Gas Transport Impedance in Segmented-in-Series Tubular Solid Oxide Fuel Cell
- 1 January 2011
- journal article
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 158 (2) , B215-B224
Abstract
Gas phase transport is a very important electrode process in practical solid oxide fuel cells. In this study, we have identified gas conversion impedance and gas diffusion impedance in the Mitsubishi segmented-in-series tubular solid oxide fuel cell. Gas conversion impedance is caused by the weak convection transport in the gas flow channel. It is observed that both the insufficient anode and cathode gas flow rates can result in the gas conversion impedance. Gas conversion impedance appears at less than 0.1Hz0.1Hz , and its magnitude strongly depends on the gas flow rates. It disappears when the gas flow rates of both the anode and cathode are improved sufficiently. Anode gas diffusion through the porous substrate appears at ∼0.5Hz∼0.5Hz and dominates the overall diffusion impedance. Cathode gas diffusion through the porous current collecting layer appears at ∼3Hz∼3Hz , which significantly contributes to the overall gas diffusion impedance under low cathode oxygen partial pressures.Keywords
This publication has 32 references indexed in Scilit:
- Investigation of solid oxide fuel cell short stacks for mobile applications by electrochemical impedance spectroscopyElectrochimica Acta, 2008
- Diffusion and conversion impedance in solid oxide fuel cellsElectrochimica Acta, 2008
- Physically Based Impedance Modeling of Ni/YSZ Cermet AnodesJournal of the Electrochemical Society, 2008
- Detailed Characterization of Anode-Supported SOFCs by Impedance SpectroscopyJournal of the Electrochemical Society, 2007
- Gas-Diffusion Process in a Tubular Cathode Substrate of a SOFCJournal of the Electrochemical Society, 2004
- Performance comparison of Fick’s, dusty-gas and Stefan–Maxwell models to predict the concentration overpotential of a SOFC anodeJournal of Power Sources, 2003
- Current-Voltage Characteristics and Impedance Analysis of Solid Oxide Fuel Cells for Mixed H[sub 2] and CO GasesJournal of the Electrochemical Society, 2002
- Electrochemical Oxidation of H[sub 2] and CO in a H[sub 2]-H[sub 2]O-CO-CO[sub 2] System at the Interface of a Ni-YSZ Cermet Electrode and YSZ ElectrolyteJournal of the Electrochemical Society, 2000
- Gas Diffusion Impedance in Characterization of Solid Oxide Fuel Cell AnodesJournal of the Electrochemical Society, 1999
- Gas Conversion Impedance: A Test Geometry Effect in Characterization of Solid Oxide Fuel Cell AnodesJournal of the Electrochemical Society, 1998