Mechanism Analysis of Pressure Impacts on Turn-Off Transient Process in Single Press-Pack IGBT Chip
- 3 March 2026
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 41 (9) , 14596-14613
Abstract
For press-pack insulated gate bipolar transistors (PPIs), an external clamping force is applied to ensure adequate electrical contact between multilayers. The resulting pressure field significantly influences the chip's turn-off capability and is attracting increasing attention. In this article, the pressure effects on the overall turn-off transient of a PPI chip are investigated comprehensively through theoretical analysis, experimental measurements, and semiconductor simulations. Under high-voltage/high-current conditions, as pressure non-uniformity increases, dynamic avalanche and the ensuing current filaments are triggered earlier and persist longer, increasing the risk of failure. In non-destructive experiments, the pressure non-uniformity on the chip is increased stepwise by raising the clamping force. Around the nominal clamping force, a 1 kN increase reduces the dynamic avalanche onset voltage by about 200 V. Two-cell simulations indicate that current filaments form following the onset of dynamic avalanche, leading to a 41% rise in the maximum current density Jmax. This increase intensifies the maximum localized electro-thermal stress and continues to grow with time. In practice, Jmax and its effects are considerably larger than suggested by the simulations, because real PPI chips comprise far more cells, which promotes stronger filament localization.Keywords
Funding Information
- National Natural Science Fund for Distinguished Young Scholars (52225701)
This publication has 28 references indexed in Scilit:
- Determination of the thermal and electrical contact resistance in press-pack IGBTs2013
- Investigations on the stability of dynamic avalanche in IGBTs2003
- Dynamic avalanche and reliability of high voltage diodesMicroelectronics Reliability, 2003
- 2.5 kV 100 A μ-stack IGBT2002
- Ruggedness and reliability of the 2.5 kV-1.8 kA power pack IGBT with a novel multi-collector structure2002
- A highly reliable press packed IGBTElectrical Engineering in Japan, 2000
- Current filamentation in bipolar power devices during dynamic avalanche breakdownSolid-State Electronics, 2000
- 2.5 kV-100 A flat-packaged IGBT (micro-stack IGBT)IEEE Transactions on Electron Devices, 1996
- Analytical model for the destruction mechanism of GTO-like devices by avalanche injectionIEEE Transactions on Electron Devices, 1991
- Dynamischer Avalanche beim Abschalten von GTO-Thyristoren und IGBTsElectrical Engineering, 1989