Influence of polarity on mechanical properties of dissimilar resistance spot welds of DP 600/AISI 304 steels
- 18 May 2016
- journal article
- research article
- Published by SAGE Publications in Science and Technology of Welding and Joining
- Vol. 21 (8) , 607-613
Abstract
The influence of polarity during resistance spot weld (RSW) of dissimilar lap joints on mechanical properties and failure mode is assessed in this work. A dissimilar lap joint was set using DP 600 dual phase steel with AISI 304 stainless steel. The experiments were performed on a medium-frequency direct current spot welding machine with proper data acquisition of voltage and welding current. Temperature evolution was also acquired by using IR camera. The mechanical properties of spot welds were evaluated by using a coach peel testing. The effect of welding current and welding time on mechanical properties was also evaluated. Correlations between polarity with the welding nugget size, failure mode, tensile strength, temperature evolution and dynamic resistance were analysed. The analysis confirmed that the polarity on dissimilar lap joints affects the behaviour of dissimilar RSWs.Keywords
This publication has 17 references indexed in Scilit:
- Effect of resistance spot welding parameters on weld pool properties in a DP600 dual-phase steel: A parametric study using thermomechanically-coupled finite element analysisMaterials & Design (1980-2015), 2014
- Mechanical properties and microstructures of resistance spot welded DP980 steel joints using pulsed current patternScience and Technology of Welding and Joining, 2014
- Critical review of automotive steels spot welding: process, structure and propertiesScience and Technology of Welding and Joining, 2013
- Quality Control of Resistance Spot Welding of High Strength SteelsProcedia CIRP, 2013
- Dissimilar resistance spot welding of DP600 dual phase and AISI 1008 low carbon steels: correlation between weld microstructure and mechanical propertiesIronmaking & Steelmaking: Processes, Products and Applications, 2011
- Modeling of resistance spot welding of multiple stacks of steel sheetsMaterials & Design (1980-2015), 2011
- A comparison of the mechanical behaviour of self-piercing riveted and resistance spot welded aluminium sheets for the automotive industryMaterials & Design (1980-2015), 2010
- Welding behaviour, microstructure and mechanical properties of dissimilar resistance spot welds between galvannealed HSLA350 and DP600 steelsScience and Technology of Welding and Joining, 2009
- Resistance spot weldability of dissimilar materials (AISI 316L–DIN EN 10130-99 steels)Materials & Design (1980-2015), 2007
- On the resistance spot weldability of galvanized interstitial free steel sheets with austenitic stainless steel sheetsJournal of Materials Processing Technology, 2004