Research on Mechanical Properties and Crack Evolution of Basalt Fiber-Reinforced Coal Gangue–Slag Geopolymer Concrete Based on Digital Image Correlation
Open Access
Abstract
To investigate the influence of basalt fiber (BF) on the mechanical properties and crack evolution of coal gangue–slag geopolymer concrete, geopolymer concrete specimens were prepared using coal gangue powder calcined at 700 °C and slag as precursors, with BF contents ranging from 0 to 1.25%. Mechanical testing combined with digital image correlation (DIC), scanning electron microscopy (SEM), and X-ray diffraction (XRD) was conducted to evaluate the effects of BF on macroscopic mechanical behavior, crack evolution, and underlying microstructural mechanisms. The results demonstrate that BF effectively enhances both the mechanical performance and crack-control capacity of coal gangue–slag geopolymer concrete, exhibiting a clear content-dependent trend. Compressive strength initially increases and subsequently decreases with increasing BF content. The 28-day compressive strength reaches a maximum value of 84.05 MPa at a BF content of 0.5%, representing an 11.92% improvement compared with the control group. Splitting tensile strength and flexural strength attain their peak values at a BF content of 1%, increasing by 37.88% and 25.81%, respectively. DIC analysis indicates that BF delays strain localization and effectively restrains the propagation of dominant cracks. Specifically, the compressive strain field becomes more uniformly distributed at 0.5% BF content, while crack propagation during splitting failure is more stable at 1% BF content. SEM observations reveal that the primary strengthening mechanisms include crack bridging, interfacial load transfer, and energy dissipation associated with fiber pull-out. XRD analysis shows that BF incorporation does not significantly alter the phase composition of the coal gangue–slag geopolymer system; thus, performance enhancement mainly arises from fiber bridging and interfacial reinforcement rather than changes in primary reaction products.Keywords
Funding Information
- China Institute of Water Resources and Hydropower Research (EMF202408)
- Scientific Expedition Project of the Ministry of Science and Technology (2022xjkk010601)
This publication has 46 references indexed in Scilit:
- Mechanical properties and durability of fiber reinforced geopolymer composites: A review on recent progressEngineering Reports, 2023
- Research on the fracture mechanical performance of basalt fiber nano-CaCO3 concrete based on DIC technologyConstruction and Building Materials, 2022
- Effect of basalt fiber on metakaolin-based geopolymer mortars containing rilem, basalt and recycled waste concrete aggregatesConstruction and Building Materials, 2021
- Eco-efficient cements: Potential economically viable solutions for a low-CO2 cement-based materials industryCement and Concrete Research, 2018
- Mechanical and flexural performance of synthetic fibre reinforced geopolymer concreteConstruction and Building Materials, 2018
- An investigation into fracture behavior of geopolymer concrete with digital image correlation techniqueConstruction and Building Materials, 2017
- A review of alternative approaches to the reduction of CO2 emissions associated with the manufacture of the binder phase in concreteCement and Concrete Research, 2015
- An overview on concrete carbonation in the context of eco-efficient construction: Evaluation, use of SCMs and/or RACConstruction and Building Materials, 2012
- Geopolymer technology: the current state of the artJournal of Materials Science, 2006
- GeopolymersJournal of Thermal Analysis and Calorimetry, 1991