Comparative Analysis of Aquifer Properties in Alluvial and Potwar Regions through Pumping Test Interpretation
Open Access
- 29 October 2025
- book chapter
- Published by IntechOpen
Abstract
Overall, there is ample variability in Punjab (Lower Indus Basin) and Potwar Aquifers (Upper Indus Basin), Pakistan, in terms of their hydraulic characteristics and yielding capabilities with longer time pumping durations. Alluvial aquifers tend to be considered of longer thicknesses and may have one length of screen with an appropriate slot opening for fine-medium-coarse (FMC) sand, while in Potwar aquifers, several screens of variable lengths with variable slot openings for boulder, gravels, and sandstone may be used. Data were collected from representative wells in each region (Punjab and Potwar), with four-step draw tests each of 120 minutes duration, along with a rate of discharge varying from 40 to 90 m3/sec. Likewise, constant-rate pump testing of 60 m3/hr was carried out for 72 hrs (static level 8.14 m), with a drawdown of 3.149 m. The recovery test took 8 hours to draw up the water level to its original static level. Interpretation of the time-drawdown data was made using established analytical methods such as the Theis solution, Cooper-Jacob straight-line method, and recovery test analysis. Results show that alluvial aquifers, consisting of unconsolidated sand and gravel, display high transmissivity and hydraulic conductivity, indicating favorable conditions for high-yield groundwater extraction. Conversely, the Potwar aquifers, composed of semi-consolidated sandstone and shale interbeds, exhibit significantly lower permeability and storativity, reflecting confined to semi-confined conditions with limited recharge capacity. Well loss computed at 60 m3/h is 0.22 m; aquifer loss is 2.68 m, and well efficiency by Hantush and Bierschenk method is 93%. Estimated transmissivity (m2/day) is 1914.Keywords
This publication has 15 references indexed in Scilit:
- Uncertainty assessment of aquifer hydraulic parameters from pumping test dataApplied Water Science, 2024
- Groundwater delineation for sustainable improvement and development aided by GIS, AHP, and MIF techniquesApplied Water Science, 2024
- Integrated geophysical interpretation and hydrogeochemistry investigation for groundwater aquifer assessment at El – Farafra depression, Western Desert, EgyptNRIAG Journal of Astronomy and Geophysics, 2022
- Step-drawdown test as a tool for the assessment of the Nubia sandstone aquifer in East El-Oweinat Area, EgyptEnvironmental Earth Sciences, 2019
- Performing Pumping Test Data Analysis Applying Cooper-Jacob’s Method for Estimating of the Aquifer ParametersMathematical Modelling in Civil Engineering, 2016
- The Design, Performance, and Analysis of Slug Tests1997
- Theory of flow in unconfined aquifers considering delayed response of the water tableWater Resources Research, 1972
- Drawdown Test to Determine Effective Radius of Artesian WellTransactions of the American Society of Civil Engineers, 1947
- A generalized graphical method for evaluating formation constants and summarizing well‐field historyEOS, Transactions American Geophysical Union, 1946
- The relation between the lowering of the Piezometric surface and the rate and duration of discharge of a well using ground‐water storageEOS, Transactions American Geophysical Union, 1935