Effect of additives on the melt rheology and thermal degradation of poly[(R)‐3‐hydroxybutyric acid]
Open Access
- 30 December 2014
- journal article
- research article
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 132 (15)
Abstract
Thermal degradation of poly[(R)−3‐hydroxybutyric acid] (PHB) during melt mixing results in random chain scission that produces shorter polymer chains containing crotonic and carboxyl end groups. One way of preventing this serious reduction of molar mass is to add agents that react with at least two of the newly generated end groups. Different types of commercially available additives known to react with carboxyl group, namely bis(3,4‐epoxycyclohexylmethyl) adipate (BECMA), 2,2'‐bis(2‐oxazoline) (BOX), trimethylolpropane tris(2‐methyl‐1‐aziridinepropionate) (PETAP), triphenyl phosphate (TPP), tris(nonylphenyl) phosphate (TNPP), polycarbodiimide (PCDI), and poly(methyl metharylate‐co‐glycidyl methacrylate) (GMA.MMA) were mixed with PHB by cocasting from solution in chloroform. Dynamic rheology as well as measurements of molar masses before and after dynamic analysis was used to evaluate the effect of the additives on the melt stability of PHB. Measurements of the dynamic shear modulus and the molar mass of molten PHB with the additives PCDI and GMA.MMA showed a minor improvement on the thermal stability. Furthermore, TPP and TNPP did not affect the thermal stability of PHB, whereas the presence of BECMA, BOX, and PETAP gave a strong decrease of the dynamic modulus compared with neat PHB. © 2014 The Authors Journal of Applied Polymer Science Published by Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015, 132, 41836.Keywords
Funding Information
- Swedish Research Council Formas (2009-2042)
This publication has 38 references indexed in Scilit:
- A convenient route to PHB macromonomers via anionically controlled moderate‐temperature degradation of PHBJournal of Polymer Science Part A: Polymer Chemistry, 2010
- Polyamide–polyester multiblock copolymers by chain‐coupling reactions of carboxy‐terminated polymers with phenylene and pyridylene bisoxazolinesJournal of Polymer Science Part A: Polymer Chemistry, 2005
- Melt reaction in blends of poly(3‐hydroxybutyrate) (PHB) and epoxidized natural rubber (ENR‐50)Journal of Applied Polymer Science, 2004
- Chain Extension of Carboxy‐Terminated Aliphatic Polyamides and Polyesters by Arylene and Pyridylene BisoxazolinesMacromolecular Chemistry and Physics, 2004
- Thermal stabilization of poly(3‐hydroxybutyrate) by poly(glycidyl methacrylate)Journal of Applied Polymer Science, 2002
- Viscoelasticity of biodegradable polymer blends of poly(3-hydroxybutyrate) and poly(ethylene oxide)Polymer, 2001
- Investigation on Model Molecules of the Reactions Induced by Triphenyl Phosphite Addition during Polyester ProcessingMacromolecules, 1996
- Thermal and infra-red spectroscopic investigations of a miscible blend composed of poly(vinyl phenol) and poly(hydroxybutyrate)Polymer, 1995
- Crystallization and thermal behaviour of poly (d(−) 3-hydroxybutyrate)/poly(epichlorohydrin) blendsPolymer, 1993
- High‐temperature reactions of hydroxyl and carboxyl PET chain end groups in the presence of aromatic phosphiteJournal of Polymer Science Part A: Polymer Chemistry, 1986