Study on preparation process parameters and tribological properties of porous PI materials
Authors:
- 18 January 2022
- journal article
- research article
- Published by Emerald Publishing in Industrial Lubrication and Tribology
- Vol. 74 (2) , 205-210
Abstract
Purpose: Previously, the effect of pore-forming agents on the properties of pore size and morphology was studied. In this paper, we determine the optimal combination of parameters by tensile strength and perform tribological tests with optimal combination of parameters. Design/methodology/approach: In this paper, porous polyimide (PI) materials were fabricated using vacuum hot molding technology. The orthogonal experiment was designed to test the mechanical properties of porous PI materials with the process parameters and the content of pore-forming agent as the changing factors. The porous PI oil-bearing materials were obtained by vacuum immersion, and tribological test were carried out. Findings: The results showed that porous PI oil-bearing materials are suitable for low-speed and low-load conditions. The actual value of the friction coefficient basically match with the theoretical value of the regression analysis, and the errors of the friction coefficient are within 10% and 3%, respectively, which proves that the method used in the study is feasible for the friction coefficient prediction. Originality/value: In this paper, we have produced a new porous oil-bearing material with good tribological properties. This study can effectively predict the friction coefficient of PI porous material.Keywords
This publication has 17 references indexed in Scilit:
- Self-lubricating icephobic elastomer coating (SLIC) for ultralow ice adhesion with enhanced durabilityCold Regions Science and Technology, 2018
- Tribological behavior of M50-MoS 2 self-lubricating composites from 150 to 450 °CMaterials Chemistry and Physics, 2017
- Investigation of porous polyimide lubricant retainers to improve the performance of rolling bearings under conditions of starved lubricationWear, 2017
- Hybrid effect of ZnS sub-micrometer particles and reinforcing fibers on tribological performance of polyimide under oil lubrication conditionsWear, 2017
- Preparation and tribological properties of PI oil-bearing material with controllable pore sizeIndustrial Lubrication and Tribology, 2017
- Latest progress on tribological properties of industrial materialsMaterials & Design (1980-2015), 2014
- Influence of Process Parameters on the Mechanical and Foaming Properties of PP Polymer and PP/TALC/EPDM CompositesPolymer-Plastics Technology and Engineering, 2013
- Synthesis and Tribological Properties of Thermosetting Polyimide and Its Carbon Nanotube-Containing CompositesPolymer-Plastics Technology and Engineering, 2012
- Friction and wear behaviours of some industrial polyamides against different polymer counterparts under dry conditionsIndustrial Lubrication and Tribology, 2008
- Tribology performances of molybdenum disulfide reinforced thermoplastic polyimide under dry and water lubrication conditionsIndustrial Lubrication and Tribology, 2006