A Turn-Ratio-Changing Half-Bridge CLLC DC–DC Bidirectional Battery Charger Using a GaN HEMT
Open Access
Abstract
This paper presents a 250 kHz bidirectional battery charger circuit using a GaN HEMT. The charger is subjected to a high-/low-side constant voltage at 200 V/20 V. The charger circuit is a hybrid of the LLC and flyback circuit topologies. Both the power output analysis and efficiency control of this circuit are simplified when the magnetization current is minimized using the low-resistance GaN HEMT. The switching frequency is controlled to match the series resonance in a way that is analogous to conventional LLC circuit controls, while the duty ratio that determines the power output and the dead time, which determines the zero voltage switching, is controlled in an analogous manner to the flyback circuit control. The charging and discharging modes were altered by applying a double-throw relay that changes the transformer turn ratio, which is different from conventional LLC designs using the switching frequency adjustment. A nominal turn ratio with Np = 35 and Ns = 3.5 for a 200 V/20 V converter can only produce an internal series resonance with no current flowing in any charging direction. The proposed circuit using a transformer with multiple windings (Np = 35, Ns,F = 4, and Ns,R = 3) was fabricated to deliver 125 W output power from the power grid battery to the vehicle battery in the forward (charging) mode and 90 W in the reverse (discharging) mode. The conversion efficiency was calculated to be as high as 97% in the forward mode and 95% in the reverse mode. The high conversion efficiency is due to the characteristics of the GaN HEMT, including low resistive and switching losses. The equations derived in this paper associate these losses with the series resonant frequency and power conversion rate, which highlight the advantages of using a GaN HEMT in this CLLC design.Keywords
Funding Information
- National Science and Technology council, R.O.C. (NSTC 112-2622-8-A49-013-SB)
This publication has 27 references indexed in Scilit:
- Extension of Zero Voltage Switching Capability for CLLC Resonant ConverterEnergies, 2019
- Design of a 1-MHz High-Efficiency High-Power-Density Bidirectional GaN-Based CLLC Converter for Electric VehiclesIEEE Transactions on Vehicular Technology, 2018
- Urban Rail Transit Power System Integrated with Electric Vehicles Based on CLLC Resonant and Buck-boost Converter2018
- Extended Harmonics Based Phase Tracking for Synchronous Rectification in CLLC ConvertersIEEE Transactions on Industrial Electronics, 2018
- A High-Efficiency High-Density Wide-Bandgap Device-Based Bidirectional On-Board ChargerIEEE Journal of Emerging and Selected Topics in Power Electronics, 2018
- Analysis of influence of losses in the core of the inductor on parameters of the buck converter2018
- Integrated Half-Bridge CLLC Bidirectional Converter for Energy Storage SystemsIEEE Transactions on Industrial Electronics, 2017
- 3.3kW CLLC converter with synchronous rectification for plug-in electric vehicles2017
- The Soft-Start Analysis of a Full-Bridge LLC Converter with Hybrid Control Strategy2016
- Modeling and simulation of power electronic convertersProceedings of the IEEE, 2001