Focused-ion-beam-inflicted surface amorphization and gallium implantation—new insights and removal by focused-electron-beam-induced etching
Authors:
- P RoedigerPRP Roediger
- H D WanzenboeckHWH D Wanzenboeck
- S WaidSWS Waid
- G HochleitnerGHG Hochleitner
- E BertagnolliEBE Bertagnolli
- 7 April 2011
- journal article
- research article
- Published by IOP Publishing in Nanotechnology
- Vol. 22 (23) , 235302
Abstract
Recently focused-electron-beam-induced etching of silicon using molecular chlorine (Cl(2)-FEBIE) has been developed as a reliable and reproducible process capable of damage-free, maskless and resistless removal of silicon. As any electron-beam-induced processing is considered non-destructive and implantation-free due to the absence of ion bombardment this approach is also a potential method for removing focused-ion-beam (FIB)-inflicted crystal damage and ion implantation. We show that Cl(2)-FEBIE is capable of removing FIB-induced amorphization and gallium ion implantation after processing of surfaces with a focused ion beam. TEM analysis proves that the method Cl(2)-FEBIE is non-destructive and therefore retains crystallinity. It is shown that Cl(2)-FEBIE of amorphous silicon when compared to crystalline silicon can be up to 25 times faster, depending on the degree of amorphization. Also, using this method it has become possible for the first time to directly investigate damage caused by FIB exposure in a top-down view utilizing a localized chemical reaction, i.e. without the need for TEM sample preparation. We show that gallium fluences above 4 × 10(15) cm(-2) result in altered material resulting from FIB-induced processes down to a depth of ∼ 250 nm. With increasing gallium fluences, due to a significant gallium concentration close beneath the surface, removal of the topmost layer by Cl(2)-FEBIE becomes difficult, indicating that gallium serves as an etch stop for Cl(2)-FEBIE.Keywords
This publication has 25 references indexed in Scilit:
- Nanoimprint lithography stamp modification utilizing focused ion beamsJournal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures Processing, Measurement, and Phenomena, 2009
- Gas-assisted focused electron beam and ion beam processing and fabricationJournal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures Processing, Measurement, and Phenomena, 2008
- High-Quality Sample Preparation by Low kV FIB Thinning for Analytical TEM MeasurementsMicroscopy and Microanalysis, 2007
- Gallium Ion Implantation into Niobium Thin Films Using a Focused-Ion BeamIEEE Transactions on Applied Superconductivity, 2005
- FIB‐induced damage in siliconJournal of Microscopy, 2004
- Focused ion beam induced surface amorphization and sputter processesJournal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures Processing, Measurement, and Phenomena, 2003
- Defects and gallium-contamination during focused ion beam micro machining2000
- Local material removal by focused ion beam milling and etchingNuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms, 1995
- Focused-ion-beam implantation of Ga in elemental and compound semiconductorsJournal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures Processing, Measurement, and Phenomena, 1995
- Integrated circuit repair using focused ion beam millingJournal of Vacuum Science & Technology B, 1986