Frans H. J. Maurer
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Frans H. J. Maurer has a total of 11 co-authors. Here are the top co-authors by number of shared publications:
Anna Andersson
Department of Polymer & Materials Chemistry, Lund University P.O. Box 124, S-22100 Lund, Sweden
4 shared publicationsStefan Lundmark
Department of Polymer & Materials Chemistry, Lund University P.O. Box 124, S-22100 Lund, Sweden, Perstorp AB, R&D, S-284 80 Perstorp, Sweden
4 shared publicationsAnders Magnusson
Perstorp AB, R&D, S-284 80 Perstorp, Sweden
3 shared publicationsAlan Werker
AnoxKaldnes AB SE‐22647 Lund Sweden
1 shared publicationCarlos R. Arza
Department of Chemistry Polymer & Materials Chemistry, Lund University SE‐22100 Lund Sweden
1 shared publicationJunhua Zhang
Beijing National Laboratory for Molecular Sciences, Key Laboratory of Engineering Plastics, Institute of Chemistry, Chinese Academy of Sciences, Beijing 100190, China
1 shared publication
Latest Publications
- Open Access
- 30 December 2014
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 132 (15)
Effect of additives on the melt rheology and thermal degradation of poly[(R)‐3‐hydroxybutyric acid]
Thermal degradation of poly[(R)−3‐hydroxybutyric acid] (PHB) during melt mixing results in random chain scission that produces shorter polymer chains containing crotonic and carboxyl end groups. One way of preventing this serious reduction of molar mass is to add agents that react with at least two of the newly generated end groups. Different types of commercially available additives known to react with carboxyl group, namely bis(3,4‐epoxycyclohexylmethyl) adipate (BECMA), 2,2'‐bis(2‐oxazoline) (BOX), trimethylolpropane tris(2‐methyl‐1‐aziridinepropionate) (PETAP), triphenyl phosphate (TPP), tris(nonylphenyl) phosphate (TNPP), polycarbodiimide (PCDI), and poly(methyl metharylate‐co‐glycidyl methacrylate) (GMA.MMA) were mixed with PHB by cocasting from solution in chloroform. Dynamic rheology as well as measurements of molar masses before and after dynamic analysis was used to evaluate the effect of the additives on the melt stability of PHB. Measurements of the dynamic shear modulus and the molar mass of molten PHB with the additives PCDI and GMA.MMA showed a minor improvement on the thermal stability. Furthermore, TPP and TNPP did not affect the thermal stability of PHB, whereas the presence of BECMA, BOX, and PETAP gave a strong decrease of the dynamic modulus compared with neat PHB. © 2014 The Authors Journal of Applied Polymer Science Published by Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015, 132, 41836.
- 30 December 2014
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 132 (15)
Open AccessEffect of additives on the melt rheology and thermal degradation of poly[(R)‐3‐hydroxybutyric acid]
Thermal degradation of poly[(R)−3‐hydroxybutyric acid] (PHB) during melt mixing results in random chain scission that produces shorter polymer chains containing crotonic and carboxyl end groups. One way of preventing this serious reduction of molar mass is to add agents that react with at least two of the newly generated end groups. Different types of commercially available additives known to react with carboxyl group, namely bis(3,4‐epoxycyclohexylmethyl) adipate (BECMA), 2,2'‐bis(2‐oxazoline) (BOX), trimethylolpropane tris(2‐methyl‐1‐aziridinepropionate) (PETAP), triphenyl phosphate (TPP), tris(nonylphenyl) phosphate (TNPP), polycarbodiimide (PCDI), and poly(methyl metharylate‐co‐glycidyl methacrylate) (GMA.MMA) were mixed with PHB by cocasting from solution in chloroform. Dynamic rheology as well as measurements of molar masses before and after dynamic analysis was used to evaluate the effect of the additives on the melt stability of PHB. Measurements of the dynamic shear modulus and the molar mass of molten PHB with the additives PCDI and GMA.MMA showed a minor improvement on the thermal stability. Furthermore, TPP and TNPP did not affect the thermal stability of PHB, whereas the presence of BECMA, BOX, and PETAP gave a strong decrease of the dynamic modulus compared with neat PHB. © 2014 The Authors Journal of Applied Polymer Science Published by Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015, 132, 41836.
- 11 May 2011
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry C
- Vol. 115 (21) , 10431-10441
In situ Formation of TiO2 in Electrospun Poly(methyl methacrylate) Nanohybrids
- 11 May 2011
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry C
- Vol. 115 (21) , 10431-10441
In situ Formation of TiO2 in Electrospun Poly(methyl methacrylate) Nanohybrids
- 27 November 2009
- Published by SAGE Publications in Journal of Cellular Plastics
- Vol. 46 (1) , 73-93
Vibration and Acoustic Damping of Flexible Polyurethane Foams Modified with a Hyperbranched Polymer
The dynamic mechanical properties and acoustic damping of polyurethane (PU) foams loaded with a hyperbranched polymer (HBP) have been studied. The results show a significant modulus enhancement parallel to an increased vibration damping in the low frequency range of ~1 Hz with increased amount of HBP. Furthermore, an increased acoustic damping in the frequency interval of 500—1600 Hz is observed with increasing amount of HBP. The origin of these property enhancements are sought in the morphology and the chemical composition of the PU foam. It has been found that no visible differences in cell sizes and strut thicknesses exist among the foams. However, FTIR reveals significant differences in chemical composition between the foams of different HBP content, indicating increased crosslinking.
- 27 November 2009
- Published by SAGE Publications in Journal of Cellular Plastics
- Vol. 46 (1) , 73-93
Vibration and Acoustic Damping of Flexible Polyurethane Foams Modified with a Hyperbranched Polymer
The dynamic mechanical properties and acoustic damping of polyurethane (PU) foams loaded with a hyperbranched polymer (HBP) have been studied. The results show a significant modulus enhancement parallel to an increased vibration damping in the low frequency range of ~1 Hz with increased amount of HBP. Furthermore, an increased acoustic damping in the frequency interval of 500—1600 Hz is observed with increasing amount of HBP. The origin of these property enhancements are sought in the morphology and the chemical composition of the PU foam. It has been found that no visible differences in cell sizes and strut thicknesses exist among the foams. However, FTIR reveals significant differences in chemical composition between the foams of different HBP content, indicating increased crosslinking.
- 18 November 2008
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 111 (5) , 2290-2298
Shear behavior of flexible polyurethane foams under uniaxial compression
The mechanisms behind the load building capabilities of a hyperbranched polymer (HBP) in polyurethane (PU) foams have been investigated, using microscopy techniques and mechanical analyses. By broadening the traditional uniaxial compression characterization of PU foams to include combined shear deformations and compression behavior, an apparent Poisson ratio of the foam could be obtained in situ. The Poisson ratio as function of uniaxial compression ratio of the foam was thus studied for foams filled with Styrene Acrylonitrile (SAN) and foams containing HBP. Generally a window of deformation ratios could be defined in which the Poisson ratio was negative. The width of this window varied systematically with the SAN loading, where an increase in SAN particle loading resulted in a broadening of the negative Poisson ratio window. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2009
- 18 November 2008
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 111 (5) , 2290-2298
Shear behavior of flexible polyurethane foams under uniaxial compression
The mechanisms behind the load building capabilities of a hyperbranched polymer (HBP) in polyurethane (PU) foams have been investigated, using microscopy techniques and mechanical analyses. By broadening the traditional uniaxial compression characterization of PU foams to include combined shear deformations and compression behavior, an apparent Poisson ratio of the foam could be obtained in situ. The Poisson ratio as function of uniaxial compression ratio of the foam was thus studied for foams filled with Styrene Acrylonitrile (SAN) and foams containing HBP. Generally a window of deformation ratios could be defined in which the Poisson ratio was negative. The width of this window varied systematically with the SAN loading, where an increase in SAN particle loading resulted in a broadening of the negative Poisson ratio window. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2009
- 2 May 2008
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 109 (4) , 2269-2274
Intumescent foams—A novel flame retardant system for flexible polyurethane foams
A combination of intumescent components was evaluated as a novel flame retardant system in a flexible polyurethane foam, and the incorporation of these components gave rise to a significant enhancement of the flame retardant properties of the foam. The heat release rate was lowered at an early stage as well as throughout the fire, the total heat production was decreased and the time to ignition was prolonged. Mechanical measurements of the foam revealed enhanced properties in terms of stiffness accompanied by a large decrease in elongation at break as compared with a reference foam. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008
- 2 May 2008
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 109 (4) , 2269-2274
Intumescent foams—A novel flame retardant system for flexible polyurethane foams
A combination of intumescent components was evaluated as a novel flame retardant system in a flexible polyurethane foam, and the incorporation of these components gave rise to a significant enhancement of the flame retardant properties of the foam. The heat release rate was lowered at an early stage as well as throughout the fire, the total heat production was decreased and the time to ignition was prolonged. Mechanical measurements of the foam revealed enhanced properties in terms of stiffness accompanied by a large decrease in elongation at break as compared with a reference foam. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008
- 26 January 2007
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 104 (2) , 748-753
Evaluation and characterization of ammoniumpolyphosphate–pentaerythritol‐based systems for intumescent coatings
Intumescent coatings are increasingly used as a method of passive fire protection on steel constructions. By forming a carbon network and releasing a blowing agent, the thin intumescent film swells 100‐fold at elevated temperatures. The highly insulating foam effectively prevents the load bearing steel from reaching its critical temperature at which it looses its mechanical properties and collapses. The role of the carbon donor in intumescent coatings has been studied. Comparison in temperature development, foaming ratios, and rheological behavior has been performed between formulations containing pentaerythritol (penta), di–penta, and tri–penta. A simulated fire test, in which the temperature development during intumescence was studied, showed that the formulations containing penta were considerably more efficient in keeping a low temperature throughout the process. A more rapid temperature development was displayed when using di–penta and tri–penta as the carbon donor. Rheometer tests indicate that penta formulations enter the intumescent process at a lower temperature and stays in it for a longer time than di–penta and tri–penta formulations. Furthermore, the crossover temperature and maximum phase angle are shifted towards higher temperatures by replacing penta with di–penta and with tri–penta in the formulations, respectively. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 748–753, 2007
- 26 January 2007
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 104 (2) , 748-753
Evaluation and characterization of ammoniumpolyphosphate–pentaerythritol‐based systems for intumescent coatings
Intumescent coatings are increasingly used as a method of passive fire protection on steel constructions. By forming a carbon network and releasing a blowing agent, the thin intumescent film swells 100‐fold at elevated temperatures. The highly insulating foam effectively prevents the load bearing steel from reaching its critical temperature at which it looses its mechanical properties and collapses. The role of the carbon donor in intumescent coatings has been studied. Comparison in temperature development, foaming ratios, and rheological behavior has been performed between formulations containing pentaerythritol (penta), di–penta, and tri–penta. A simulated fire test, in which the temperature development during intumescence was studied, showed that the formulations containing penta were considerably more efficient in keeping a low temperature throughout the process. A more rapid temperature development was displayed when using di–penta and tri–penta as the carbon donor. Rheometer tests indicate that penta formulations enter the intumescent process at a lower temperature and stays in it for a longer time than di–penta and tri–penta formulations. Furthermore, the crossover temperature and maximum phase angle are shifted towards higher temperatures by replacing penta with di–penta and with tri–penta in the formulations, respectively. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 748–753, 2007