Fast-Speed Drives for Permanent Magnet Synchronous Motor Based on Model Predictive Control
- 1 October 2015
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-6
Abstract
Fast speed-tracking with limits commitment for currents and voltages of drivetrain is crucial for EV/HEV. This study proposes a fast-speed drive for permanent magnet synchronous motor (PMSM) based on Model Predictive Control (MPC). Fast speed tracking is achieved through optimization of the DC source utilization. With common torque and current limits, the proposed technique predicts the optimum voltage vector applied to the driver. The performance of the PMSM under Field Oriented Control (FOC) and MPC is first analyzed by a simulation study at different working circumstances. The effectiveness of the proposed MPC has been validated by simulation results. Then, an experimental setup has been established for the PMSM drive using a TMS320F2812 DSP. The effectiveness of the proposed MPC has been validated by experimental results. With simulation and experimental results, the presented MPC has been investigated by comparing to the cascaded PI control based on SVPWM to highlight the improvements, especially regarding speed tracking response.Keywords
This publication has 9 references indexed in Scilit:
- Operating Constraints Management of a Surface-Mounted PM Synchronous Machine by Means of an FPGA-Based Model Predictive Control AlgorithmIEEE Transactions on Industrial Informatics, 2013
- Predictive Control of Power Converters and Electrical Drives2012
- Speed Control for PMSM Servo System Using Predictive Functional Control and Extended State ObserverIEEE Transactions on Industrial Electronics, 2011
- Model Predictive Idle Speed Control: Design, Analysis, and Experimental EvaluationIEEE Transactions on Control Systems Technology, 2011
- Fast torque control system of PMSM based on model predictive control2009
- A Comparative Study of Predictive Current Control Schemes for a Permanent-Magnet Synchronous Machine DriveIEEE Transactions on Industrial Electronics, 2009
- Model Predictive Control—A Simple and Powerful Method to Control Power ConvertersIEEE Transactions on Industrial Electronics, 2008
- Design and Implementation of Model Predictive Control for Electrical Motor DrivesIEEE Transactions on Industrial Electronics, 2008
- Predictive Control in Power Electronics and DrivesIEEE Transactions on Industrial Electronics, 2008