A 4.6–400 K Functional Ringamp-Based 250 MS/s 12 b Pipelined ADC With PVT-Robust Unity-Gain-Frequency-Aware Bias Calibration
- 9 November 2023
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Solid-State Circuits
- Vol. 59 (3) , 740-752
Abstract
This article presents a process voltage temperature (PVT) -robust ring amplifier that enables a high speed pipelined analog-to-digital-converter (ADC) without gain calibration, operating across a temperature range of 4.6–400 K. To ensure the stability of the ringamp, given the large variation of MOSFET transconductance, threshold voltage, and drain resistance across temperature, we propose a unity-gain-frequency-aware bias calibration and a 1st-stage bias-enhancement technique. The unity-gain-frequency-aware bias calibration stabilizes the amplifier bandwidth by biasing the 3rd stage of the ringamp using a constant- $Gm$ circuit and then optimizing the overall phase margin by tuning the 1st and 2nd stages based on feedback from an amplifier output settling monitor. An additional bias-enhancement technique alleviates the issue of insufficient voltage headroom at cryogenic temperatures (CTs) in the fully differential first stage of the ringamp. This is achieved by separately ac-coupling the NMOS and PMOS of the 1st-stage inverter. Furthermore, to deal with insufficient gain in advanced CMOS process, a cascode correlated-level-shifting (CLS) technique is proposed. This enables gain-calibration-free operation while achieving higher speed than conventional CLS. A 12-bit 250 MS/s pipelined ADC prototype is fabricated with the proposed ringamp in 65 nm CMOS technology. It achieves a signal to noise and distortion ratio (SNDR) above 57.7 dB across the 4.6–400 K temperature range, and Walden figure-of-merit (FoM) of 154 fJ/conv.-step at 4.6 K while operating without any gain calibrations. To the best of our knowledge, the achieved functional temperature range is the widest ever reported for a pipelined ADC.Keywords
Funding Information
- Japan Science and Technology Agency (JST) (JPMJMS2067)
This publication has 36 references indexed in Scilit:
- A Cryogenic 1 GSa/s, Soft-Core FPGA ADC for Quantum Computing ApplicationsIEEE Transactions on Circuits and Systems I: Regular Papers, 2016
- A 1 mW 71.5 dB SNDR 50 MS/s 13 bit Fully Differential Ring Amplifier Based SAR-Assisted Pipeline ADCIEEE Journal of Solid-State Circuits, 2015
- A 100 MS/s, 10.5 Bit, 2.46 mW Comparator-Less Pipeline ADC Using Self-Biased Ring AmplifiersIEEE Journal of Solid-State Circuits, 2015
- A low-power cryogenic analog to digital converter in standard CMOS technologyCryogenics, 2013
- Ring Amplifiers for Switched Capacitor CircuitsIEEE Journal of Solid-State Circuits, 2012
- A Single-Channel, 1.25-GS/s, 6-bit, 6.08-mW Asynchronous Successive-Approximation ADC With Improved Feedback Delay in 40-nm CMOSIEEE Journal of Solid-State Circuits, 2012
- Design of a Split-CLS Pipelined ADC With Full Signal Swing Using an Accurate But Fractional Signal Swing OpampIEEE Journal of Solid-State Circuits, 2010
- A cryogenic analog to digital converter operating from 300 K down to 4.4 KReview of Scientific Instruments, 2010
- An 8-Bit Flash Analog-to-Digital Converter in Standard CMOS Technology Functional From 4.2 K to 300 KIEEE Journal of Solid-State Circuits, 2009
- An Over-60 dB True Rail-to-Rail Performance Using Correlated Level Shifting and an Opamp With Only 30 dB Loop GainIEEE Journal of Solid-State Circuits, 2008