Rapid polishing process for the x ray reflector
- 16 September 2022
- journal article
- research article
- Published by Optica Publishing Group in Applied Optics
- Vol. 61 (27) , 7991-7998
Abstract
X ray mirrors are symmetrical workpieces along the length and width and are widely used in various optical systems. Unlike the center-symmetric circular mirror, it is more difficult to suppress the edge effect of the x ray mirror during the polishing process, which greatly limits the polishing accuracy and polishing efficiency. Based on this, the unique edge effect of x ray mirrors is investigated in depth in this paper. First, the causes and distribution laws of the edge effect of the x ray mirror were obtained by analyzing the inherent structure of the computer controlled optical surface (CCOS) and the motion trajectory of the polishing tool. Second, a mathematical model was established based on the material removal states of different regions on the x ray mirror. Finally, a combined polishing process based on the influence function of different shaped tools is proposed and experimentally verified. The results show that the edge effect on the x ray mirror is significantly weakened and its surface errors peak to valley (PV) and RMS are increased by 21.5 times and 47.9 times, respectively. This indicates that the combined polishing process has a good suppression effect on the edge effect of the x ray mirror.Keywords
Funding Information
- National Natural Science Foundation of China (51835013, 51991371)
This publication has 22 references indexed in Scilit:
- Modeling and analysis of sub-aperture tool influence functions for polishing curved surfacesPrecision Engineering, 2018
- Research on edge-control methods in CNC polishingJournal of the European Optical Society-Rapid Publications, 2017
- Modeling of edge effect in subaperture tool influence functions of computer controlled optical surfacingApplied Optics, 2016
- Edge control in a computer controlled optical surfacing process using a heterocercal tool influence functionOptics Express, 2016
- Nanofocusing of X-ray free-electron lasers by grazing-incidence reflective opticsJournal of Synchrotron Radiation, 2015
- Hard X-ray nanofocusing using adaptive focusing optics based on piezoelectric deformable mirrorsReview of Scientific Instruments, 2015
- Edge effect modeling and experiments on active lap processingOptics Express, 2014
- Modified subaperture tool influence functions of a flat-pitch polisher with reverse-calculated material removal rateApplied Optics, 2014
- Edges in CNC polishing: from mirror-segments towards semiconductors, paper 1: edges on processing the global surfaceOptics Express, 2012
- Applications of synchrotron radiation (ultraviolet spectral light source)Reports on Progress in Physics, 1973