Investigation of the manufacturability and cost analysis of automotive brake disc and pad
Open Access
- 1 January 2023
- conference paper
- Published by AIP Publishing in AIP Conference Proceedings
- Vol. 2933 (1)
Abstract
The processing of metal in most industries is an important process in order to obtain products that will meet the service requirements. The aim of this study is to evaluate the manufacturability and cost analysis of the brake disc and pad of an automobile. The following materials were considered for the brake disc gray cast iron, stainless steel, aluminum 7075 and Al-MMC). The various materials considered for the brake pads are carbon fibre, E-glass fibre, Kelvar 29, asbestos fibre and ceramic fibre. For the brake disc, the manufacturing cost in a foundry was separated into the following elements: material cost, labour cost, direct and overhead expenses. A comparative analysis was carried out among the different manufacturing technologies for the manufacturing of the brake disc to determine the cost effectiveness of the manufacturing process. The technologies evaluated include foundry, CNS using powermill CAM simulation, CNC turning using Sinumerik CAM simulation as well as the hot moulding technology. The results obtained in this study indicated that the total machining time was highest in stainless steel, followed by cast iron and Al 7075 with the least machinig cost observed in Al-MMC. Furthermore, the stainless steel and gray cast iron have 36% of the casting manufacturing costs while aluminium 7075 and Al-MMC have 14%. In addition, the total machining cost was highest in stainless steel, followed by cast iron and Al 7075 with the least machinig cost observed in Al-MMC. Finally, the material cost was highest in carbon fibre followed by Kelvar 29. Next to this is asbestos and ceramic with the least material cost observed in E glass fibre. The findings of this study will aid the decision making process on the most feasible materials for the development of brake pad and disc in terms of the manufacturing time and costs.Keywords
This publication has 16 references indexed in Scilit:
- Mechanical properties of aluminium metal matrix composites-A reviewMaterials Today: Proceedings, 2021
- Measurement and optimization of cutting forces during M200 TS milling process using the response surface methodology and dynamometerProcedia CIRP, 2020
- Modelling and optimization of surface roughness during AISI P20 milling process using Taguchi methodThe International Journal of Advanced Manufacturing Technology, 2019
- Process Design for Optimal Minimization of Resultant Cutting Force during the Machining of Ti-6Al-4V: Response Surface Method and Desirability Function AnalysisProcedia CIRP, 2019
- Model Design and Optimization of Carbide Milling Cutter for Milling Operation of M200 Tool SteelProcedia CIRP, 2019
- Increase Productivity and Cost Optimization in CNC ManufacturingIOP Conference Series: Materials Science and Engineering, 2016
- On the prediction of surface roughness in the hard turning based on cutting parameters and tool vibrationsMeasurement, 2013
- Optimization of manufacturing process effects on brake friction material wearJournal of Composite Materials, 2012
- An experimental study on the effects of manufacturing parameters on the tribological properties of brake lining materialsWear, 2010
- Manufacturing cost estimation for machined parts based on manufacturing featuresJournal of Intelligent Manufacturing, 2002