A reasonable method to reduce the volume of the WC anvil
- 1 July 2024
- journal article
- research article
- Published by AIP Publishing in Review of Scientific Instruments
- Vol. 95 (7)
Abstract
With the continuous development of the diamond industry, the China-type cubic press (CCP) has gradually become larger. As a result, the volume of the tungsten carbide (WC) anvil has been increased. Considering that the WC anvil is sintered, a larger volume will deteriorate sintering quality, which could facilitate the formation of cracks during its operation. One feasible way to reduce the volume of the WC anvil is to decrease its diameter and height. Along these lines, in this work, by performing finite element simulations, it was found that a reduction in the diameter of the WC anvil would increase the von Mises stress (VMS) during the synthesis process, as well as reduce the service life of the WC anvil and the ultimate pressure of the CCP. At the same time, a smaller diameter of the WC anvil would cause a significant increase in the VMS of the base steel block, exceeding its yield limit. In addition, a reduction in the height of the WC anvil would lessen the VMS during the synthesis process, and the VMS of the base steel block will also decrease. A reduction in the height of the WC anvil will decrease the pretightening force on the WC anvil, thereby reducing its lateral support effect. When the interference fit was increased from 0.6 to 0.8 mm and the steel ring angle was changed from 1.5° to 1.1°, the pretightening force on the low WC anvil was similar to the pretightening force on the original WC anvil. Our work provides valuable insights for effectively reducing the volume of the WC anvil.Keywords
Funding Information
- National Natural Science Foundation of China (52272210, 51872112)
- Natural Science Foundation of Jilin Province (20220101005JC, SKL202302007)
This publication has 31 references indexed in Scilit:
- The analysis of the effect of the pressurization block on diamond synthesis cavity by finite element methodInternational Journal of Refractory Metals and Hard Materials, 2023
- Orientational Dependences of Diamonds Grown in the NiMnCo–Silicate–H2O–C System under HPHT Conditions and Implications to Natural DiamondsACS Earth and Space Chemistry, 2022
- Studies on the mechanism of large cavity to improve the growth rate of large diamond under HPHT conditionsJournal of Crystal Growth, 2019
- New assembly design suitable for tower-shaped large size single-crystal diamond growth under high pressure and high temperatureCrystEngComm, 2016
- Finite element design of a temperature field for high-pressure diamond synthesisDiamond and Related Materials, 2016
- The effect of phosphorus and nitrogen co-doped on the synthesis of diamond at high pressure and high temperatureInternational Journal of Refractory Metals and Hard Materials, 2016
- Design of a novel large volume cubic high pressure apparatus for raising the yield and quality of synthetic diamondJournal of Crystal Growth, 2015
- The impact of synthesis pressure on the thermoelectric properties of CoSb3Materials Letters, 2013
- Modeling of effective design of high pressure anvils used for large scale commercial production of gem quality large single crystal diamondDiamond and Related Materials, 2011
- Development of a hybrid-anvil type high-pressure device and its application to magnetic neutron scattering studiesJournal of Magnetism and Magnetic Materials, 2007