Thermo-History-Dependent Copper Enrichment During High-Temperature Oxidation of Recycled Steels
Open Access
Abstract
The utilization of recycled steel is essential for achieving carbon neutrality and sustainable engineering, yet repeated recycling inevitably leads to the accumulation of residual elements that are difficult to remove during conventional refining. Among them, copper (Cu) readily enriches in scrap-based steels and is a primary cause of surface hot shortness during high-temperature processing due to its segregation at the oxide/steel interface. While the compositional effects of Cu have been extensively studied, the influence of thermo-history associated with different industrial processing routes remains poorly understood. In this work, Cu enrichment during high-temperature oxidation was systematically investigated under thermo-histories representative of conventional hot rolling, thin slab continuous casting and rolling (TSCR), and strip casting. Plain carbon steels containing 0.05–0.30 wt.% Cu were oxidized at 1000–1200 °C, and interfacial microstructures were characterized using SEM–EDS. The results show that Cu enrichment is highly sensitive to both temperature and thermal exposure time, with a critical temperature range of 1100–1150 °C promoting the formation of continuous Cu-rich liquid films. Prolonged thermo-history in conventional hot rolling markedly enhances Cu enrichment, TSCR partially suppresses interfacial segregation, whereas strip casting effectively inhibits Cu enrichment even at elevated Cu contents. These findings highlight thermo-history as a dominant factor controlling Cu-induced surface hot shortness and provide guidance for process optimization in recycled steels.Keywords
Funding Information
- National Key Research and Development Program of China (2025ZD0611202)
- National Natural Science Foundation of China (52293390)
- National Natural Science Foundation of China (52401137)
- National Natural Science Foundation of China (52371017)
- National Natural Science Foundation of China (52293395)
This publication has 21 references indexed in Scilit:
- The Interaction Between Oxidation-Related Phenomena Along Grain Boundaries on Surface Crack Formation in Continuous CastingMetallurgical and Materials Transactions B, 2025
- Scaling Behavior and Surface Quality of High-Strength Low-Alloy Steels with Higher Levels on Cu, Sn, and Ni Under Slab Reheating ConditionsHigh Temperature Corrosion of Materials, 2025
- High temperature oxidation behaviors of steels at initial stages in airCorrosion Science, 2024
- Scrap endowment and inequalities in global steel decarbonizationJournal of Cleaner Production, 2023
- Formation of multilayered scale in the process of high-temperature oxidation of steel S235Journal of Thermal Analysis and Calorimetry, 2022
- Finding the Most Efficient Way to Remove Residual Copper from Steel ScrapMetallurgical and Materials Transactions B, 2019
- The Role of Silicon in Hot Shortness Amelioration of Steel Containing Copper and TinOxidation of Metals, 2016
- Hot shortness behavior of a copper-alloyed high strength interstitial free steelMaterials Science and Engineering: A, 2013
- C-Cu-Fe (Carbon-Copper-Iron)Journal of Phase Equilibria and Diffusion, 2012
- The Effects of Nickel/Tin Ratio on Cu Induced Surface Hot Shortness in FeOxidation of Metals, 2011