Simulation of the mild wear of cams in valve trains under mixed lubrication
Authors:
- 25 July 2016
- journal article
- research article
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology
- Vol. 231 (5) , 552-560
Abstract
Cam–follower kinematic pairs in the valve trains of engines usually operate in the mixed lubrication regime and work under conditions of wear. The wear mode of cams in mixed lubricated contacts is mild, and the wear value is usually calculated using Archard’s equation in which the wear coefficient is closely related to the lubrication condition. In this study, a nonlinear relationship between the wear coefficient and lubricant oil film thickness under mixed lubrication is proposed with consideration of the rough height distribution of the contact surface. As the cam and flat tappet pair of the valve train in a diesel engine is concerned, the wear coefficient of the cam material for boundary lubrication conditions is measured. After calculating the lubricant oil thickness, the wear depths at different points of the cam are simulated, and results are consistent with the measured values in the practical test.Keywords
This publication has 23 references indexed in Scilit:
- A Methodology to Predict Surface Wear of Planetary Gears Under Dynamic Conditions#Mechanics Based Design of Structures and Machines, 2010
- Super low friction of DLC applied to engine cam follower lubricated with ester-containing oilTribology International, 2006
- Predictions of cam follower wear in diesel enginesWear, 2006
- Automotive tribology overview of current advances and challenges for the futureTribology International, 2004
- Automobile engine tribology — approaching the surfaceWear, 2000
- Automobile engine tribology—design considerations for efficiency and durabilityWear, 1998
- Simulation of the mild wear in a cam-follower contact with follower rotationWear, 1996
- Simulating follower wear in a cam—follower contactWear, 1994
- Fluid Film Lubrication in Automobile Valve TrainsProceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 1994
- Contact and Rubbing of Flat SurfacesJournal of Applied Physics, 1953