Low-Cyclic Reversed Loading Tests on Full-Scale Precast Concrete Composite Wall Connected by Tooth Groove and Grouted Sleeve
Open Access
Abstract
In this paper, a novel precast concrete composite wall connected by tooth groove and grouted sleeve was introduced, which is produced in factories by means of structure-insulation integrated prefabrication, and the prefabrication and assembly process were presented minutely. To verify the feasibility and reliability of this novel tooth groove and grouted sleeve connection method and explore the joint connection performance and the seismic performance of the precast concrete composite wall connected by tooth groove and grouted sleeve, low-cyclic reversed loading tests with an axial compressive ratio of 0.1 were performed on two full-scale precast concrete composite walls. Moreover, the failure mode, hysteretic curve, skeleton curve, stiffness degradation, displacement ductility, energy dissipation capacity, and reinforcement strain were comprehensively discussed. The research results showed that under the vertical axial load and low-cyclic reversed load, the distributed reinforcements in the wall panel only played a structural role, while the connecting reinforcements at horizontal joints can always effectively transfer stress without bond failure, and the tooth groove and grouted sleeve connection performance was reliable. In addition, the hysteretic curves of the precast concrete composite wall connected by tooth groove and grouted sleeve were full, showing good ductile deformation capacity and energy dissipation capacity. In general, the precast concrete composite wall connected by tooth groove and grouted sleeve not only possessed favorable seismic performance but also showed obvious advantages such as green energy saving, high assembly rate, and less on-site wet operation, which can be applied to practical engineering under reasonable design.Keywords
Funding Information
- National Natural Science Foundation of China (52178179, 2023SK2014, 2023ZZTS0372)
- Hunan Science and Technology Plan Project (52178179, 2023SK2014, 2023ZZTS0372)
- Fundamental Research Funds for Central Universities of the Central South University (52178179, 2023SK2014, 2023ZZTS0372)
This publication has 50 references indexed in Scilit:
- A new precast wall connection subjected to monotonic loadingComputers & concrete, 2016
- In-plane shear behavior of insulated precast concrete sandwich panels reinforced with corrugated GFRP shear connectorsComposites Part B: Engineering, 2015
- Seismic performance of steel–concrete composite structural walls with internal bracingsJournal of Constructional Steel Research, 2015
- Novel anchor-jointed precast shear wall: testing and validationProceedings of the Institution of Civil Engineers - Structures and Buildings, 2015
- Experimental Evaluation of Seismic Performance of Squat RC Structural Walls with Limited Ductility Reinforcing DetailsJournal of Earthquake Engineering, 2014
- Definitions, concepts and new directions in Industrialized Building Systems (IBS)KSCE Journal of Civil Engineering, 2013
- Investigation of Seismic Behavior and Infill Wall Effects for Prefabricated Industrial Buildings in TurkeyJournal of Performance of Constructed Facilities, 2011
- Nano-structured sandwich composites response to low-velocity impactComposite Structures, 2010
- Experimental study of bonded steel concrete composite structuresJournal of Constructional Steel Research, 2007
- Experimental investigation and design of sandwich panels subject to local buckling effectsJournal of Constructional Steel Research, 2003