Al–Cu Composite Casting of Laser‐Deoxidized Copper: Bonding, Interfacial Chemistry, and Thermal Conductivity
Authors:
- Timon SteinhoffTSTimon Steinhoff
- Finn‐Lennard JanthurFJFinn‐Lennard Janthur
- Sascha ZimmermannSZSascha Zimmermann
- Jörg HermsdorfJHJörg Hermsdorf
- René GustusRGRené Gustus
- Ludger OvermeyerLOLudger Overmeyer
- Wolfgang Maus‐FriedrichsWMWolfgang Maus‐Friedrichs
- Hans Jürgen MaierHMHans Jürgen Maier
- Christian KloseCKChristian Klose
Open Access
- 23 February 2026
- journal article
- research article
- Published by Wiley in Advanced Engineering Materials
- Vol. 28 (12) , e202502800
Abstract
This work addresses a central challenge in Al–Cu compound casting: native copper oxides, which inhibit wetting and metallurgical bonding. A laser‐based deoxidation strategy (ns‐pulsed, 1064 nm) performed under oxygen‐free, XHV‐equivalent glovebox conditions, and quantifying subsequent oxide regrowth during realistic short‐term handling, is demonstrated. Surface roughness was tuned via pulse/line overlap (0% vs. 70%) and characterized using confocal microscopy and power spectral density analysis. X‐ray photoelectron spectroscopy reveals that laser processing under XHV‐equivalent conditions produces copper surfaces that are more than 98% oxide‐free and remain predominantly metallic for at least 720 h, whereas exposure to ambient air rapidly leads to the formation of a Cu 2 O/Cu(OH) 2 surface layer within 24 h. Subsequent post‐treatment heating promotes the transformation CuO CuO, in accordance with established low‐temperature oxidation pathways. Casting under XHV‐equivalent conditions yields fully bonded Al–Cu interfaces with the expected Al 2 Cu, AlCu, and Al 4 Cu 9 intermetallic layers. Intermetallic compound (IMC) morphology is more strongly governed by processing parameters (temperature, expected melt‐to‐solid ratio, and thermal history) than by minor short‐term oxide regrowth. Overall, laser deoxidation under XHV‐equivalent conditions emerges as a pretreatment that improves wetting, enables controllable IMC formation, and preserves high interfacial thermal conductivity in Al–Cu composite castings.Keywords
Funding Information
- Deutsche Forschungsgemeinschaft (394563137—SFB1368)
This publication has 31 references indexed in Scilit:
- Manipulating Wetting State of CFRP via One‐Step Laser Micro/NanostructuringSmall, 2025
- Use Phase-Oriented Innovation Assessment in Early Development Stages: A Value-In-Use Approach for Thermal Interface Materials2025
- Giant Decrease in Interfacial Energy of Liquid Metals by Native OxidesAdvanced Materials, 2024
- Cleaning of laser-induced periodic surface structures on copper by gentle wet chemical processingApplied Surface Science, 2024
- Oxygen‐Free Production—From Vision to ApplicationAdvanced Engineering Materials, 2023
- Development and Validation of a Calculation Routine for the Precise Determination of Pulse Overlap and Accumulated Fluence in Pulsed Laser Surface TreatmentAdvanced Engineering Materials, 2022
- Prediction of the Al-rich part of the Al-Cu phase diagram using cluster expansion and statistical mechanicsActa Materialia, 2020
- Advanced analysis of copper X‐ray photoelectron spectraSurface and Interface Analysis, 2017
- Controlling surface topography using pulsed laser micro structuringCIRP Annals, 2017
- Solder wetting behavior enhancement via laser-textured surface microcosmic topographyApplied Surface Science, 2016