Characterizations and Inkjet Printing of Carbon Black Electrodes for Dielectric Elastomer Actuators
- 23 August 2023
- journal article
- research article
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 15 (35) , 41992-42003
Abstract
Dielectric elastomer actuators (DEAs) have been proposed as a promising technology for developing soft robotics and stretchable electronics due to their large actuation. Among available fabrication techniques, inkjet printing is a digital, mask-free, material-saving, and fast technology, making it versatile and appealing for fabricating DEA electrodes. However, there is still a lack of suitable materials for inkjet-printed electrodes. In this study, multiple carbon black (CB) inks were developed and tested as DEA electrodes inkjet-printed on acrylic membranes (VHB). Triethylene glycol monomethyl ether (TGME) and chlorobenzene (CLB) were selected to disperse CB. The inks' stability, particle size, surface tension, viscosity, electrical resistance, and printability were characterized. The DEA with Ink-TGME/CLB (mixture solvent) electrodes obtained 80.63% area strain, a new benchmark for the DEA actuation with CB powder electrodes on VHB. The novelty of this work involves the disclosure of a new ink recipe (TGME/CLB/CB) for inkjet printing that can obtain stable drop formations with a small nozzle (17 × 17 μm), high resolution (∼25 μm, approaching the limit of drop-on-demand inkjet printing), and the largest area strain of DEAs under similar conditions, distinguishing this contribution from the previous works, which is important for the fabrication and miniaturization of DEA-based soft and stretchable electronics.Keywords
Funding Information
- Deutsche Forschungsgemeinschaft (418669083)
This publication has 70 references indexed in Scilit:
- Spray deposited multilayered dielectric elastomer actuatorsSensors and Actuators A: Physical, 2011
- Graphene Electrodes for Artificial MusclesMolecular Crystals and Liquid Crystals, 2011
- Influence of Fluid Physical Properties on Ink-Jet PrintabilityLangmuir, 2009
- Fault‐Tolerant Dielectric Elastomer Actuators using Single‐Walled Carbon Nanotube ElectrodesAdvanced Materials, 2008
- Inkjet Printing of Narrow Conductive Tracks on Untreated Polymeric SubstratesAdvanced Materials, 2007
- All-inkjet-printed flexible electronics fabrication on a polymer substrate by low-temperature high-resolution selective laser sintering of metal nanoparticlesNanotechnology, 2007
- Fabrication of multilayer passive and active electric components on polymer using inkjet printing and low temperature laser processingSensors and Actuators A: Physical, 2007
- Interpenetrating Polymer Networks for High‐Performance Electroelastomer Artificial MusclesAdvanced Materials, 2006
- Ink-jet delivery of particle suspensions by piezoelectric droplet ejectorsJournal of Applied Physics, 2005
- Inkjet Printing of Highly Loaded Particulate SuspensionsMRS Bulletin, 2003