A Sea-State-Dependent Control Strategy for Wave Energy Converters: Power Limiting in Large Wave Conditions and Energy Maximising in Moderate Wave Conditions
- 5 March 2024
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Sustainable Energy
- Vol. 15 (3) , 1743-1753
Abstract
Conventional control strategies for wave energy converters (WECs) maximise power capture of the WEC by amplifying its responses, but this exacerbates hardware constraint violations not generally taken into account, causing undesirable shutdown of electrical systems in adverse wave conditions. When WECs operate close to power take-off (PTO) capacity, the primary control objective is to limit peak power for hardware protection purposes, enabling longer continuous electricity generation time. In this paper, we propose a sea-state-dependent control strategy based on model predictive control to maximise the annual energy production of a WEC with a realistic PTO: in small to moderate sea states it adopts a conventional energy-maximising objective function to increase output power, while in higher sea states a speed-limiting objective function may be utilised to enable longer generating time before shutdown becomes necessary. While this control strategy applies to a wide range of WECs, here we carry out the case study on an attenuator WEC called M4, with gearbox transmission and a permanent magnet synchronous generator (PMSG) as its PTO, which is being designed for a 1/4 scale ocean test in Albany, Australia. Simulation results show that compared with a benchmark passive damping controller, a 66% increase in annual energy production can be expected at the targeted site.Keywords
Funding Information
- Engineering and Physical Sciences Research Council (EP/V040650/2, EP/V040510/1)
- Newton Advanced Fellowship
- Royal Society (NA160436)
This publication has 20 references indexed in Scilit:
- Experimental study of mooring forces on the multi-float WEC M4 in large waves with buoy and elastic cablesOcean Engineering, 2022
- A generic linear non-causal optimal control framework integrated with wave excitation force prediction for multi-mode wave energy converters with application to M4Applied Ocean Research, 2020
- Large capacity multi-float configurations for the wave energy converter M4 using a time-domain linear diffraction modelApplied Ocean Research, 2017
- State-of-the-art in wind turbine control: Trends and challengesRenewable and Sustainable Energy Reviews, 2016
- Three-float broad-band resonant line absorber with surge for wave energy conversionRenewable Energy, 2015
- Capture width of the three-float multi-mode multi-resonance broadband wave energy line absorber M4 from laboratory studies with irregular waves of different spectral shape and directional spreadJournal of Ocean Engineering and Marine Energy, 2015
- Model predictive control of sea wave energy converters – Part I: A convex approach for the case of a single deviceRenewable Energy, 2014
- Quantifying the global wave power resourceRenewable Energy, 2012
- Stability of switched systems with average dwell-time2003
- Basic problems in stability and design of switched systemsIEEE Control Systems, 1999