Predicting Fatigue Life for Finite Line Contact under Starved Elastohydrodynamic Lubrication Condition
Open Access
- 22 January 2020
- journal article
- research article
- Published by Hindawi Limited in Mathematical Problems in Engineering
- Vol. 2020, 1-14
Abstract
Surface contact fatigue is the main failure mode in many mechanical components, such as gears, bearings, and cam-followers. A fatigue life prediction model is proposed for finite line contact under starved thermal elastohydrodynamic lubrication (TEHL) condition in this paper. Then, the effects of inlet oil-supply thickness, slide-to-roll ratio (SRR), and operating conditions on the lubrication performance and fatigue life are investigated. The results show that the lubrication characteristics and fatigue life of finite line contact are obviously different from those of fully flooded situation by introducing the starved lubrication condition. For example, the severe starved conditions lead to a significant increase in friction coefficient and decreased fatigue life. The variation of SRR has an important influence on the fatigue life. With the increase of SRR, the fatigue life decreases firstly and then increases. The stress concentration occurs near the surface when speed is low. In addition, under the low-speed situation, rotation speed variation has little effect on the fatigue life.Keywords
Funding Information
- National Key R&D Program of China (2017YFD0700905, 2017YFD0701105-03)
This publication has 24 references indexed in Scilit:
- A study on the effect of starvation in mixed elastohydrodynamic lubricationTribology International, 2014
- Non-Newtonian Starved Thermal-Elastohydrodynamic Lubrication of Finite Line ContactsTribology Transactions, 2013
- A mixed lubrication model with consideration of starvation and interasperity cavitationsProceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 2012
- Numerical Analysis of the Oil-Supply Condition in Isothermal Elastohydrodynamic Lubrication of Finite Line ContactsTribology Letters, 2010
- Pitting Life Prediction Based on a 3D Line Contact Mixed EHL Analysis and Subsurface von Mises Stress CalculationJournal of Tribology, 2009
- Thermal elastohydrodynamic lubrication of starved elliptical contactsTribology International, 2009
- Thermal and Non-Newtonian Numerical Analyses for Starved EHL Line ContactsJournal of Tribology, 2005
- Film Thickness in Starved EHL Point ContactsJournal of Tribology, 1998
- A Cavitation AlgorithmJournal of Lubrication Technology, 1981
- Optical Analysis of Ball Bearing StarvationJournal of Lubrication Technology, 1971