Chi‐Yuan Huang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Chi‐Yuan Huang has a total of 36 co-authors. Here are the top co-authors by number of shared publications:
Jen‐Taut Yeh
Department of Polymer Engineering, National Taiwan University of Science and Technology, Taipei 10607, Taiwan
4 shared publicationsKan‐Nan Chen
Department of Chemistry, Tamkang University, Tamsui 25137, Taiwan
4 shared publicationsSung‐Yeng Yang
Department of Chemical and Biochemical Engineering, Kao Yuan University, Kaohsiung County 82151, Taiwan
4 shared publicationsChang‐Cheng Chen
Department of Materials Engineering, Tatung University, Taipei 10452, Taiwan
2 shared publicationsChia-I Liu
Department of Materials Engineering, Tatung University, No.40, Chung‐Shan N. Rd., 3rd Sec., Taipei 104, Taiwan
2 shared publicationsChia‐I Liu
Department of Materials Engineering, Tatung University, No.40, Chung‐Shan N. Rd., 3rd Sec., Taipei 104, Taiwan
2 shared publications
Latest Publications
- 18 May 2012
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 126 (6) , 1906-1916
Drawing and ultimate tenacity properties of polyamide 6/attapulgite composite fibers
- 18 May 2012
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 126 (6) , 1906-1916
Drawing and ultimate tenacity properties of polyamide 6/attapulgite composite fibers
- 1 May 2011
- Published by Elsevier in Thin Solid Films
- Vol. 519 (15) , 4765-4773
The manufacture and investigation of multi-walled carbon nanotube/polypyrrole/EVA nano-polymeric composites for electromagnetic interference shielding
- 1 May 2011
- Published by Elsevier in Thin Solid Films
- Vol. 519 (15) , 4765-4773
The manufacture and investigation of multi-walled carbon nanotube/polypyrrole/EVA nano-polymeric composites for electromagnetic interference shielding
- 27 May 2010
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 118 (2) , 936-942
Effect of weak reductant on properties of electroless copper polyacrylonitrile nanocomposites for electromagnetic interference shielding
In this work, the electroless copper method with different reductant compositions (NaHSO3/Na2 S2O3·5H2O and Na2S2O3·5H2O) without sensitizing and activating, was used to deposit copper‐sulfide deposition on the polyacrylonitrile (PAN) surface for electromagnetic interference (EMI) shielding materials. The weak reductant, NaHSO3, in the electroless copper method was used to control the phase of copper‐sulfide deposition. The Cux(x=1–1.8)S was deposited on the PAN (CuxS‐PAN) by reductant composition (NaHSO3/Na2S2O3·5H2O) and the Cux(x=1–1.8)S deposition of CuxS‐PAN possesses three kinds of copper‐sulfide phases (CuS, Cu1.75S and Cu1.8S). However, the electroless copper with reductant was only Na2S2O3·5H2O (without weak reductant, NaHSO3), the hexagonal CuS deposition was plated on the PAN (CuS‐PAN) and increased the EMI shielding effectiveness of CuS‐PAN composites about 10–15 dB. In this study, the best EMI SE of CuS‐PAN and CuxS‐PAN composites were about 27–30 dB and 15–17 dB respectively, as the cupric ion concentration was 0.24 M. The volume resistivity of CuS‐PAN composite was about 1000 times lower than that of CuxS‐PAN composite and lowest volume resistivity of CuS‐PAN composites was 0.012 Ω cm, as the cupric ion concentration was 0.24 M. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010
- 27 May 2010
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 118 (2) , 936-942
Effect of weak reductant on properties of electroless copper polyacrylonitrile nanocomposites for electromagnetic interference shielding
In this work, the electroless copper method with different reductant compositions (NaHSO3/Na2 S2O3·5H2O and Na2S2O3·5H2O) without sensitizing and activating, was used to deposit copper‐sulfide deposition on the polyacrylonitrile (PAN) surface for electromagnetic interference (EMI) shielding materials. The weak reductant, NaHSO3, in the electroless copper method was used to control the phase of copper‐sulfide deposition. The Cux(x=1–1.8)S was deposited on the PAN (CuxS‐PAN) by reductant composition (NaHSO3/Na2S2O3·5H2O) and the Cux(x=1–1.8)S deposition of CuxS‐PAN possesses three kinds of copper‐sulfide phases (CuS, Cu1.75S and Cu1.8S). However, the electroless copper with reductant was only Na2S2O3·5H2O (without weak reductant, NaHSO3), the hexagonal CuS deposition was plated on the PAN (CuS‐PAN) and increased the EMI shielding effectiveness of CuS‐PAN composites about 10–15 dB. In this study, the best EMI SE of CuS‐PAN and CuxS‐PAN composites were about 27–30 dB and 15–17 dB respectively, as the cupric ion concentration was 0.24 M. The volume resistivity of CuS‐PAN composite was about 1000 times lower than that of CuxS‐PAN composite and lowest volume resistivity of CuS‐PAN composites was 0.012 Ω cm, as the cupric ion concentration was 0.24 M. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010
- 1 November 2009
- Published by Wiley in Macromolecular Symposia
- Vol. 286 (1) , 135-144
Influences of Plasma Treatment and 60Co γ-Ray Radiation on the Over-Voltage Positive Temperature Coefficient of High Density Polyethylene/Carbon Black Nano Composites
- 1 November 2009
- Published by Wiley in Macromolecular Symposia
- Vol. 286 (1) , 135-144
Influences of Plasma Treatment and 60Co γ-Ray Radiation on the Over-Voltage Positive Temperature Coefficient of High Density Polyethylene/Carbon Black Nano Composites
- 1 November 2009
- Published by Wiley in Macromolecular Symposia
- Vol. 286 (1) , 125-134
Effect of Initiator on the Over‐Voltage Positive Temperature Coefficient of Linear Low Density Polyethylene/Carbon Black Nano Composites
The composite of linear low density polyethylene (LLDPE) with carbon black (CB) and inorganic flame retardant (aluminum hydroxide, Al(OH)3) was prepared by melt‐blending method. The effect of cross‐linking on the stability of positive temperature coefficient (PTC) of composite and the elimination of negative temperature coefficient (NTC) of composite were investigated. LLDPE was chemically cross‐linking with different contents of initiator (dicumyl peroxide, DCP). The cross‐linking effects of composite were analyzed by gel content analysis, differential scanning calorimetry (DSC), and dynamic mechanical analysis (DMA). By the effect of DCP, not only the composite appeared a high PTC intensity, but also the NTC effect of composite was eliminated. In this investigation, the optimum PTC intensity of composite reached 5.87 orders of magnitude for the composition of LLD0.l0C33.7A28, and the PTC transitional temperature of composite decreased with increasing of DCP content. In addition, the good reproducibility of composites was proved by thermal cycling, and successfully passed the test of over‐voltage resistance.
- 1 November 2009
- Published by Wiley in Macromolecular Symposia
- Vol. 286 (1) , 125-134
Effect of Initiator on the Over‐Voltage Positive Temperature Coefficient of Linear Low Density Polyethylene/Carbon Black Nano Composites
The composite of linear low density polyethylene (LLDPE) with carbon black (CB) and inorganic flame retardant (aluminum hydroxide, Al(OH)3) was prepared by melt‐blending method. The effect of cross‐linking on the stability of positive temperature coefficient (PTC) of composite and the elimination of negative temperature coefficient (NTC) of composite were investigated. LLDPE was chemically cross‐linking with different contents of initiator (dicumyl peroxide, DCP). The cross‐linking effects of composite were analyzed by gel content analysis, differential scanning calorimetry (DSC), and dynamic mechanical analysis (DMA). By the effect of DCP, not only the composite appeared a high PTC intensity, but also the NTC effect of composite was eliminated. In this investigation, the optimum PTC intensity of composite reached 5.87 orders of magnitude for the composition of LLD0.l0C33.7A28, and the PTC transitional temperature of composite decreased with increasing of DCP content. In addition, the good reproducibility of composites was proved by thermal cycling, and successfully passed the test of over‐voltage resistance.
- 1 November 2009
- Published by Wiley in Macromolecular Symposia
- Vol. 286 (1) , 116-124
Electroless Copper Sulfide Deposition on the Polyacrylonitrile Films with Chelating Agents and its EMI Shielding Effectiveness
In this study, an effective deposition of copper sulfide (Cux(x = 1,2)S) on the PAN film was proposed by an electroless deposition method with the reduction agents NaHSO3 and Na2S2O3 · 5H2O and chelating agents (ethylenediaminetetraacetic acid, EDTA and triethanolamine, TEA). The mechanism of the Cux(x = 1,2)S growth and the electromagnetic interference shielding effectiveness (EMI SE) of the Cux(x = 1,2)S/PAN films were studied. It was found that the vinyl acetate monomer residue in the PAN substrate would be purged due to the swelling effect by EDTA and TEA solution. And then, the anchoring effect occurred due to the hydrogen bonding between the pits of the PAN substrate and the chelating agent. The swelling degree (Sd) was proposed and evaluated from the FT‐IR spectra. The relationship between swelling degree of the PAN films and EDTA concentration(C) is expressed as: Sd = 0.13 + 0.90 × eˆ(−15.15CEDTA). And TEA series is expressed as: Sd = 0.07 + 1.00 × eˆ(−15.15CTEA). On the other hand, the FESEM micrograph showed that the average thickness of copper sulfide increased from 76 nm to 383 nm when the concentration of EDTA increased from 0.00 M to 0.20 M. Consequently, the EMI SE of the Cux(x = 1,2)S/PAN films increased from 10∼12 dB to 25∼27 dB. The GIA‐XRD analyzer indicated that the deposited layer consisted of CuS and Cu2S.
- 1 November 2009
- Published by Wiley in Macromolecular Symposia
- Vol. 286 (1) , 116-124
Electroless Copper Sulfide Deposition on the Polyacrylonitrile Films with Chelating Agents and its EMI Shielding Effectiveness
In this study, an effective deposition of copper sulfide (Cux(x = 1,2)S) on the PAN film was proposed by an electroless deposition method with the reduction agents NaHSO3 and Na2S2O3 · 5H2O and chelating agents (ethylenediaminetetraacetic acid, EDTA and triethanolamine, TEA). The mechanism of the Cux(x = 1,2)S growth and the electromagnetic interference shielding effectiveness (EMI SE) of the Cux(x = 1,2)S/PAN films were studied. It was found that the vinyl acetate monomer residue in the PAN substrate would be purged due to the swelling effect by EDTA and TEA solution. And then, the anchoring effect occurred due to the hydrogen bonding between the pits of the PAN substrate and the chelating agent. The swelling degree (Sd) was proposed and evaluated from the FT‐IR spectra. The relationship between swelling degree of the PAN films and EDTA concentration(C) is expressed as: Sd = 0.13 + 0.90 × eˆ(−15.15CEDTA). And TEA series is expressed as: Sd = 0.07 + 1.00 × eˆ(−15.15CTEA). On the other hand, the FESEM micrograph showed that the average thickness of copper sulfide increased from 76 nm to 383 nm when the concentration of EDTA increased from 0.00 M to 0.20 M. Consequently, the EMI SE of the Cux(x = 1,2)S/PAN films increased from 10∼12 dB to 25∼27 dB. The GIA‐XRD analyzer indicated that the deposited layer consisted of CuS and Cu2S.
- 8 September 2009
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 115 (1) , 570-578
The copper sulfide coating on polyacrylonitrile with a chelating agent of ethylenediaminetetraacetic acid by an electroless deposition method and its EMI shielding effectiveness
In this study, a copper sulfide layer was instantaneously coated on the polyacrylonitrile (PAN) by an electroless plating method with the reduction agents NaHSO3 and Na2S2O3·5H2O and a chelating agent (ethylenediaminetetraacetic acid, EDTA). A variety of concentrations of EDTA was added to obtain the anchoring effect and chelating effect in the electroless plating bath. The mechanism of the Cux(x = 1, 2)S growth and the electromagnetic interference shielding effectiveness (EMI SE) of the composite were studied. It was found that the vinyl acetate was residual in PAN substrate would be purged due to the swelling effect by EDTA solution. Then, the anchoring effect occurred due to the hydrogen bonding between the pits of PAN substrate and the chelating agent. Consequently, the copper sulfide layer deposited successfully by the electroless plating reacted upon EDTA. The swelling degree (Sd) was proposed and evaluated from the FTIR spectra. The relationship between swelling degree of the PAN composite and EDTA concentration (C) is expressed as follows: Sd = 0.13 + 0.90 × e(−15.15C). On the other hand, the FESEM micrograph showed that the average thickness of copper sulfide increased from 76 to 383 nm when the concentration of EDTA increased from 0.00 to 0.20M. For this reason, the EMI SE of the composites increased from 10–12 dB to 20–23 dB. The GIA‐XRD and laser Raman analysis indicated that the deposited layer consisted of CuS and Cu2S. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010
- 8 September 2009
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 115 (1) , 570-578
The copper sulfide coating on polyacrylonitrile with a chelating agent of ethylenediaminetetraacetic acid by an electroless deposition method and its EMI shielding effectiveness
In this study, a copper sulfide layer was instantaneously coated on the polyacrylonitrile (PAN) by an electroless plating method with the reduction agents NaHSO3 and Na2S2O3·5H2O and a chelating agent (ethylenediaminetetraacetic acid, EDTA). A variety of concentrations of EDTA was added to obtain the anchoring effect and chelating effect in the electroless plating bath. The mechanism of the Cux(x = 1, 2)S growth and the electromagnetic interference shielding effectiveness (EMI SE) of the composite were studied. It was found that the vinyl acetate was residual in PAN substrate would be purged due to the swelling effect by EDTA solution. Then, the anchoring effect occurred due to the hydrogen bonding between the pits of PAN substrate and the chelating agent. Consequently, the copper sulfide layer deposited successfully by the electroless plating reacted upon EDTA. The swelling degree (Sd) was proposed and evaluated from the FTIR spectra. The relationship between swelling degree of the PAN composite and EDTA concentration (C) is expressed as follows: Sd = 0.13 + 0.90 × e(−15.15C). On the other hand, the FESEM micrograph showed that the average thickness of copper sulfide increased from 76 to 383 nm when the concentration of EDTA increased from 0.00 to 0.20M. For this reason, the EMI SE of the composites increased from 10–12 dB to 20–23 dB. The GIA‐XRD and laser Raman analysis indicated that the deposited layer consisted of CuS and Cu2S. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010
- 1 July 2009
- Published by Elsevier in Thin Solid Films
- Vol. 517 (17) , 4984-4988
Electroless deposition of the copper sulfide coating on polyacrylonitrile with a chelating agent of triethanolamine and its EMI Shielding Effectiveness
- 1 July 2009
- Published by Elsevier in Thin Solid Films
- Vol. 517 (17) , 4984-4988
Electroless deposition of the copper sulfide coating on polyacrylonitrile with a chelating agent of triethanolamine and its EMI Shielding Effectiveness
- 10 November 2008
- Published by Wiley in Macromolecular Symposia
- Vol. 272 (1) , 150-155
Improving the Processing Ability and Mechanical Strength of Starch/Poly(vinyl alcohol) Blends through Plasma and Acid Modification
Summary: In this study, maleic anhydride (MA), and citric acid (CA) used as the processing additive and plasma treatment to improve the processing ability and mechanical strength of biodegradable starch/poly (vinyl alcohol) (PVA) blends were studied. The melt flow index (MFI) of starch/ glycerol/PVA (300g/60g/80g) blend was increased from 2.3g/10min to 32.7g/10min by adding 3g of MA and to 130 g/10min by adding MA and plasma treatment. The tensile strength of starch/glycerol/PVA blend increased from 3.48 to 6.21 MPa by adding 1.5g of MA and 1.5g of CA, while it increased to 6.26 MPa by plasma treatment. Esterification reaction which was evidenced by FTIR has been showed to improve the compatibility between starch and PVA when MA was dissolved into glycerol and glycerol grafted onto plasma pretreatment PVA. Thermogravimetric analysis (TGA) and scanning electron microscopy (SEM) imaging were used to study the morphology of extruded blends.
- 10 November 2008
- Published by Wiley in Macromolecular Symposia
- Vol. 272 (1) , 150-155
Improving the Processing Ability and Mechanical Strength of Starch/Poly(vinyl alcohol) Blends through Plasma and Acid Modification
Summary: In this study, maleic anhydride (MA), and citric acid (CA) used as the processing additive and plasma treatment to improve the processing ability and mechanical strength of biodegradable starch/poly (vinyl alcohol) (PVA) blends were studied. The melt flow index (MFI) of starch/ glycerol/PVA (300g/60g/80g) blend was increased from 2.3g/10min to 32.7g/10min by adding 3g of MA and to 130 g/10min by adding MA and plasma treatment. The tensile strength of starch/glycerol/PVA blend increased from 3.48 to 6.21 MPa by adding 1.5g of MA and 1.5g of CA, while it increased to 6.26 MPa by plasma treatment. Esterification reaction which was evidenced by FTIR has been showed to improve the compatibility between starch and PVA when MA was dissolved into glycerol and glycerol grafted onto plasma pretreatment PVA. Thermogravimetric analysis (TGA) and scanning electron microscopy (SEM) imaging were used to study the morphology of extruded blends.
- 10 November 2008
- Published by Wiley in Macromolecular Symposia
- Vol. 272 (1) , 143-149
The Effects of the Modified Starches on the Melting Flow and Biodegradation of the Starch/Glycerol Blend
- 10 November 2008
- Published by Wiley in Macromolecular Symposia
- Vol. 272 (1) , 143-149
The Effects of the Modified Starches on the Melting Flow and Biodegradation of the Starch/Glycerol Blend