Iain Alexander Anderson
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Iain Alexander Anderson has a total of 70 co-authors. Here are the top co-authors by number of shared publications:
- Samuel Rosset
Biomimetics Laboratory Auckland Bioengineering Institute University of Auckland 70 Symonds Street Auckland 1010 New Zealand
8 shared publications - Ernst-Friedrich Markus Henke
TU Dresden
4 shared publications - Katherine E. Wilson
PowerON Group, Auckland 1010, New Zealand
4 shared publications - Sheng Quan Xie
School of Electronic and Electrical Engineering, University of Leeds, Leeds LS2 9JT, UK
4 shared publications - Allan Joshua Veale
Department of Mechanical Engineering, the University of Auckland, New Zealand
3 shared publications - Andreas Richter
Institut für Planetare Geodäsie, Technische Universität Dresden, 01069 Dresden, Germany
3 shared publications
Latest Publications
- 12 May 2026
- Published by Cassyni
What’s producing the rabbit ears! Our 19-year quest to understand the weird electrical behaviour of carbon-filled elastomers
Back in 2007 Ben O’Brien, while a Part IV undergrad engineering student identified an interesting phenomenon associated with carbon-filled composite sensors that we now refer to as the "rabbit-ear effect". His experimental results were described in a humble 2007 SPIE conference paper that is still very much alive today (6 citations in 2026 alone!). If you measured resistance across the sensor while actively stretching it, the resistance would suddenly jump high and then settle back. Relaxing the sensor produced the same result. The plot could resemble a pair of rabbit ears. This has remained a mystery until several years ago when Logan Ritchie another PhD student in our lab studied the phenomenon and made a beautiful discovery about the world of carbon-filled composites and their electrical behaviour. We are close to explaining what is at the bottom of the rabbit ears (Not ‘Bugs Bunny’s head’ either!).
- 12 May 2026
- Published by Cassyni
What’s producing the rabbit ears! Our 19-year quest to understand the weird electrical behaviour of carbon-filled elastomers
Back in 2007 Ben O’Brien, while a Part IV undergrad engineering student identified an interesting phenomenon associated with carbon-filled composite sensors that we now refer to as the "rabbit-ear effect". His experimental results were described in a humble 2007 SPIE conference paper that is still very much alive today (6 citations in 2026 alone!). If you measured resistance across the sensor while actively stretching it, the resistance would suddenly jump high and then settle back. Relaxing the sensor produced the same result. The plot could resemble a pair of rabbit ears. This has remained a mystery until several years ago when Logan Ritchie another PhD student in our lab studied the phenomenon and made a beautiful discovery about the world of carbon-filled composites and their electrical behaviour. We are close to explaining what is at the bottom of the rabbit ears (Not ‘Bugs Bunny’s head’ either!).
- Open Access
- 12 October 2025
- Published by Association for Computing Machinery (ACM)
- p. 352-356
EchoSense: Frontal Haptic Navigation in VR towards Biomimetic Empathy
- 12 October 2025
- Published by Association for Computing Machinery (ACM)
- p. 352-356
Open AccessEchoSense: Frontal Haptic Navigation in VR towards Biomimetic Empathy
- Open Access
- 21 August 2025
- Published by Elsevier in Computational Materials Science
- Vol. 259
Van der Waals-driven network restructuring explains time-dependent piezoresistivity in soft nanocomposites
- 21 August 2025
- Published by Elsevier in Computational Materials Science
- Vol. 259
Open AccessVan der Waals-driven network restructuring explains time-dependent piezoresistivity in soft nanocomposites
- Open Access
- 7 January 2025
- Published by IOP Publishing in Bioinspiration & Biomimetics
- Vol. 20 (1) , 016028
A bioinspired fish fin webbing for proprioceptive feedback
The propulsive fins of ray-finned fish are used for large scale locomotion and fine maneuvering, yet also provide sensory feedback regarding hydrodynamic loading and the surrounding environment. This information is gathered via nerve cells in the webbing between their fin rays. A similar bioinspired system that can gather force feedback from fin motion could enable valuable insight into robotic underwater locomotion improving swimming efficiency and orientation. Fins are largely composed of bendable rays that support an elastic membranous web. In this investigation we have produced a stretch-sensing web that can be used as a sensor for a robotic fin; a proprioceptive fin webbing capable of measuring hydrodynamic loads. Our soft capacitive sensor web is embedded in 350 µm thin film that is held between wires which emulate fin rays. These sensor web constructs were successfully tested in water tunnels and maintained their sensory performance at speeds up to 0.7 m s−1 and at angles-of-attack up to 90 degrees. We demonstrated sensor response as a function of water speed and angle of attack. Induced vibrations in the membrane from vortex shedding and flutter at high speeds were mitigated through the addition of passive chordwise stiffeners and tensioning of the membrane was investigated. Through understanding sensing membrane behavior in flow, the development of specialized fin webbing sensors becomes possible. This invention thus presents a milestone in advanced hydrodynamic sensing in fish robots enabling us to push further towards autonomous control loops in fish robots.
- 7 January 2025
- Published by IOP Publishing in Bioinspiration & Biomimetics
- Vol. 20 (1) , 016028
Open AccessA bioinspired fish fin webbing for proprioceptive feedback
The propulsive fins of ray-finned fish are used for large scale locomotion and fine maneuvering, yet also provide sensory feedback regarding hydrodynamic loading and the surrounding environment. This information is gathered via nerve cells in the webbing between their fin rays. A similar bioinspired system that can gather force feedback from fin motion could enable valuable insight into robotic underwater locomotion improving swimming efficiency and orientation. Fins are largely composed of bendable rays that support an elastic membranous web. In this investigation we have produced a stretch-sensing web that can be used as a sensor for a robotic fin; a proprioceptive fin webbing capable of measuring hydrodynamic loads. Our soft capacitive sensor web is embedded in 350 µm thin film that is held between wires which emulate fin rays. These sensor web constructs were successfully tested in water tunnels and maintained their sensory performance at speeds up to 0.7 m s−1 and at angles-of-attack up to 90 degrees. We demonstrated sensor response as a function of water speed and angle of attack. Induced vibrations in the membrane from vortex shedding and flutter at high speeds were mitigated through the addition of passive chordwise stiffeners and tensioning of the membrane was investigated. Through understanding sensing membrane behavior in flow, the development of specialized fin webbing sensors becomes possible. This invention thus presents a milestone in advanced hydrodynamic sensing in fish robots enabling us to push further towards autonomous control loops in fish robots.
- Open Access
- 23 November 2024
- Published by Association for Computing Machinery (ACM)
- p. 1-2
Finger Painting in VR: Multi-Dynamic Gestural Input for VR Painting
This study explores the multi-dynamic gestural interaction system using VR headsets and wearable devices, for enhancing VR painting with pressure control, gesture recognition, and haptic feedback. Testing demonstrated novel visual expressions through hand gestures, suggesting the potential for more nuanced and dynamic interactions in VR art and beyond.
- 23 November 2024
- Published by Association for Computing Machinery (ACM)
- p. 1-2
Open AccessFinger Painting in VR: Multi-Dynamic Gestural Input for VR Painting
This study explores the multi-dynamic gestural interaction system using VR headsets and wearable devices, for enhancing VR painting with pressure control, gesture recognition, and haptic feedback. Testing demonstrated novel visual expressions through hand gestures, suggesting the potential for more nuanced and dynamic interactions in VR art and beyond.
- Open Access
- 6 June 2024
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 141 (34)
The incompressibility assumption and piezoresistivity in stretchable conductive composites
Stretchable electronic conductors are vital components in soft robotics and flexible electronics. One method for producing these is combining conductive filler with a nonconductive elastomer. These composites commonly exhibit significant piezoresistivity. This work examines various mechanisms that may underlie this effect. These composites are generally analyzed through percolation theory, which describes the nonlinear relationship between filler volume fraction and conductivity. However, it is unclear whether percolation theory can explain their piezoresistivity or whether mechanisms such as rearrangement of the conductive network under deformation must be considered. This work compares volumetric change in the context of percolation theory against network rearrangement to examine the relative significance of these factors in determining piezoresistivity. Digital image correlation is utilized to investigate volumetric changes in carbon‐black silicone composites and finds that the typical assumption of incompressibility is reasonable, suggesting that volumetric changes alone cannot account for the behavior. A computational model is also developed, which implies that network rearrangement is likely a more significant factor and that interparticle interactions are crucial in understanding this effect. It was found that the most realistic modeling results were achieved only when both rigid and attractive interparticle interactions were accounted for in the model.
- 6 June 2024
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 141 (34)
Open AccessThe incompressibility assumption and piezoresistivity in stretchable conductive composites
Stretchable electronic conductors are vital components in soft robotics and flexible electronics. One method for producing these is combining conductive filler with a nonconductive elastomer. These composites commonly exhibit significant piezoresistivity. This work examines various mechanisms that may underlie this effect. These composites are generally analyzed through percolation theory, which describes the nonlinear relationship between filler volume fraction and conductivity. However, it is unclear whether percolation theory can explain their piezoresistivity or whether mechanisms such as rearrangement of the conductive network under deformation must be considered. This work compares volumetric change in the context of percolation theory against network rearrangement to examine the relative significance of these factors in determining piezoresistivity. Digital image correlation is utilized to investigate volumetric changes in carbon‐black silicone composites and finds that the typical assumption of incompressibility is reasonable, suggesting that volumetric changes alone cannot account for the behavior. A computational model is also developed, which implies that network rearrangement is likely a more significant factor and that interparticle interactions are crucial in understanding this effect. It was found that the most realistic modeling results were achieved only when both rigid and attractive interparticle interactions were accounted for in the model.
- 23 August 2023
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 15 (35) , 41992-42003
Characterizations and Inkjet Printing of Carbon Black Electrodes for Dielectric Elastomer Actuators
Dielectric elastomer actuators (DEAs) have been proposed as a promising technology for developing soft robotics and stretchable electronics due to their large actuation. Among available fabrication techniques, inkjet printing is a digital, mask-free, material-saving, and fast technology, making it versatile and appealing for fabricating DEA electrodes. However, there is still a lack of suitable materials for inkjet-printed electrodes. In this study, multiple carbon black (CB) inks were developed and tested as DEA electrodes inkjet-printed on acrylic membranes (VHB). Triethylene glycol monomethyl ether (TGME) and chlorobenzene (CLB) were selected to disperse CB. The inks' stability, particle size, surface tension, viscosity, electrical resistance, and printability were characterized. The DEA with Ink-TGME/CLB (mixture solvent) electrodes obtained 80.63% area strain, a new benchmark for the DEA actuation with CB powder electrodes on VHB. The novelty of this work involves the disclosure of a new ink recipe (TGME/CLB/CB) for inkjet printing that can obtain stable drop formations with a small nozzle (17 × 17 μm), high resolution (∼25 μm, approaching the limit of drop-on-demand inkjet printing), and the largest area strain of DEAs under similar conditions, distinguishing this contribution from the previous works, which is important for the fabrication and miniaturization of DEA-based soft and stretchable electronics.
- 23 August 2023
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 15 (35) , 41992-42003
Characterizations and Inkjet Printing of Carbon Black Electrodes for Dielectric Elastomer Actuators
Dielectric elastomer actuators (DEAs) have been proposed as a promising technology for developing soft robotics and stretchable electronics due to their large actuation. Among available fabrication techniques, inkjet printing is a digital, mask-free, material-saving, and fast technology, making it versatile and appealing for fabricating DEA electrodes. However, there is still a lack of suitable materials for inkjet-printed electrodes. In this study, multiple carbon black (CB) inks were developed and tested as DEA electrodes inkjet-printed on acrylic membranes (VHB). Triethylene glycol monomethyl ether (TGME) and chlorobenzene (CLB) were selected to disperse CB. The inks' stability, particle size, surface tension, viscosity, electrical resistance, and printability were characterized. The DEA with Ink-TGME/CLB (mixture solvent) electrodes obtained 80.63% area strain, a new benchmark for the DEA actuation with CB powder electrodes on VHB. The novelty of this work involves the disclosure of a new ink recipe (TGME/CLB/CB) for inkjet printing that can obtain stable drop formations with a small nozzle (17 × 17 μm), high resolution (∼25 μm, approaching the limit of drop-on-demand inkjet printing), and the largest area strain of DEAs under similar conditions, distinguishing this contribution from the previous works, which is important for the fabrication and miniaturization of DEA-based soft and stretchable electronics.
- 14 June 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Oceanic Engineering
- Vol. 48 (3) , 778-788
Diver-Robot Communication Glove Using Sensor-Based Gesture Recognition
Despite the popularity of the buddy system, where a pair of divers look out for each other, scuba diving still poses significant risks with 15–30 deaths per 100 000 divers per year. In the 2015 edition of “ Diving Medicine for Scuba Divers ,” it is reported that 86% of diving fatalities involve a lone diver, yet divers still elect to dive alone for a variety of reasons including buddy unavailability. A solution to this may lie in a dedicated autonomous dive-buddy robot, which could also operate as an assistant. The challenge is how would the diver interact and communicate with the robot in underwater conditions often involving low visibility. In this article, we detail and demonstrate a technological solution that involves the direct motion capture of fingers and hand using a smart dive glove with integrated stretch sensors alongside an inertial measurement unit. The hardware and gesture recognition protocol were initially evaluated in a lab-based study where 10 users participated in a virtual reality environment setup and interacted with a virtual robot using gestures. In total, 140 out of 175 gestures were correctly recognized, resulting in diver-robot commands. A full sea demonstration of the underwater motion-capture system followed with the underwater dive glove used to send gesture-based acoustic commands to a dedicated dive buddy, a modified autonomous underwater vehicle. The diver was able to command the robot to move in six directions with a total delay of 6 s or less between the beginning of the gesture and the initiation of the action by the robot.
- 14 June 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Oceanic Engineering
- Vol. 48 (3) , 778-788
Diver-Robot Communication Glove Using Sensor-Based Gesture Recognition
Despite the popularity of the buddy system, where a pair of divers look out for each other, scuba diving still poses significant risks with 15–30 deaths per 100 000 divers per year. In the 2015 edition of “ Diving Medicine for Scuba Divers ,” it is reported that 86% of diving fatalities involve a lone diver, yet divers still elect to dive alone for a variety of reasons including buddy unavailability. A solution to this may lie in a dedicated autonomous dive-buddy robot, which could also operate as an assistant. The challenge is how would the diver interact and communicate with the robot in underwater conditions often involving low visibility. In this article, we detail and demonstrate a technological solution that involves the direct motion capture of fingers and hand using a smart dive glove with integrated stretch sensors alongside an inertial measurement unit. The hardware and gesture recognition protocol were initially evaluated in a lab-based study where 10 users participated in a virtual reality environment setup and interacted with a virtual robot using gestures. In total, 140 out of 175 gestures were correctly recognized, resulting in diver-robot commands. A full sea demonstration of the underwater motion-capture system followed with the underwater dive glove used to send gesture-based acoustic commands to a dedicated dive buddy, a modified autonomous underwater vehicle. The diver was able to command the robot to move in six directions with a total delay of 6 s or less between the beginning of the gesture and the initiation of the action by the robot.
- 10 November 2022
- Published by IOP Publishing in Smart Materials and Structures
- Vol. 31 (12) , 125013
Design and testing of a capacitive interface for underwater stretch sensors
The growing popularity of wearable electronics has seen substantial research in soft and flexible strain sensors. From athletic performance analysis to human augmentation, there is a wide range of applications being developed. An area often overlooked is the connections between a network of wearable sensors and their measurement electronics. In dry applications this is as simple as cabling between the two. In underwater environments however this becomes more complicated. Capacitive strain sensors have been used to demonstrate underwater sensor-based motion capture in both a robotic fish and smart glove for divers. Wired connections introduced failure points and eliminated the modularity of the system for potted electronics. In this paper we have demonstrated the use of a capacitive interface as a wireless method to connect wearable strain sensors across an encapsulation to electronics. This removes the need to have wires permanently protruding through the encapsulation. The interfaces’ impact on strain sensor sensitivity and measurement method has been investigated for both resistive and capacitive-based strain sensing.
- 10 November 2022
- Published by IOP Publishing in Smart Materials and Structures
- Vol. 31 (12) , 125013
Design and testing of a capacitive interface for underwater stretch sensors
The growing popularity of wearable electronics has seen substantial research in soft and flexible strain sensors. From athletic performance analysis to human augmentation, there is a wide range of applications being developed. An area often overlooked is the connections between a network of wearable sensors and their measurement electronics. In dry applications this is as simple as cabling between the two. In underwater environments however this becomes more complicated. Capacitive strain sensors have been used to demonstrate underwater sensor-based motion capture in both a robotic fish and smart glove for divers. Wired connections introduced failure points and eliminated the modularity of the system for potted electronics. In this paper we have demonstrated the use of a capacitive interface as a wireless method to connect wearable strain sensors across an encapsulation to electronics. This removes the need to have wires permanently protruding through the encapsulation. The interfaces’ impact on strain sensor sensitivity and measurement method has been investigated for both resistive and capacitive-based strain sensing.
- 14 October 2022
- Published by Marine Technology Society in Marine Technology Society Journal
- Vol. 56 (5) , 26-35
Diver‐Robot Communication Using Wearable Sensing: Remote Pool Experiments
Diver‐robot interaction is an exciting and recent field of study. There are different ways a diver and robot can interact, such as using tablets or detecting divers with cameras or sonars. A novel approach presented in this paper uses direct diver‐robot communication. To facilitate communication for humans, we use typical diver gestures, which are transmitted to a robot using a wearable glove and acoustic communications. Following previous work by the University of Zagreb and the University of Auckland, a collaboration to control an autonomous underwater vehicle based on a wearable diver glove has been made possible through the EU Marine Robots project. Under this project, Trans-National Access trials allow Laboratory for Underwater Systems and Technologies, University of Zagreb, to offer its robots and infrastructure to external partners. Initial trials with the University of Auckland, which were planned to take place on site, were transformed into remote access trials. This paper reports on these challenging trials and collaboration given the distance and time zone difference. The key point is to demonstrate the possibility of having a diver remotely controlling a robot using typical gestures recognized by a wearable glove and transmitted via acoustic modems (and the Internet for the remote connection).
- 14 October 2022
- Published by Marine Technology Society in Marine Technology Society Journal
- Vol. 56 (5) , 26-35
Diver‐Robot Communication Using Wearable Sensing: Remote Pool Experiments
Diver‐robot interaction is an exciting and recent field of study. There are different ways a diver and robot can interact, such as using tablets or detecting divers with cameras or sonars. A novel approach presented in this paper uses direct diver‐robot communication. To facilitate communication for humans, we use typical diver gestures, which are transmitted to a robot using a wearable glove and acoustic communications. Following previous work by the University of Zagreb and the University of Auckland, a collaboration to control an autonomous underwater vehicle based on a wearable diver glove has been made possible through the EU Marine Robots project. Under this project, Trans-National Access trials allow Laboratory for Underwater Systems and Technologies, University of Zagreb, to offer its robots and infrastructure to external partners. Initial trials with the University of Auckland, which were planned to take place on site, were transformed into remote access trials. This paper reports on these challenging trials and collaboration given the distance and time zone difference. The key point is to demonstrate the possibility of having a diver remotely controlling a robot using typical gestures recognized by a wearable glove and transmitted via acoustic modems (and the Internet for the remote connection).