Envelope Design Trade-Offs for Low-Carbon Residential Buildings in Dubai: A Simulation-Based Multi-Objective Optimization Study
Preprint
- 5 June 2026
- preprint
- Published by MDPI AG in Preprints.org
Abstract
Residential buildings in Dubai experience high cooling demand due to extreme climatic conditions, increasing both operational energy consumption and carbon-related environmental impacts. While previous studies have commonly focused on operational energy reduction, fewer investigations have simultaneously examined thermal comfort and embodied carbon implications within residential envelope optimization. This study investigates envelope design trade-offs for low-carbon residential buildings in Dubai through a simulation-based multi-objective optimization framework. A two-story residential villa prototype was developed in DesignBuilder and evaluated under Dubai climatic conditions using an EnergyPlus engine and hourly weather data. Five envelope-related variables were optimized, including window-to-wall ratio, glazing type, external shading depth, wall construction, and roof construction, while occupancy, HVAC performance, ventilation, and operational schedules remained fixed. Optimization was conducted to identify balanced envelope solutions based primarily on annual site energy consumption and thermal discomfort, while embodied carbon was retained as a supporting material-impact indicator. The baseline model recorded an annual site energy use of 40,427.48 kWh/year, corresponding to 189.44 kWh/m²·year, with 3,036.50 annual discomfort hours. Optimized solutions achieved reductions in annual site energy use to approximately 18,107 kWh/year, representing an improvement of nearly 55% relative to the baseline case. Results consistently favored moderate window-to-wall ratios, low-emissivity glazing, insulated roof assemblies, and external shading strategies. The findings provide practical guidance for climate-responsive residential envelope design in Dubai and contribute evidence for balancing operational and embodied environmental performance in cooling-dominated climates.Keywords
All Related Versions
This publication has 27 references indexed in Scilit:
- Towards high-performance buildings for thermal resilience and healthEnergy and Buildings, 2025
- Passive-solar design: Evidence of the disconnect between theory, policy and practice in the glazing design of contemporary Australian homesEnergy and Buildings, 2025
- Analysis of window parameters and shading strategies in buildings in hyper-arid desert coastal climates: a case study for KuwaitDiscover Sustainability, 2025
- Genetic algorithm-based multi-objective optimisation for energy-efficient building retrofitting: A systematic reviewEnergy and Buildings, 2024
- Co-optimization of passive building and active solar heating system based on the objective of minimum carbon emissionsEnergy, 2023
- The effect of a warming climate on the relevance of passive design measures for heating and cooling of European single-family detached buildingsEnergy and Buildings, 2022
- Multi-objective optimization of building design for life cycle cost and CO2 emissions: A case study of a low-energy residential building in a severe cold climateBuilding Simulation, 2021
- Embodied GHG emissions of buildings – The hidden challenge for effective climate change mitigationApplied Energy, 2020
- Embodied carbon mitigation and reduction in the built environment – What does the evidence say?Journal of Environmental Management, 2016
- Multiobjective optimization of building design using TRNSYS simulations, genetic algorithm, and Artificial Neural NetworkBuilding and Environment, 2010