High-Temperature Sensing with Iron-Ceramic Enhanced Fiber Bragg Grating Sensors: Encapsulation Strategies and Concentration Dependencies
Open Access
- 24 October 2024
- journal article
- Published by BON VIEW PUBLISHING PTE in Journal of Optics and Photonics Research
- Vol. 3 (2) , 131-139
Abstract
This research article primarily aims to enable type-I fiber Bragg grating (FBG) for high-temperature sensing and to explore the influence of varying concentrations of iron fillings in the ceramic on the sensor's sensitivity and response time. A set of six identical probes were fabricated, each with a different iron filling concentration ranging from 0% to 50%. Increasing the iron filling concentration from 0% to 50% enhanced the temperature sensitivity of the probe from 14.08 ± 0.24 pm/°C to 14.67 ± 0.17 pm/°C. To evaluate the response time, the probes were subjected to an abrupt heating process from 27 °C to 700 °C, and the duration was measured. The response time improved from 270 s to 180 s, representing a 33.33% improvement, as the iron filling concentration increased from 0% to 50%. Beyond a 40% concentration, both the temperature sensitivity and response time reached saturation. The lifetime of the optimized probe with a 40% iron filling concentration is estimated to be 4.46 years. During repeated exposures to high temperatures, no permanent drift in its Bragg wavelength was observed, and its repeatability during a heating-cooling cycle exhibited hysteresis of less than 1%. Received: 23 April 2024 | Revised: 30 June 2024 | Accepted: 18 October 2024 Conflicts of Interest The authors declare that they have no conflicts of interest to this work. Data Availability Statement The data that support the findings of this study are available within the manuscript. Author Contribution Statement Raja Yasir Mehmood Khan: Conceptualization, Methodology, Software, Validation, Formal analysis, Investigation, Resources, Writing – original draft, Visualization. Rahim Ullah: Conceptualization, Validation, Resources, Data curation, Writing – original draft. Muhammad Faisal: Conceptualization, Validation, Resources, Data curation, Writing – review & editing, Visualization, Supervision, Project administration.Keywords
This publication has 38 references indexed in Scilit:
- Influence of silica fume and iron dust on mechanical properties of concreteConstruction and Building Materials, 2023
- A technique for conducting of reactor in-situ tests of optical fibres and FBG-sensors intended for in-vessel applications in thermonuclear facilitiesFusion Engineering and Design, 2023
- Investigating key factors for optimizing FBG inscribed by femtosecond laserOptics Communications, 2022
- Highly-sensitive fiber Bragg grating temperature sensors with metallic coatingsOptik, 2022
- Fiber Bragg grating sensors for aerospace applications: a reviewISSS Journal of Micro and Smart Systems, 2022
- Highly Sensitive FBG-Based Sensor for Temperature Measurement Operating in Optical FiberPlasmonics, 2021
- Regenerated Fibre Bragg Gratings: A critical assessment of more than 20 years of investigationsOptics & Laser Technology, 2021
- FBG Arrays for Quasi-Distributed Sensing: A ReviewPhotonic Sensors, 2021
- Metal-coated fiber Bragg grating for dynamic temperature sensorOptik, 2016
- Producing regenerated gratings in hydrogen-loaded single mode fiber by heat treatmentPhotonic Sensors, 2014