Interactions between Metallic Interconnects and Ceramic Electrodes in SOFC Operating Environments: Air Side
Authors:
- 1 January 2012
- journal article
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 159 (11) , C476-C484
Abstract
Ferritic stainless steel (FSS) bipolar plates are widely used to interconnect individual cells in planar Solid Oxide Fuel Cell (SOFC) stacks. In this study, thin films of ceramic and cermet electrode materials, La0.8Sr0.2MnO3 (LSM) for the cathode and Ni-Y2O3/ZrO2 (Ni-YSZ) for the anode, were screen printed on Sanvik's Sanergy HT, a specialty FSS alloy (with and without Co or Co/Ce surface coatings). Samples were then placed in a test rig which allows simultaneous exposures to humidified (3% H2O) single (air/air) and dual atmospheres (air/H2) at 800°C for 100 hours. This research is focused on the FSS surface oxide layers and the phenomena governing materials interactions during realistic SOFC exposures that drive degradation. The surface oxide layer composition and morphology are heavily influenced by the dual atmosphere exposures and contact with electrode materials. For example, air-side surface oxide layers are generally thicker and contain more Fe than those formed in single-atmospheres, and surface oxide layer thickness and composition is altered in the presence of contacting electrodes in comparison with gas-only exposures. These and other recent data suggest that corrosion studies performed without relevant SOFC stack environments (e.g., air-only and without contacting electrodes) may not reveal all of the pertinent high-temperature behaviors.Keywords
This publication has 42 references indexed in Scilit:
- Chromium deposition and poisoning in dry and humidified air at (La0.8Sr0.2)0.9MnO3+ cathodes of solid oxide fuel cellsInternational Journal of Hydrogen Energy, 2010
- Interaction between (La, Sr)MnO3 cathode and Ni–Mo–Cr metallic interconnect with suppressed chromium vaporization for solid oxide fuel cellsInternational Journal of Hydrogen Energy, 2009
- Effect of cathode and electrolyte transport properties on chromium poisoning in solid oxide fuel cellsInternational Journal of Hydrogen Energy, 2007
- Dual-Environment Effects on the Oxidation of Metallic InterconnectsJournal of Materials Engineering and Performance, 2006
- Thermal Growth and Performance of Manganese Cobaltite Spinel Protection Layers on Ferritic Stainless Steel SOFC InterconnectsJournal of the Electrochemical Society, 2005
- Mn[sub 1.5]Co[sub 1.5]O[sub 4] Spinel Protection Layers on Ferritic Stainless Steels for SOFC Interconnect ApplicationsElectrochemical and Solid-State Letters, 2005
- Structure and Conductivity of Thermally Grown Scales on Ferritic Fe-Cr-Mn Steel for SOFC Interconnect ApplicationsJournal of the Electrochemical Society, 2004
- Oxidation Behavior of Ferritic Stainless Steels under SOFC Interconnect Exposure ConditionsJournal of the Electrochemical Society, 2004
- Compressive mica seals for SOFC applicationsJournal of Power Sources, 2001
- Interaction between chromia forming alloy interconnects and air electrode of solid oxide fuel cellsSolid State Ionics, 1997