SBS Mitigation by Manipulating the Injecting Polarization Direction in a High-Power Monolithic PM Amplifier
Open Access
Abstract
The polarization direction-dependent SBS threshold was investigated, and the terminal polarization control technique was demonstrated to restore the linear polarization state. By increasing the relative angle of the injecting polarization direction from 0° to 90°, the measured SBS threshold increased until reaching a maximum value, beyond which it decreased in a nearly symmetrical trend. The highest SBS threshold was achieved with the relative polarization angle being 45°, delivering a 67% threshold enhancement compared with that at 0°. A quarter-wave-plate was used to restore the polarization state of the output laser manually from an elliptic to a linearly polarized state, and temperature-dependent polarization fluctuation was observed, which intensified as the laser power was scaled. By reducing the cooling temperature, a 1 kW laser with a linearly polarized state was demonstrated using a 45° polarization direction-injected monolithic PM amplifier.Keywords
Funding Information
- National Natural Science Foundation of China (62205317)
This publication has 38 references indexed in Scilit:
- Stimulated Brillouin scattering induced mode degradation in high-power narrow-linewidth linearly polarized fiber amplifiersOptics & Laser Technology, 2023
- Kilowatt-level, mode-instability-free, all-fiber and polarization-maintained amplifier with spectral linewidth of 1.8 GHzLaser Physics, 2019
- Theoretical study of pump power distribution on modal instabilities in high power fiber amplifiersLaser Physics Letters, 2016
- High-power fibre lasersNature Photonics, 2013
- 100-mW linear polarization single-frequency all-fiber seed laser for coherent Doppler lidar applicationOptics Communications, 2012
- SBS threshold of a fiber with a Brillouin frequency shift distributionJournal of Lightwave Technology, 1996
- Suppression of stimulated Brillouin scattering ina fibre bychanging the core radiusElectronics Letters, 1995
- Dependence of stimulated Brillouin scattering on temperature distribution in polarization-maintaining fibersIEEE Photonics Technology Letters, 1993
- Stimulated Brillouin scattering suppression by means of applying strain distribution to fiber with cablingJournal of Lightwave Technology, 1993
- Stimulated Brillouin scattering in optical fibersApplied Physics Letters, 1972