Precision Electrochemical Micro-Machining of Molybdenum in Neutral Salt Solution Based on Electrochemical Analysis
Open Access
- 26 September 2024
- journal article
- research article
- Published by MDPI AG in Micromachines
- Vol. 15 (10) , 1191
Abstract
Molybdenum is an important material in modern industry, widely used in extreme environments such as rocket engine nozzles and microelectrodes due to its high melting point, excellent mechanical properties, and thermal conductivity. However, as a difficult-to-machine metal, traditional machining methods struggle to achieve the desired microstructures in molybdenum. Electrochemical machining (ECM) offers unique advantages in manufacturing fine structures from hard-to-machine metals. Studies have shown that molybdenum exhibits a fast corrosion rate in alkaline or acidic solutions, posing significant environmental pressure. Therefore, this study investigates the electrochemical machining of molybdenum in neutral salt solutions to achieve high-precision microstructure fabrication. First, the polarization curves and electrochemical impedance spectroscopy (EIS) of molybdenum in NaNO3 solutions of varying concentrations were measured to determine its electrochemical reaction characteristics. The results demonstrate that molybdenum exhibits good electrochemical reactivity in NaNO3 solutions, leading to favorable surface erosion morphology. Subsequently, a mask electrochemical machining technique was employed to fabricate arrayed microstructures on the molybdenum surface. To minimize interference between factors, an orthogonal experiment was used to optimize the parameter combination, determining the optimal machining process parameters. Under these optimal conditions, an array of micro-groove structures was successfully fabricated with an average groove width of 110 μm, a depth-to-width ratio of 0.21, an aspect ratio of 9000, and a groove width error of less than 5 μm.Keywords
Funding Information
- National Natural Science Foundation of China (52205472)
This publication has 35 references indexed in Scilit:
- On the localized corrosion of AA5083 in a simulated dynamic seawater/air interface—Part 2: effects of wetting timeCorrosion Science, 2023
- Corrosion and passive film characteristics of 3D‐printed NiTi shape memory alloys in artificial salivaRare Metals, 2023
- Optimization of Process Parameters for Laser Cutting of AZ31B Magnesium Alloy Based on Orthogonal Experiment and BP Neural NetworkTransactions of the Indian Institute of Metals, 2023
- Enhancement of the corrosion resistance of Molybdenum by La2O3 dispersionCorrosion Science, 2021
- Electrochemical machining of complex components of aero-engines: Developments, trends, and technological advancesChinese Journal of Aeronautics, 2021
- Modeling electrochemical impedance spectroscopyCurrent Opinion in Electrochemistry, 2019
- Through-mask electrochemical machining of hole arrays on molybdenum sheetsThe International Journal of Advanced Manufacturing Technology, 2017
- Component parameter optimization of strengthen waterjet grinding slurry with the orthogonal-experiment-design-based ANFISThe International Journal of Advanced Manufacturing Technology, 2016
- Improving machining accuracy of electrochemical machining blade by optimization of cathode feeding directionsThe International Journal of Advanced Manufacturing Technology, 2013
- Effects of temperature on the protective property, structure and composition of the oxide film on Alloy 625Corrosion Science, 2009