Detonation characterization of low‐density emulsion explosives
- 23 May 2023
- journal article
- research article
- Published by Wiley in Propellants, Explosives, Pyrotechnics
- Vol. 48 (8)
Abstract
Due to the wide applicability and popularity of emulsion explosives (EEs) in the industry, ongoing advancements have been made in order to better understand and optimize the capabilities of EEs. Over the recent years, work has been developed to understand the effect that additives have on the detonation phenomena, and the energetic properties of EEs. In recent studies, most emphasis has been given to energetic additives, and little information is available regarding non‐energetic additives, despite their rising use in industrial applications. This work intends to do a detonation characterization of low‐density EEs, using EPS as a non‐energetic additive, in a concentration range of 0 % to 4 %, and consequently, an EEs density range of 1.12 g/cm3 down to 0.49 g/cm3. In order to characterize the detonation velocity and pressure of these EEs, different charge configurations (rectangular cross‐section and cylindrical) and measurement methods (discrete and quasi‐continuous) were used throughout this work. The results obtained, for these charge configurations and within EEs with these compositions and densities, display a linear behaviour for the detonation velocity, ranging from 2126 m/s up to 5581 m/s, and also for the values of the detonation pressure, varying between 3.3 GPa up to 11.7 GPa.Keywords
This publication has 41 references indexed in Scilit:
- Effect of explosive mixture on quality of explosive welds of copper to aluminiumMaterials & Design, 2016
- A new type of functional chemical sensitizer $\hbox {MgH}_{2}$ MgH 2 for improving pressure desensitization resistance of emulsion explosivesShock Waves, 2015
- Differences between the detonation behavior of emulsion explosives sensitized with glass or with polymeric micro-balloonsJournal of Physics: Conference Series, 2014
- Effect of explosive characteristics on the explosive welding of stainless steel to carbon steel in cylindrical configurationMaterials & Design (1980-2015), 2013
- Modification of W/O Emulsions by Demilitarized Composition BPropellants, Explosives, Pyrotechnics, 2012
- Investigation of low detonation velocity emulsion explosivesCombustion, Explosion, and Shock Waves, 2009
- Critical diameter and critical thickness of an emulsion explosiveCombustion, Explosion, and Shock Waves, 2008
- Detonation Velocity of Emulsion Explosives Containing CenospheresCombustion, Explosion, and Shock Waves, 2005
- Void size dependence of the steady detonation properties of emulsion explosives byJournal of Energetic Materials, 1989
- Detonation of highly diluted porous explosives. I. Effect of inert additives on detonation parametersCombustion, Explosion, and Shock Waves, 1980