Sensorless Current Sharing Analysis and Scheme for Multiphase Converters
- 1 January 2007
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- No. 02759306,p. 2029-2036
Abstract
Current sharing control in multiphase converters is essential for stable and safe operation under variable conditions or applications. In conventional current sharing schemes, this requires the sensing and processing on each phase current through a current sharing/balancing controller, which adds complexity, size, and cost to the converter design. In most cases, conventional schemes are usually based on achieving a pre-set current sharing ratio between phases (usually equal current value among different phases), assuming that the phase design is known (or symmetric in the case of equal sharing ratio), which may not result in the optimum efficiency. The accuracy of achieving the pre-set current sharing ratio is sensitive to the current sensing accuracy in all phases, which requires careful and tedious calibration of sensing circuitries. In this paper, theoretical analysis results are presented to derive a sensor less current sharing method. The analysis is further expanded to reveal the boundary conditions that result in not achieving the desired current sharing ratio. The presented method is described and verified with experimental results from a proof of concept prototype based on digital controller implementation.Keywords
This publication has 16 references indexed in Scilit:
- Maximum Efficiency Point Tracking (MEPT) Method and Digital Dead Time Control ImplementationIEEE Transactions on Power Electronics, 2006
- DSP-CONTROLLED MULTIPHASE HYSTERETIC VRM WITH CURRENT SHARING EQUALIZATIONJournal of Circuits, Systems and Computers, 2005
- Piecewise digital control method for DC-DC converter2005
- Digital pulse width modulator architectures2004
- Online Calibration of MOSFET On-State Resistance for Precise Current SensingIEEE Power Electronics Letters, 2004
- Quantization resolution and limit cycling in digitally controlled PWM convertersIEEE Transactions on Power Electronics, 2003
- Sensorless current mode control-an observer-based technique for DC-DC convertersIEEE Transactions on Power Electronics, 2001
- Investigation of candidate VRM topologies for future microprocessorsIEEE Transactions on Power Electronics, 2000
- A novel current-sharing control technique for low-voltage high-current voltage regulator module applicationsIEEE Transactions on Power Electronics, 2000
- Dynamic performance of current-sensing power MOSFETsElectronics Letters, 1988