Paul Gannon
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Paul Gannon has a total of 30 co-authors. Here are the top co-authors by number of shared publications:
- Nick Lux
Montana State University
5 shared publications - Rebekah Hammack
Purdue University
5 shared publications A. J. Weisenstein
Department of Mechanical Engineering, Montana State University, Bozeman, Montana 59717-3920, USA
1 shared publicationAbigail Richards
Montana State University - Bozeman
1 shared publication- Blake Wiehe
Department of Education, Montana State University, Bozeman, MT 59717, USA
1 shared publication C. Bowman
Arcomac Surface Engineering, LLC, Bozeman, Montana 59715, USA
1 shared publication
Latest Publications
- Open Access
- 7 August 2024
- Published by ISTES Organization in International Journal of Education in Mathematics, Science and Technology
- Vol. 12 (4) , 1090-1108
Technology-rich Engineering Experiences in Indigenous and Rural Schools
Indigenous populations, constituting 6.2% of the global population, face challenges in STEM education due to systemic barriers and limited exposure to science and engineering. Our research, part of a federally funded project, aimed to address these challenges by implementing Community-Based Engineering (CBE) education in an elementary school located on a Native American Reservation in the United States. In this paper, we used CBE as our theoretical framework situating engineering within the context of students' communities and cultures. Our participants included 15 students and two Native American teachers with varying teaching experience. We employed mixed methods and combined quantitative tools such as the Engineering Identity Development Scale and the Engineering Technology subscale of the S-STEM survey, with qualitative data from teacher and student interviews. Our analysis revealed significant changes in students' perceptions of engineering for their communities and their personal engineering identities after they engaged with CBE lessons. We also found that the cultural connections to community were evident in student interviews. Furthermore, teachers appreciated CBE and emphasized that these engineering lessons enrich their rich traditions and practices. This study highlights the effectiveness of CBE and demonstrates how engineering education can be more inclusive and resonant with Indigenous students.
- 7 August 2024
- Published by ISTES Organization in International Journal of Education in Mathematics, Science and Technology
- Vol. 12 (4) , 1090-1108
Open AccessTechnology-rich Engineering Experiences in Indigenous and Rural Schools
Indigenous populations, constituting 6.2% of the global population, face challenges in STEM education due to systemic barriers and limited exposure to science and engineering. Our research, part of a federally funded project, aimed to address these challenges by implementing Community-Based Engineering (CBE) education in an elementary school located on a Native American Reservation in the United States. In this paper, we used CBE as our theoretical framework situating engineering within the context of students' communities and cultures. Our participants included 15 students and two Native American teachers with varying teaching experience. We employed mixed methods and combined quantitative tools such as the Engineering Identity Development Scale and the Engineering Technology subscale of the S-STEM survey, with qualitative data from teacher and student interviews. Our analysis revealed significant changes in students' perceptions of engineering for their communities and their personal engineering identities after they engaged with CBE lessons. We also found that the cultural connections to community were evident in student interviews. Furthermore, teachers appreciated CBE and emphasized that these engineering lessons enrich their rich traditions and practices. This study highlights the effectiveness of CBE and demonstrates how engineering education can be more inclusive and resonant with Indigenous students.
- Open Access
- 31 January 2024
- Published by Royal Society of Chemistry (RSC) in Energy Advances
- Vol. 3 (3) , 614-624
In situ surface monitoring of energy materials during processing: impact of defect disorder on surface versus bulk semiconducting properties of photocatalytic hematite (Fe 2 O 3 )
Rational design of surface properties of oxide semiconductors for energy conversion requires in situ surface characterization.
- 31 January 2024
- Published by Royal Society of Chemistry (RSC) in Energy Advances
- Vol. 3 (3) , 614-624
Open AccessIn situ surface monitoring of energy materials during processing: impact of defect disorder on surface versus bulk semiconducting properties of photocatalytic hematite (Fe 2 O 3 )
Rational design of surface properties of oxide semiconductors for energy conversion requires in situ surface characterization.
- Open Access
- 24 April 2023
- Published by MDPI AG in Education Sciences
- Vol. 13 (5) , 434
Empowering Elementary Students with Community-Based Engineering: A Teacher’s Experience in a Rural School District
This paper presents a case study of an elementary teacher, Holly, who participated in a federally funded summer professional development (PD) program aimed at integrating community-based engineering into elementary education. The study examines how Holly’s teaching practices and beliefs about teaching engineering contributed to the significant improvements in her students’ attitudes toward engineering and their perceptions of engineering as a potential career. Data were collected over three years through multiple methods, including post-PD interviews, lesson recordings, and a post-teaching interview. We analyzed classroom videos using a video analysis protocol. We used open coding to analyze the interviews. Once the analysis of the interviews and videos was completed, we engaged in a sense-making process to identify connections across data points (videos and interviews). Our findings showed that Holly extensively incorporated scientific inquiry into her lessons. This approach enabled students to develop their inquiry skills and facilitated a smooth transition to engineering design activities. By connecting class activities to the local context, students were able to see the relevance of engineering to their everyday lives and take ownership of their learning. This study emphasizes the potential of community-focused engineering to foster meaningful science and engineering practices in elementary education.
- 24 April 2023
- Published by MDPI AG in Education Sciences
- Vol. 13 (5) , 434
Open AccessEmpowering Elementary Students with Community-Based Engineering: A Teacher’s Experience in a Rural School District
This paper presents a case study of an elementary teacher, Holly, who participated in a federally funded summer professional development (PD) program aimed at integrating community-based engineering into elementary education. The study examines how Holly’s teaching practices and beliefs about teaching engineering contributed to the significant improvements in her students’ attitudes toward engineering and their perceptions of engineering as a potential career. Data were collected over three years through multiple methods, including post-PD interviews, lesson recordings, and a post-teaching interview. We analyzed classroom videos using a video analysis protocol. We used open coding to analyze the interviews. Once the analysis of the interviews and videos was completed, we engaged in a sense-making process to identify connections across data points (videos and interviews). Our findings showed that Holly extensively incorporated scientific inquiry into her lessons. This approach enabled students to develop their inquiry skills and facilitated a smooth transition to engineering design activities. By connecting class activities to the local context, students were able to see the relevance of engineering to their everyday lives and take ownership of their learning. This study emphasizes the potential of community-focused engineering to foster meaningful science and engineering practices in elementary education.
- Open Access
- 21 September 2022
- Published by MDPI AG in Education Sciences
- Vol. 12 (10) , 637
Building Primary Preservice Teachers’ Identity as Engineering Educators
The purpose of this qualitative case study was to investigate how two primary preservice teachers built their engineering education identities during a clinical field experience that emphasized engineering education. More specifically, we explored the development of their engineering education identities while facing unforeseen circumstances and unfamiliar engineering content. We used a nested qualitative case study approach that was bounded by a university practicum field experience that took place at the height of the COVID-19 pandemic. Data sources included preservice teacher interviews and reflective field notes. We found that the preservice teachers faced a series of contextual factors in the clinical experience that both afforded and constrained professional learning opportunities that influenced their identity development. The affordances made professional learning opportunities possible, while the constraints limited professional growth. We also found that it was the negotiation of the factors, where the preservice teachers worked to mitigate the effect of the constraints while maximizing the advantages of the affordances, that had the greatest influence on their engineering pedagogical knowledge and engineering teaching self-efficacy. Findings from this study could provide teacher educators with insight into preparing primary teachers for unexpected challenges when teaching engineering, as well as how to best prepare engineering-efficacious teachers.
- 21 September 2022
- Published by MDPI AG in Education Sciences
- Vol. 12 (10) , 637
Open AccessBuilding Primary Preservice Teachers’ Identity as Engineering Educators
The purpose of this qualitative case study was to investigate how two primary preservice teachers built their engineering education identities during a clinical field experience that emphasized engineering education. More specifically, we explored the development of their engineering education identities while facing unforeseen circumstances and unfamiliar engineering content. We used a nested qualitative case study approach that was bounded by a university practicum field experience that took place at the height of the COVID-19 pandemic. Data sources included preservice teacher interviews and reflective field notes. We found that the preservice teachers faced a series of contextual factors in the clinical experience that both afforded and constrained professional learning opportunities that influenced their identity development. The affordances made professional learning opportunities possible, while the constraints limited professional growth. We also found that it was the negotiation of the factors, where the preservice teachers worked to mitigate the effect of the constraints while maximizing the advantages of the affordances, that had the greatest influence on their engineering pedagogical knowledge and engineering teaching self-efficacy. Findings from this study could provide teacher educators with insight into preparing primary teachers for unexpected challenges when teaching engineering, as well as how to best prepare engineering-efficacious teachers.
- Open Access
- 18 July 2018
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 165 (10) , C624-C632
XPS Characterization of Aluminosilicate Fibers Post Interaction with Chromium Oxyhydroxide at 100–230°C
Chromium containing materials, e.g. stainless steels, are commonly used in high temperature (>500°C) applications such as solid oxide fuel cell (SOFC) stacks, combustion exhaust systems, and in various chemical process equipment. At these temperatures and in oxidizing atmospheres, chromium oxide (chromia) surface layers form and grow, effectively protecting the underlying alloy. Also known to form under these conditions, however, are volatile chromium species such as CrO2(OH)2 and CrO3. Formation of these volatile species may have detrimental effects not only on the source material, but also on surrounding materials in the system which may interact with these species. To better understand how volatile chromium species interact with materials, volatile chromium species were generated from ferritic stainless steel (FSS) T409 at 700°C and directed into aluminosilicate fibers at 100–230°C for 150 hours. Post exposure fibers were noted to possess yellow, brown, and/or green stained regions which were isolated and characterized using X-ray photoelectron spectroscopy (XPS). Examination of Cr 2p3/2 peaks revealed varied Cr(VI) content and Cr(III) multiplet-split components for different discolored regions. Possible explanations for differences in chromium content by discoloration color are discussed.
- 18 July 2018
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 165 (10) , C624-C632
Open AccessXPS Characterization of Aluminosilicate Fibers Post Interaction with Chromium Oxyhydroxide at 100–230°C
Chromium containing materials, e.g. stainless steels, are commonly used in high temperature (>500°C) applications such as solid oxide fuel cell (SOFC) stacks, combustion exhaust systems, and in various chemical process equipment. At these temperatures and in oxidizing atmospheres, chromium oxide (chromia) surface layers form and grow, effectively protecting the underlying alloy. Also known to form under these conditions, however, are volatile chromium species such as CrO2(OH)2 and CrO3. Formation of these volatile species may have detrimental effects not only on the source material, but also on surrounding materials in the system which may interact with these species. To better understand how volatile chromium species interact with materials, volatile chromium species were generated from ferritic stainless steel (FSS) T409 at 700°C and directed into aluminosilicate fibers at 100–230°C for 150 hours. Post exposure fibers were noted to possess yellow, brown, and/or green stained regions which were isolated and characterized using X-ray photoelectron spectroscopy (XPS). Examination of Cr 2p3/2 peaks revealed varied Cr(VI) content and Cr(III) multiplet-split components for different discolored regions. Possible explanations for differences in chromium content by discoloration color are discussed.
- 1 January 2012
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 159 (11) , C476-C484
Interactions between Metallic Interconnects and Ceramic Electrodes in SOFC Operating Environments: Air Side
Ferritic stainless steel (FSS) bipolar plates are widely used to interconnect individual cells in planar Solid Oxide Fuel Cell (SOFC) stacks. In this study, thin films of ceramic and cermet electrode materials, La0.8Sr0.2MnO3 (LSM) for the cathode and Ni-Y2O3/ZrO2 (Ni-YSZ) for the anode, were screen printed on Sanvik's Sanergy HT, a specialty FSS alloy (with and without Co or Co/Ce surface coatings). Samples were then placed in a test rig which allows simultaneous exposures to humidified (3% H2O) single (air/air) and dual atmospheres (air/H2) at 800°C for 100 hours. This research is focused on the FSS surface oxide layers and the phenomena governing materials interactions during realistic SOFC exposures that drive degradation. The surface oxide layer composition and morphology are heavily influenced by the dual atmosphere exposures and contact with electrode materials. For example, air-side surface oxide layers are generally thicker and contain more Fe than those formed in single-atmospheres, and surface oxide layer thickness and composition is altered in the presence of contacting electrodes in comparison with gas-only exposures. These and other recent data suggest that corrosion studies performed without relevant SOFC stack environments (e.g., air-only and without contacting electrodes) may not reveal all of the pertinent high-temperature behaviors.
- 1 January 2012
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 159 (11) , C476-C484
Interactions between Metallic Interconnects and Ceramic Electrodes in SOFC Operating Environments: Air Side
Ferritic stainless steel (FSS) bipolar plates are widely used to interconnect individual cells in planar Solid Oxide Fuel Cell (SOFC) stacks. In this study, thin films of ceramic and cermet electrode materials, La0.8Sr0.2MnO3 (LSM) for the cathode and Ni-Y2O3/ZrO2 (Ni-YSZ) for the anode, were screen printed on Sanvik's Sanergy HT, a specialty FSS alloy (with and without Co or Co/Ce surface coatings). Samples were then placed in a test rig which allows simultaneous exposures to humidified (3% H2O) single (air/air) and dual atmospheres (air/H2) at 800°C for 100 hours. This research is focused on the FSS surface oxide layers and the phenomena governing materials interactions during realistic SOFC exposures that drive degradation. The surface oxide layer composition and morphology are heavily influenced by the dual atmosphere exposures and contact with electrode materials. For example, air-side surface oxide layers are generally thicker and contain more Fe than those formed in single-atmospheres, and surface oxide layer thickness and composition is altered in the presence of contacting electrodes in comparison with gas-only exposures. These and other recent data suggest that corrosion studies performed without relevant SOFC stack environments (e.g., air-only and without contacting electrodes) may not reveal all of the pertinent high-temperature behaviors.
- 1 January 2011
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 158 (5) , B526-B535
Evaluation of SOFC Interconnects Made of Ferritic Steels with Nano-Structured Oxi-Ceramic Protective Coatings Deposited by the LAFAD Process
When Solid Oxide Fuel Cells (SOFCs) are operated in the temperature range from 750 to 800°C, it becomes possible to use inexpensive ferritic steels as interconnects (ICs). Due to the demanding SOFC-IC operating environment, protective coatings are gaining attention as a way to increase long-term stability. In this study, the large area filtered arc deposition (LAFAD) process was used to deposit nano-structured coatings from the (Co,Mn)TiCrAlY(O,N) system. Both nano-laminated as well as nano-composite coating architectures were studied and compared. Coatings were deposited on ferritic steel with the aid of an ultra-thin, adhesion-promoting bond-coat, and were subsequently annealed in air for various time intervals. Surface oxidation was investigated using RBS, SEM, and EDS analyses. Cr-volatilization was evaluated using a modified transpiration apparatus and Area Specific Resistance (ASR) was studied as a function of time using a four-point technique. Significant improvement in oxidation resistance, Cr volatility, and ASR were observed in the coated samples. In addition, a set of sample IC plates were subjected to LAFAD coatings and tested in a SOFC stack. Transport mechanisms for various oxidizing species and coating diffusion barrier properties are discussed, as are the trades-offs between ionic diffusion and electronic conductivity.
- 1 January 2011
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 158 (5) , B526-B535
Evaluation of SOFC Interconnects Made of Ferritic Steels with Nano-Structured Oxi-Ceramic Protective Coatings Deposited by the LAFAD Process
When Solid Oxide Fuel Cells (SOFCs) are operated in the temperature range from 750 to 800°C, it becomes possible to use inexpensive ferritic steels as interconnects (ICs). Due to the demanding SOFC-IC operating environment, protective coatings are gaining attention as a way to increase long-term stability. In this study, the large area filtered arc deposition (LAFAD) process was used to deposit nano-structured coatings from the (Co,Mn)TiCrAlY(O,N) system. Both nano-laminated as well as nano-composite coating architectures were studied and compared. Coatings were deposited on ferritic steel with the aid of an ultra-thin, adhesion-promoting bond-coat, and were subsequently annealed in air for various time intervals. Surface oxidation was investigated using RBS, SEM, and EDS analyses. Cr-volatilization was evaluated using a modified transpiration apparatus and Area Specific Resistance (ASR) was studied as a function of time using a four-point technique. Significant improvement in oxidation resistance, Cr volatility, and ASR were observed in the coated samples. In addition, a set of sample IC plates were subjected to LAFAD coatings and tested in a SOFC stack. Transport mechanisms for various oxidizing species and coating diffusion barrier properties are discussed, as are the trades-offs between ionic diffusion and electronic conductivity.