Effect of weak reductant on properties of electroless copper polyacrylonitrile nanocomposites for electromagnetic interference shielding
Authors:
- 27 May 2010
- journal article
- research article
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 118 (2) , 936-942
Abstract
In this work, the electroless copper method with different reductant compositions (NaHSO3/Na2 S2O3·5H2O and Na2S2O3·5H2O) without sensitizing and activating, was used to deposit copper‐sulfide deposition on the polyacrylonitrile (PAN) surface for electromagnetic interference (EMI) shielding materials. The weak reductant, NaHSO3, in the electroless copper method was used to control the phase of copper‐sulfide deposition. The Cux(x=1–1.8)S was deposited on the PAN (CuxS‐PAN) by reductant composition (NaHSO3/Na2S2O3·5H2O) and the Cux(x=1–1.8)S deposition of CuxS‐PAN possesses three kinds of copper‐sulfide phases (CuS, Cu1.75S and Cu1.8S). However, the electroless copper with reductant was only Na2S2O3·5H2O (without weak reductant, NaHSO3), the hexagonal CuS deposition was plated on the PAN (CuS‐PAN) and increased the EMI shielding effectiveness of CuS‐PAN composites about 10–15 dB. In this study, the best EMI SE of CuS‐PAN and CuxS‐PAN composites were about 27–30 dB and 15–17 dB respectively, as the cupric ion concentration was 0.24 M. The volume resistivity of CuS‐PAN composite was about 1000 times lower than that of CuxS‐PAN composite and lowest volume resistivity of CuS‐PAN composites was 0.012 Ω cm, as the cupric ion concentration was 0.24 M. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010Keywords
This publication has 23 references indexed in Scilit:
- Effect of swelling pretreatment on the deposition structure on electroless copper of polyacrylonitrile nanocomposites for electromagnetic interference shieldingJournal of Applied Polymer Science, 2008
- Synthesis of covellite (CuS) from the elementsSolid State Sciences, 2007
- Investigation of electrical conductivity and electromagnetic shielding effectiveness of polyaniline compositeScience and Technology of Advanced Materials, 2005
- The influence of heat treatment on electroless-nickel coated fibre (ENCF) on the mechanical properties and EMI shielding of ENCF reinforced ABS polymeric compositesSurface and Coatings Technology, 2004
- Studies on the influence of double-layer electroless metal deposition on the electromagnetic interference shielding effectiveness of carbon fiber/ABS compositesSurface and Coatings Technology, 2004
- The effect of attached fragments on dense layer of electroless Ni/P deposition on the electromagnetic interference shielding effectiveness of carbon fibre/acrylonitrile–butadiene–styrene compositesSurface and Coatings Technology, 2002
- Electromagnetic interference shielding effectiveness of electroless Cu-plated PET fabricsSynthetic Metals, 2001
- Effects of additives and chelating agents on electroless copper platingApplied Surface Science, 2001
- Polypyrrole-based conducting hot melt adhesives for EMI shielding applicationsSynthetic Metals, 1999
- EMI shielding plastics: A reviewAdvances in Polymer Technology, 1995