Design, Fabrication, and Testing of a Novel Design for Flexible Light-Emitting Diode Signage Modules
- 19 February 2021
- journal article
- research article
- Published by ASME International in Journal of Electronic Packaging
- Vol. 143 (3)
Abstract
This paper presents a new design architecture for mechanically flexible light-emitting diode (LED) signage modules for applications in digital advertising on curved surfaces. The new design comprises an array of commonly used rigid printed circuit boards (PCBs) but of smaller size with some spacing between them, which is encapsulated by a flexible substrate or potting material, instead of a large single rigid PCB in the entire LED module as in the case of conventional LED signage modules. Commonly used through-hole type red-green-blue (RGB) LEDs are considered. To demonstrate the design, manufacturing, and mechanical flexibility of the design, a prototype LED signage module with a typical industry standard size of 304 mm × 304 mm × 10 mm was designed and fabricated. Experimental testing and finite element simulations were conducted to analyze mechanical flexibility and internal stresses in the module. The results demonstrate that the new design provides flexible LED modules, without altering the conventional LED control system. It is shown that maximum stress occurs in the spacing between the PCBs and is small even for large module deflection. As the curvature of module deflection was decreased, the maximum stress increased, indicating an important design parameter for the module deflection. The proposed design architecture will enable both indoor and outdoor digital advertising using billboards on a wide range of curved surfaces.Keywords
This publication has 19 references indexed in Scilit:
- Effective Mitigation of Shock Loads in Embedded Electronic Packaging Using Bilayered Potting MaterialsJournal of Electronic Packaging, 2014
- Audience Measurement of Digital Signage: Quantitative Study in Real-World Environment Using Computer VisionInteracting with Computers, 2013
- The Use of Potting Materials for Electronic-Packaging Survivability in Smart MunitionsJournal of Electronic Packaging, 2011
- Various approaches to a human preference analysis in a digital signage display designHuman Factors and Ergonomics in Manufacturing & Service Industries, 2011
- The mediating effects of perception and emotion: Digital signage in mall atmosphericsJournal of Retailing and Consumer Services, 2010
- Thermal analysis and optimization of multiple LED packaging based on a general analytical solutionInternational Journal of Thermal Sciences, 2010
- Measurement of the Poisson’s ratio of flexible polyurethane foam and its influence on a uniaxial compression modelInternational Journal of Engineering Science, 2008
- Shock pulse attenuation in a nonlinear viscoelastic solidJournal of the Mechanics and Physics of Solids, 1973
- Large deformation isotropic elasticity – on the correlation of theory and experiment for incompressible rubberlike solidsProceedings of the Royal Society of London. A. Mathematical and Physical Sciences, 1972
- A Study of the Cantilevered Square Plate Subjected to a Uniform LoadingJournal of the Aerospace Sciences, 1962