Jianjun Wang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Jianjun Wang has a total of 55 co-authors. Here are the top co-authors by number of shared publications:
- Rumao Tao
China Academy of Engineering Physics
6 shared publications - Honghuan Lin
Laser Fusion Research Center, Chinese Academy of Engineering Physics, Mianyang 621900, China
5 shared publications - Chun Zhang
Laser Fusion Research Center, China Academy of Engineering Physics
3 shared publications - Qiang Shu
Laser Fusion Research Center, Chinese Academy of Engineering Physics, Mianyang 621900, China
3 shared publications - Chenxu Liu
Chinese Academy of Engineering Physics
2 shared publications - Fang Li
Laser Fusion Research Center, Chinese Academy of Engineering Physics, Mianyang 621900, China
2 shared publications
Latest Publications
- Open Access
A 6 kW Level Linearly Polarized Near-Diffraction-Limited Monolithic Fiber Laser with a 0.43 nm Linewidth
A high-power, narrow-linewidth, all-fiber polarization-maintaining (PM) amplifier has been demonstrated. A lasing power of 5870 W has been delivered in master oscillator power amplifier architecture with cascaded white noise source (WNS) phase modulation and bidirectional pumping schemes. The maximal power was limited by the onset of stimulated Brillouin scattering. At the maximum power operation, the amplifier exhibited a 3 dB spectral linewidth of 0.43 nm with beam quality being M2 < 1.33 and polarization extinction ratio (PER) being 16.3 dB. To the best of our knowledge, this represents the highest spectral brightness and PER achieved by PM fiber laser systems around 6 kW-level operation.
Open AccessA 6 kW Level Linearly Polarized Near-Diffraction-Limited Monolithic Fiber Laser with a 0.43 nm Linewidth
A high-power, narrow-linewidth, all-fiber polarization-maintaining (PM) amplifier has been demonstrated. A lasing power of 5870 W has been delivered in master oscillator power amplifier architecture with cascaded white noise source (WNS) phase modulation and bidirectional pumping schemes. The maximal power was limited by the onset of stimulated Brillouin scattering. At the maximum power operation, the amplifier exhibited a 3 dB spectral linewidth of 0.43 nm with beam quality being M2 < 1.33 and polarization extinction ratio (PER) being 16.3 dB. To the best of our knowledge, this represents the highest spectral brightness and PER achieved by PM fiber laser systems around 6 kW-level operation.
- Open Access
- 18 June 2025
- Published by MDPI AG in Preprints.org
6 kW-Level Linearly Polarized Near-Diffraction-Limited Monolithic Fiber Laser with Linewidth Being 0.43nm
A high power narrow-linewidth, all-fiber polarization-maintaining (PM) amplifier has been demonstrated. A lasing power of 5870W has been delivered in master oscillator power amplifier architecture with cascaded white noise source (WNS) phase modulation and bidirectional pumping schemes. The maximal power was limited by the onset of Stimulated Brillouin scattering. At the maximum power operation, the amplifier exhibited a 3dB spectral linewidth of 0.43nm with beam quality be M² < 1.3 and polarization extinction ratio (PER) being 16.3dB. To the best of our knowledge, this represents the highest spectral brightness and PER achieved by PM fiber laser systems around 6kW-level operation.
- 18 June 2025
- Published by MDPI AG in Preprints.org
Open Access6 kW-Level Linearly Polarized Near-Diffraction-Limited Monolithic Fiber Laser with Linewidth Being 0.43nm
A high power narrow-linewidth, all-fiber polarization-maintaining (PM) amplifier has been demonstrated. A lasing power of 5870W has been delivered in master oscillator power amplifier architecture with cascaded white noise source (WNS) phase modulation and bidirectional pumping schemes. The maximal power was limited by the onset of Stimulated Brillouin scattering. At the maximum power operation, the amplifier exhibited a 3dB spectral linewidth of 0.43nm with beam quality be M² < 1.3 and polarization extinction ratio (PER) being 16.3dB. To the best of our knowledge, this represents the highest spectral brightness and PER achieved by PM fiber laser systems around 6kW-level operation.
- Open Access
Four-Channel Nanosecond Pulse Combination in the Non-Polarization-Maintaining Fiber System
We report a novel coherent nanosecond pulse combination approach using four-channel non-polarization-maintaining large-mode-area (LMA) Ytterbium-doped (Yb-doped) fiber amplifiers. The stochastic parallel gradient descent (SPGD) and frequency dithering algorithm are introduced to stabilize the synchronization in polarizations and phases among all the channels. The system delivers an average power of ~250 W and a pulse duration of 4 ns with a combination efficiency of around 87% when the repetition rate of a single pulse is limited to 1 MHz, the polarization extinction ratio (PER) at 30 μm core diameter and 250 μm cladding diameter remains around 96%.
Open AccessFour-Channel Nanosecond Pulse Combination in the Non-Polarization-Maintaining Fiber System
We report a novel coherent nanosecond pulse combination approach using four-channel non-polarization-maintaining large-mode-area (LMA) Ytterbium-doped (Yb-doped) fiber amplifiers. The stochastic parallel gradient descent (SPGD) and frequency dithering algorithm are introduced to stabilize the synchronization in polarizations and phases among all the channels. The system delivers an average power of ~250 W and a pulse duration of 4 ns with a combination efficiency of around 87% when the repetition rate of a single pulse is limited to 1 MHz, the polarization extinction ratio (PER) at 30 μm core diameter and 250 μm cladding diameter remains around 96%.
- Open Access
SBS Mitigation by Manipulating the Injecting Polarization Direction in a High-Power Monolithic PM Amplifier
The polarization direction-dependent SBS threshold was investigated, and the terminal polarization control technique was demonstrated to restore the linear polarization state. By increasing the relative angle of the injecting polarization direction from 0° to 90°, the measured SBS threshold increased until reaching a maximum value, beyond which it decreased in a nearly symmetrical trend. The highest SBS threshold was achieved with the relative polarization angle being 45°, delivering a 67% threshold enhancement compared with that at 0°. A quarter-wave-plate was used to restore the polarization state of the output laser manually from an elliptic to a linearly polarized state, and temperature-dependent polarization fluctuation was observed, which intensified as the laser power was scaled. By reducing the cooling temperature, a 1 kW laser with a linearly polarized state was demonstrated using a 45° polarization direction-injected monolithic PM amplifier.
Open AccessSBS Mitigation by Manipulating the Injecting Polarization Direction in a High-Power Monolithic PM Amplifier
The polarization direction-dependent SBS threshold was investigated, and the terminal polarization control technique was demonstrated to restore the linear polarization state. By increasing the relative angle of the injecting polarization direction from 0° to 90°, the measured SBS threshold increased until reaching a maximum value, beyond which it decreased in a nearly symmetrical trend. The highest SBS threshold was achieved with the relative polarization angle being 45°, delivering a 67% threshold enhancement compared with that at 0°. A quarter-wave-plate was used to restore the polarization state of the output laser manually from an elliptic to a linearly polarized state, and temperature-dependent polarization fluctuation was observed, which intensified as the laser power was scaled. By reducing the cooling temperature, a 1 kW laser with a linearly polarized state was demonstrated using a 45° polarization direction-injected monolithic PM amplifier.
- Open Access
- 20 January 2023
- Published by MDPI AG in Micromachines
- Vol. 14 (2) , 264
A 3.7-kW Oscillating-Amplifying Integrated Fiber Laser Featuring a Compact Oval-Shaped Cylinder Package
Combining the advantages of high efficiency, environmental robustness, and anti-reflection behavior, oscillating-amplifying integrated fiber lasers have become popular for use in high-power laser structures in industrial applications, wherein the size of the laser source matters. Here, an oscillating-amplifying integrated fiber laser in an oval-shaped cylinder package has been proposed and demonstrated, the footprint for which only occupies an area of 0.024 m2 apart from the pump diode, which is much smaller than in traditional planar fiber laser packages. Numerical simulations have been carried out, which have revealed that an oval-shaped cylinder package can effectively suppress the high-order mode in large mode area fiber setups and thereby benefit the integration of fusion points and the unpackaged elements at the same time. Over 3.7 kW of transverse mode instability (TMI)-free output power has been obtained, with a slope efficiency higher than 80%. With a custom-made chirped and tilted fiber Bragg grating (CTFBG), the Raman suppression ratio is improved to reach 38 dB at peak output power. The oval-shaped design has been verified to assist with the realization of TMI suppression and improve the integration of high-power fiber lasers. To the best of our knowledge, this fiber laser has among the smallest footprints of the various fiber sources at such high-power operating levels.
- 20 January 2023
- Published by MDPI AG in Micromachines
- Vol. 14 (2) , 264
Open AccessA 3.7-kW Oscillating-Amplifying Integrated Fiber Laser Featuring a Compact Oval-Shaped Cylinder Package
Combining the advantages of high efficiency, environmental robustness, and anti-reflection behavior, oscillating-amplifying integrated fiber lasers have become popular for use in high-power laser structures in industrial applications, wherein the size of the laser source matters. Here, an oscillating-amplifying integrated fiber laser in an oval-shaped cylinder package has been proposed and demonstrated, the footprint for which only occupies an area of 0.024 m2 apart from the pump diode, which is much smaller than in traditional planar fiber laser packages. Numerical simulations have been carried out, which have revealed that an oval-shaped cylinder package can effectively suppress the high-order mode in large mode area fiber setups and thereby benefit the integration of fusion points and the unpackaged elements at the same time. Over 3.7 kW of transverse mode instability (TMI)-free output power has been obtained, with a slope efficiency higher than 80%. With a custom-made chirped and tilted fiber Bragg grating (CTFBG), the Raman suppression ratio is improved to reach 38 dB at peak output power. The oval-shaped design has been verified to assist with the realization of TMI suppression and improve the integration of high-power fiber lasers. To the best of our knowledge, this fiber laser has among the smallest footprints of the various fiber sources at such high-power operating levels.
- Open Access
- 8 February 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Photonics Journal
- Vol. 14 (2) , 1-5
SRS-Induced Spatial-Spectral Distortion and Its Mitigation Strategy in High-Power Fiber Amplifiers
The spatial-spectral evolution properties of laser beam in the presence of stimulated Raman scattering (SRS) effect have been studied in large mode area (LMA) fiber. With the employment of long/short pass filters, spatial evolution of the signal and Raman light has been studied individually. After the onset of SRS, the simultaneous optimizing of signal light and degrading of Raman light was observed, which has been attributed to the SRS effect of multimode laser beams in LMA fiber. The spectral evolution characteristics indicated that the SRS effect in LMA fiber will trigger other nonlinear effects, mainly inter-modal four-wave-mixing effect and cross-phase-modulation induced modulation instability. Furthermore, the impacts of bending strategy and multimode LMA fiber on SRS-induced spatial-spectral distortion have also been studied, which shows that the SRS-induced mode distortion can be suppressed by increasing the fiber size while the bending strategy plays a limited role.
- 8 February 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Photonics Journal
- Vol. 14 (2) , 1-5
Open AccessSRS-Induced Spatial-Spectral Distortion and Its Mitigation Strategy in High-Power Fiber Amplifiers
The spatial-spectral evolution properties of laser beam in the presence of stimulated Raman scattering (SRS) effect have been studied in large mode area (LMA) fiber. With the employment of long/short pass filters, spatial evolution of the signal and Raman light has been studied individually. After the onset of SRS, the simultaneous optimizing of signal light and degrading of Raman light was observed, which has been attributed to the SRS effect of multimode laser beams in LMA fiber. The spectral evolution characteristics indicated that the SRS effect in LMA fiber will trigger other nonlinear effects, mainly inter-modal four-wave-mixing effect and cross-phase-modulation induced modulation instability. Furthermore, the impacts of bending strategy and multimode LMA fiber on SRS-induced spatial-spectral distortion have also been studied, which shows that the SRS-induced mode distortion can be suppressed by increasing the fiber size while the bending strategy plays a limited role.
- 17 March 2011
- Published by Optica Publishing Group in Optics Letters
- Vol. 36 (7) , 1053-1055
Intermodal interference induced significant frequency modulation to amplitude modulation conversion in a broadband large-mode-area fiber laser
The conversion of the FM-to-AM effect induced by intermodal interference in the broadband large-mode-area (LMA) fiber laser was first investigated theoretically and experimentally. The numerical simulation results show that the spectrum transfer functions are different at different positions of the LMA fiber end face owing to the intermodal interference, so the output broadband pulses are different. We attain the similar results in the experiment when measuring the output pulse with the single mode fiber sampling oscilloscope. Whereas there is no amplitude modulation for the output pulse when measured by the bulk detector owing to the orthogonal characteristic of the eigenmodes.
- 17 March 2011
- Published by Optica Publishing Group in Optics Letters
- Vol. 36 (7) , 1053-1055
Intermodal interference induced significant frequency modulation to amplitude modulation conversion in a broadband large-mode-area fiber laser
The conversion of the FM-to-AM effect induced by intermodal interference in the broadband large-mode-area (LMA) fiber laser was first investigated theoretically and experimentally. The numerical simulation results show that the spectrum transfer functions are different at different positions of the LMA fiber end face owing to the intermodal interference, so the output broadband pulses are different. We attain the similar results in the experiment when measuring the output pulse with the single mode fiber sampling oscilloscope. Whereas there is no amplitude modulation for the output pulse when measured by the bulk detector owing to the orthogonal characteristic of the eigenmodes.
- 15 March 2010
- Published by Optica Publishing Group in Optics Express
- Vol. 18 (7) , 6621-6627
Weak etalon effect in wave plates can introduce significant FM-to-AM modulations in complex laser systems
The conversion of frequency modulation to amplitude modulation (FM-to-AM) effect is harmful to the high power laser facility based on the phase modulation technique. The FM-to-AM effect of phase modulation pulse induced by the weak etalon effect in wave plates was investigated theoretically and experimentally. A bulk phase modulator with a modulation frequency of 9.2GHz was employed. The numerical simulation results show that the FM-to-AM effect with a temporal modulation depth of 2.5% and 29.7% on the top of the pulse shape was induced by the weak etalon effect in half-wave plate with thickness of 1mm and residual reflectance ratio of 0.5% for 1 pass and 12 passes respectively. On the same condition, the temporal modulation depth is 3.0% and 23.4% respectively in the experiment. The results are in good agreement with numerical simulation results. To our knowledge, it is the first time to introduce the weak etalon effect in wave plates for a complex phase modulation laser system.
- 15 March 2010
- Published by Optica Publishing Group in Optics Express
- Vol. 18 (7) , 6621-6627
Weak etalon effect in wave plates can introduce significant FM-to-AM modulations in complex laser systems
The conversion of frequency modulation to amplitude modulation (FM-to-AM) effect is harmful to the high power laser facility based on the phase modulation technique. The FM-to-AM effect of phase modulation pulse induced by the weak etalon effect in wave plates was investigated theoretically and experimentally. A bulk phase modulator with a modulation frequency of 9.2GHz was employed. The numerical simulation results show that the FM-to-AM effect with a temporal modulation depth of 2.5% and 29.7% on the top of the pulse shape was induced by the weak etalon effect in half-wave plate with thickness of 1mm and residual reflectance ratio of 0.5% for 1 pass and 12 passes respectively. On the same condition, the temporal modulation depth is 3.0% and 23.4% respectively in the experiment. The results are in good agreement with numerical simulation results. To our knowledge, it is the first time to introduce the weak etalon effect in wave plates for a complex phase modulation laser system.