositions of latex and sheet rubber from Hevea brasiliensis depend on clonal originEuropean Journal of Lipid Science and Technology, 2013
- SEC‐MALS study of dynamic structuring of natural rubber: Comparative study of two Hevea brasiliensis genotypesJournal of Applied Polymer Science, 2011
- Effect of cross‐linking on the free volume properties of natural rubberphysica status solidi (c), 2007
- Crosslink Density of Peroxide Cured TPVMacromolecular Symposia, 2006
- Investigation of modified SEBS‐based thermoplastic elastomers by temperature scanning stress relaxation measurementsPolymer Engineering & Science, 2005