Mohamad Khaled Bassma
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Mohamad Khaled Bassma has a total of 7 co-authors. Here are the top co-authors by number of shared publications:
- Ghayth Tintawi
IMAGINE Studios, Brazil
10 shared publications - Khuloud Ali
Faculty of Architecture and Urbanism, Federal University of Rio de Janeiro (UFRJ), Rio de Janeiro, Brazil, Brazil
5 shared publications Khuloud Ali
Federal University of Rio de Janeiro (UFRJ), Brazil
4 shared publications- Lucas Rosse Caldas
Universidade Federal do Rio de Janeiro
2 shared publications - Aftab Haider
Southwest University of Political Science and Law, China
1 shared publication Lucas Monteiro
1 shared publication
Latest Publications
- 14 August 2026
- Published by IGI Global Scientific Publishing
- p. 27-58
The Invisible Lines of Environmental Reporting
Environmental reporting is often treated as a problem of measurement accuracy. Credibility, in this view, depends on data quality and the reliability of calculation methods. This chapter adopts a different position. It argues that the main sources of variation arise earlier, during the construction of reporting boundaries. The analysis focuses on the built environment. Environmental performance is studied through decisions that define scope, establish baselines, introduce assumptions, and determine materiality. These elements operate before measurement is finalized. They determine what is included, how impacts are interpreted, and how results are presented. Building on this, the chapter develops a conceptual synthesis drawn from environmental accounting, sustainability reporting, and life cycle assessment. Through this synthesis, disclosure is reframed as an interpretive process rather than a neutral reflection of reality. While reporting outcomes may seem consistent, their underlying conditions may differ. Such differences limit comparability and obscure assumptions.
- 14 August 2026
- Published by IGI Global Scientific Publishing
- p. 27-58
The Invisible Lines of Environmental Reporting
Environmental reporting is often treated as a problem of measurement accuracy. Credibility, in this view, depends on data quality and the reliability of calculation methods. This chapter adopts a different position. It argues that the main sources of variation arise earlier, during the construction of reporting boundaries. The analysis focuses on the built environment. Environmental performance is studied through decisions that define scope, establish baselines, introduce assumptions, and determine materiality. These elements operate before measurement is finalized. They determine what is included, how impacts are interpreted, and how results are presented. Building on this, the chapter develops a conceptual synthesis drawn from environmental accounting, sustainability reporting, and life cycle assessment. Through this synthesis, disclosure is reframed as an interpretive process rather than a neutral reflection of reality. While reporting outcomes may seem consistent, their underlying conditions may differ. Such differences limit comparability and obscure assumptions.
- Open Access
- 29 June 2026
- Published by MDPI AG in Preprints.org
From Simulation to Design Rules: Explainable AI for Climate-Adaptive Residential Façades Across Global Climates
Climate-adaptive façade design is essential for reducing residential energy demand while maintaining thermal acceptability across diverse climate conditions. However, many optimization studies remain limited to single climates or present Pareto outputs without translating them into practical design rules. This study develops an explainable simulation-based framework for deriving robust façade design rules for energy-efficient, low-carbon-oriented residential buildings across eight global climate contexts. A standardized five-story residential apartment prototype with a gross floor area of 2240 m² was modeled in DesignBuilder using the EnergyPlus 9.4 simulation engine. The study covered Abu Dhabi, Athens, Berlin, Miami, Phoenix, Riyadh, Singapore, and Stockholm. Four façade variables were assessed: window-to-wall ratio, orientation, external shading depth, and glazing type. NSGA-II optimization was applied with a population size of 40 and 30 generations per city, producing approximately 1200 evaluations per climate context and about 9600 simulations in total. The optimization minimized energy use intensity and ASHRAE 55 discomfort hours. Random Forest models and SHAP analysis were then used to identify dominant performance drivers and support rule extraction. The optimized solutions reduced energy use intensity by 44.63%–60.19% and discomfort hours by 16.71%–49.71% relative to the baseline cases. Random Forest models achieved high predictive accuracy, with R² values of 0.9942 for energy performance and 0.9954 for comfort. Aggregated feature importance showed that climate context was the dominant determinant of performance, accounting for 45.1% of energy-model importance and 69.6% of comfort-model importance. Among façade variables, window-to-wall ratio was the strongest design driver, while orientation contributed only 0.5% in both models. The results show that robust façade design cannot rely on universal prescriptions. Hot-arid climates favored low glazing ratios, high-performance glazing, and external shading, while temperate and cold climates allowed larger glazing areas with efficient glazing and limited shading. The proposed framework converts simulation, optimization, and explainable machine-learning outputs into practical climate-adaptive façade rules for early-stage energy-efficient and low-carbon-oriented residential design.
- 29 June 2026
- Published by MDPI AG in Preprints.org
Open AccessFrom Simulation to Design Rules: Explainable AI for Climate-Adaptive Residential Façades Across Global Climates
Climate-adaptive façade design is essential for reducing residential energy demand while maintaining thermal acceptability across diverse climate conditions. However, many optimization studies remain limited to single climates or present Pareto outputs without translating them into practical design rules. This study develops an explainable simulation-based framework for deriving robust façade design rules for energy-efficient, low-carbon-oriented residential buildings across eight global climate contexts. A standardized five-story residential apartment prototype with a gross floor area of 2240 m² was modeled in DesignBuilder using the EnergyPlus 9.4 simulation engine. The study covered Abu Dhabi, Athens, Berlin, Miami, Phoenix, Riyadh, Singapore, and Stockholm. Four façade variables were assessed: window-to-wall ratio, orientation, external shading depth, and glazing type. NSGA-II optimization was applied with a population size of 40 and 30 generations per city, producing approximately 1200 evaluations per climate context and about 9600 simulations in total. The optimization minimized energy use intensity and ASHRAE 55 discomfort hours. Random Forest models and SHAP analysis were then used to identify dominant performance drivers and support rule extraction. The optimized solutions reduced energy use intensity by 44.63%–60.19% and discomfort hours by 16.71%–49.71% relative to the baseline cases. Random Forest models achieved high predictive accuracy, with R² values of 0.9942 for energy performance and 0.9954 for comfort. Aggregated feature importance showed that climate context was the dominant determinant of performance, accounting for 45.1% of energy-model importance and 69.6% of comfort-model importance. Among façade variables, window-to-wall ratio was the strongest design driver, while orientation contributed only 0.5% in both models. The results show that robust façade design cannot rely on universal prescriptions. Hot-arid climates favored low glazing ratios, high-performance glazing, and external shading, while temperate and cold climates allowed larger glazing areas with efficient glazing and limited shading. The proposed framework converts simulation, optimization, and explainable machine-learning outputs into practical climate-adaptive façade rules for early-stage energy-efficient and low-carbon-oriented residential design.
- Open Access
- 23 June 2026
- Published by MDPI AG in Preprints.org
Integrating Multi-Objective Optimization, Random Forest Learning, and SHAP-Based Explainability for Climate-Responsive Residential Envelope Design in Gulf Coastal Cities
This study presents an explainable artificial intelligence framework for climate-responsive residential envelope design in Gulf coastal cities by integrating building performance simulation, multi-objective optimization, machine learning, and explainability analysis. While previous studies have largely focused on minimizing energy consumption, limited research has simultaneously considered energy performance, capital cost, and thermal comfort within a unified and interpretable decision-support framework. The objective of this research was to identify dominant envelope design variables and derive practical design recommendations for residential buildings located in Dubai, Doha, and Manama. A two-story detached villa prototype was developed and simulated under representative coastal hot-arid climate conditions. Six envelope and operational design variables, including window-to-wall ratio (WWR), shading depth, cooling setpoint, glazing type, wall construction, and roof construction, were evaluated through a simulation-based optimization framework. A total of 600 design alternatives were generated using NSGA-II optimization and subsequently used to train Random Forest predictive models for energy use intensity (EUI), capital cost, and ASHRAE 55 thermal discomfort hours. SHAP (Shapley Additive Explanations) analysis was then applied to quantify variable importance and extract interpretable design rules. The results demonstrated strong predictive capability, with Random Forest models achieving R² values of 0.933 for EUI, 0.982 for capital cost, and 0.955 for thermal discomfort. SHAP analysis revealed that WWR was the dominant driver of energy performance, accounting for 65.2% of total feature importance, while wall construction exerted the greatest influence on capital cost. Thermal comfort was primarily governed by cooling setpoint, followed by WWR and shading depth. Dependence analysis further identified clear threshold relationships between envelope variables and performance outcomes. The proposed framework transforms optimization datasets into actionable design knowledge and provides interpretable decision support for architects, consultants, and developers seeking cost-effective and climate-responsive residential envelope solutions in Gulf coastal environments.
- 23 June 2026
- Published by MDPI AG in Preprints.org
Open AccessIntegrating Multi-Objective Optimization, Random Forest Learning, and SHAP-Based Explainability for Climate-Responsive Residential Envelope Design in Gulf Coastal Cities
This study presents an explainable artificial intelligence framework for climate-responsive residential envelope design in Gulf coastal cities by integrating building performance simulation, multi-objective optimization, machine learning, and explainability analysis. While previous studies have largely focused on minimizing energy consumption, limited research has simultaneously considered energy performance, capital cost, and thermal comfort within a unified and interpretable decision-support framework. The objective of this research was to identify dominant envelope design variables and derive practical design recommendations for residential buildings located in Dubai, Doha, and Manama. A two-story detached villa prototype was developed and simulated under representative coastal hot-arid climate conditions. Six envelope and operational design variables, including window-to-wall ratio (WWR), shading depth, cooling setpoint, glazing type, wall construction, and roof construction, were evaluated through a simulation-based optimization framework. A total of 600 design alternatives were generated using NSGA-II optimization and subsequently used to train Random Forest predictive models for energy use intensity (EUI), capital cost, and ASHRAE 55 thermal discomfort hours. SHAP (Shapley Additive Explanations) analysis was then applied to quantify variable importance and extract interpretable design rules. The results demonstrated strong predictive capability, with Random Forest models achieving R² values of 0.933 for EUI, 0.982 for capital cost, and 0.955 for thermal discomfort. SHAP analysis revealed that WWR was the dominant driver of energy performance, accounting for 65.2% of total feature importance, while wall construction exerted the greatest influence on capital cost. Thermal comfort was primarily governed by cooling setpoint, followed by WWR and shading depth. Dependence analysis further identified clear threshold relationships between envelope variables and performance outcomes. The proposed framework transforms optimization datasets into actionable design knowledge and provides interpretable decision support for architects, consultants, and developers seeking cost-effective and climate-responsive residential envelope solutions in Gulf coastal environments.
- Open Access
- 10 June 2026
- Published by MDPI AG in Preprints.org
Tri-Objective Pareto Optimization of Residential Building Envelopes for Energy, Thermal Comfort, and Embodied Carbon in Inland and Coastal Hot-Arid Climates
Buildings account for a substantial share of global energy consumption and greenhouse gas emissions, creating an urgent need for design strategies that simultaneously address operational performance, occupant comfort, and life-cycle environmental impacts. While simulation-based optimization has become increasingly common in building performance research, relatively few studies evaluate energy use, thermal comfort, and embodied carbon within a unified tri-objective framework. This study presents a simulation-based tri-objective Pareto optimization of residential buildings in Riyadh, Saudi Arabia, and Dubai, United Arab Emirates, using DesignBuilder, EnergyPlus, and the Non-Dominated Sorting Genetic Algorithm II (NSGA-II). A standardized four-story residential apartment prototype comprising 16 thermal zones and 2239.82 m² of conditioned floor area was developed and simulated under identical geometric, operational, and HVAC assumptions. Window-to-wall ratio, glazing type, external shading depth, and cooling setpoint temperature were optimized to minimize annual site energy consumption, ASHRAE 55 thermal discomfort hours, and embodied carbon emissions. Baseline simulations revealed substantially higher operational demand in Dubai, with annual energy consumption reaching 272,077 kWh compared with 196,478 kWh in Riyadh, while discomfort hours increased from 2,530 h/year to 3,262 h/year. Optimization reduced annual energy demand by 72.9% in Riyadh and 74.5% in Dubai, while thermal discomfort was reduced to 776 h/year in the best-performing comfort solution. Pareto-optimal solutions consistently favored low window-to-wall ratios (10–16%), high-performance glazing, and external overhangs between 1.5 and 2.0 m. The findings demonstrate the effectiveness of tri-objective optimization for balancing operational efficiency, occupant comfort, and embodied carbon while providing climate-responsive façade design guidance for residential buildings in hot-arid Gulf environments.
- 10 June 2026
- Published by MDPI AG in Preprints.org
Open AccessTri-Objective Pareto Optimization of Residential Building Envelopes for Energy, Thermal Comfort, and Embodied Carbon in Inland and Coastal Hot-Arid Climates
Buildings account for a substantial share of global energy consumption and greenhouse gas emissions, creating an urgent need for design strategies that simultaneously address operational performance, occupant comfort, and life-cycle environmental impacts. While simulation-based optimization has become increasingly common in building performance research, relatively few studies evaluate energy use, thermal comfort, and embodied carbon within a unified tri-objective framework. This study presents a simulation-based tri-objective Pareto optimization of residential buildings in Riyadh, Saudi Arabia, and Dubai, United Arab Emirates, using DesignBuilder, EnergyPlus, and the Non-Dominated Sorting Genetic Algorithm II (NSGA-II). A standardized four-story residential apartment prototype comprising 16 thermal zones and 2239.82 m² of conditioned floor area was developed and simulated under identical geometric, operational, and HVAC assumptions. Window-to-wall ratio, glazing type, external shading depth, and cooling setpoint temperature were optimized to minimize annual site energy consumption, ASHRAE 55 thermal discomfort hours, and embodied carbon emissions. Baseline simulations revealed substantially higher operational demand in Dubai, with annual energy consumption reaching 272,077 kWh compared with 196,478 kWh in Riyadh, while discomfort hours increased from 2,530 h/year to 3,262 h/year. Optimization reduced annual energy demand by 72.9% in Riyadh and 74.5% in Dubai, while thermal discomfort was reduced to 776 h/year in the best-performing comfort solution. Pareto-optimal solutions consistently favored low window-to-wall ratios (10–16%), high-performance glazing, and external overhangs between 1.5 and 2.0 m. The findings demonstrate the effectiveness of tri-objective optimization for balancing operational efficiency, occupant comfort, and embodied carbon while providing climate-responsive façade design guidance for residential buildings in hot-arid Gulf environments.
- Open Access
- 5 June 2026
- Published by MDPI AG in Preprints.org
Envelope Design Trade-Offs for Low-Carbon Residential Buildings in Dubai: A Simulation-Based Multi-Objective Optimization Study
Residential buildings in Dubai experience high cooling demand due to extreme climatic conditions, increasing both operational energy consumption and carbon-related environmental impacts. While previous studies have commonly focused on operational energy reduction, fewer investigations have simultaneously examined thermal comfort and embodied carbon implications within residential envelope optimization. This study investigates envelope design trade-offs for low-carbon residential buildings in Dubai through a simulation-based multi-objective optimization framework. A two-story residential villa prototype was developed in DesignBuilder and evaluated under Dubai climatic conditions using an EnergyPlus engine and hourly weather data. Five envelope-related variables were optimized, including window-to-wall ratio, glazing type, external shading depth, wall construction, and roof construction, while occupancy, HVAC performance, ventilation, and operational schedules remained fixed. Optimization was conducted to identify balanced envelope solutions based primarily on annual site energy consumption and thermal discomfort, while embodied carbon was retained as a supporting material-impact indicator. The baseline model recorded an annual site energy use of 40,427.48 kWh/year, corresponding to 189.44 kWh/m²·year, with 3,036.50 annual discomfort hours. Optimized solutions achieved reductions in annual site energy use to approximately 18,107 kWh/year, representing an improvement of nearly 55% relative to the baseline case. Results consistently favored moderate window-to-wall ratios, low-emissivity glazing, insulated roof assemblies, and external shading strategies. The findings provide practical guidance for climate-responsive residential envelope design in Dubai and contribute evidence for balancing operational and embodied environmental performance in cooling-dominated climates.
- 5 June 2026
- Published by MDPI AG in Preprints.org
Open AccessEnvelope Design Trade-Offs for Low-Carbon Residential Buildings in Dubai: A Simulation-Based Multi-Objective Optimization Study
Residential buildings in Dubai experience high cooling demand due to extreme climatic conditions, increasing both operational energy consumption and carbon-related environmental impacts. While previous studies have commonly focused on operational energy reduction, fewer investigations have simultaneously examined thermal comfort and embodied carbon implications within residential envelope optimization. This study investigates envelope design trade-offs for low-carbon residential buildings in Dubai through a simulation-based multi-objective optimization framework. A two-story residential villa prototype was developed in DesignBuilder and evaluated under Dubai climatic conditions using an EnergyPlus engine and hourly weather data. Five envelope-related variables were optimized, including window-to-wall ratio, glazing type, external shading depth, wall construction, and roof construction, while occupancy, HVAC performance, ventilation, and operational schedules remained fixed. Optimization was conducted to identify balanced envelope solutions based primarily on annual site energy consumption and thermal discomfort, while embodied carbon was retained as a supporting material-impact indicator. The baseline model recorded an annual site energy use of 40,427.48 kWh/year, corresponding to 189.44 kWh/m²·year, with 3,036.50 annual discomfort hours. Optimized solutions achieved reductions in annual site energy use to approximately 18,107 kWh/year, representing an improvement of nearly 55% relative to the baseline case. Results consistently favored moderate window-to-wall ratios, low-emissivity glazing, insulated roof assemblies, and external shading strategies. The findings provide practical guidance for climate-responsive residential envelope design in Dubai and contribute evidence for balancing operational and embodied environmental performance in cooling-dominated climates.
- Open Access
- 25 May 2026
- Published by MDPI AG in Preprints.org
Material Sufficiency, Energy Use, and Life-Cycle Carbon in Hot-Arid Residential Buildings: A Pareto-Informed Multi-Criteria Evaluation of Envelope Design Strategies
Hot-arid residential buildings experience persistent cooling demand and increasing material intensity, yet most building-performance studies prioritize operational energy while insufficiently integrating life-cycle carbon and material sufficiency into envelope evaluation. This limits the ability to distinguish between performance gains achieved through passive design efficiency and those dependent on increased material input. This study investigates the interaction between material sufficiency, energy use, and life-cycle carbon in residential buildings across three representative hot-arid climates: Riyadh, Abu Dhabi, and Doha. A Pareto-informed multi-criteria evaluation framework was applied using a standardized mid-rise residential prototype to assess predefined envelope design strategies under consistent operational conditions. Dynamic energy simulations were conducted in DesignBuilder/EnergyPlus, while embodied carbon was quantified through a consistent material inventory approach. Baseline energy use intensity (EUI) values reached 64.98, 83.13, and 93.67 kWh/m²·year for Riyadh, Abu Dhabi, and Doha, respectively, reflecting increasing cooling demand from inland dry to humid coastal conditions. Envelope optimization reduced EUI to 47.33–72.40 kWh/m²·year, while embodied carbon ranged from 40,761.2 to 57,146.2 kgCO₂-eq per configuration. Reduced window-to-wall ratio strategies consistently achieved the most balanced performance across all climates, whereas high-glazing configurations increased energy demand, carbon emissions, and material intensity. The study operationalizes a sufficiency-oriented evaluation perspective that supports climate-responsive envelope decision-making by integrating operational and material performance within a unified comparative framework.
- 25 May 2026
- Published by MDPI AG in Preprints.org
Open AccessMaterial Sufficiency, Energy Use, and Life-Cycle Carbon in Hot-Arid Residential Buildings: A Pareto-Informed Multi-Criteria Evaluation of Envelope Design Strategies
Hot-arid residential buildings experience persistent cooling demand and increasing material intensity, yet most building-performance studies prioritize operational energy while insufficiently integrating life-cycle carbon and material sufficiency into envelope evaluation. This limits the ability to distinguish between performance gains achieved through passive design efficiency and those dependent on increased material input. This study investigates the interaction between material sufficiency, energy use, and life-cycle carbon in residential buildings across three representative hot-arid climates: Riyadh, Abu Dhabi, and Doha. A Pareto-informed multi-criteria evaluation framework was applied using a standardized mid-rise residential prototype to assess predefined envelope design strategies under consistent operational conditions. Dynamic energy simulations were conducted in DesignBuilder/EnergyPlus, while embodied carbon was quantified through a consistent material inventory approach. Baseline energy use intensity (EUI) values reached 64.98, 83.13, and 93.67 kWh/m²·year for Riyadh, Abu Dhabi, and Doha, respectively, reflecting increasing cooling demand from inland dry to humid coastal conditions. Envelope optimization reduced EUI to 47.33–72.40 kWh/m²·year, while embodied carbon ranged from 40,761.2 to 57,146.2 kgCO₂-eq per configuration. Reduced window-to-wall ratio strategies consistently achieved the most balanced performance across all climates, whereas high-glazing configurations increased energy demand, carbon emissions, and material intensity. The study operationalizes a sufficiency-oriented evaluation perspective that supports climate-responsive envelope decision-making by integrating operational and material performance within a unified comparative framework.
- Open Access
- 10 March 2026
- Published by MDPI AG in Preprints.org
Algorithmic Sustainability: Governance Conditions for AI-Driven Environmental Decision-Making
Environmental governance is no longer shaped only by expert judgement or statutory procedure. In recent years, algorithmic systems have begun to mediate how data are interpreted, to shape the scoring of risk, and to influence the way policy priorities are established. These systems now affect regulatory analysis. They also inform climate adaptation modelling and guide decisions on land use while supporting sustainability monitoring. Although artificial intelligence (AI) is often presented as a means to improve environmental outcomes, its deployment introduces lifecycle emissions while raising concerns about institutional opacity and exposing risks related to public legitimacy that remain insufficiently embedded in current governance frameworks. This article advances the concept of algorithmic sustainability and treats it as a condition of governance rather than a technical attribute of computational tools. Drawing on a structured qualitative synthesis of interdisciplinary research, the study identifies three conditions required for sustainable AI use in environmental decision systems. One concerns lifecycle carbon integrity. Another addresses institutional accountability. A third focuses on alignment with public value. These conditions are translated into a tiered Environmental AI Impact Assessment model (EAIA) designed to support regulatory oversight while remaining institutionally feasible. By separating computing-related effects from operational consequences and from wider systemic implications, the framework clarifies how algorithmic applications may improve environmental performance while still generating rebound pressures that threaten broader sustainability goals.
- 10 March 2026
- Published by MDPI AG in Preprints.org
Open AccessAlgorithmic Sustainability: Governance Conditions for AI-Driven Environmental Decision-Making
Environmental governance is no longer shaped only by expert judgement or statutory procedure. In recent years, algorithmic systems have begun to mediate how data are interpreted, to shape the scoring of risk, and to influence the way policy priorities are established. These systems now affect regulatory analysis. They also inform climate adaptation modelling and guide decisions on land use while supporting sustainability monitoring. Although artificial intelligence (AI) is often presented as a means to improve environmental outcomes, its deployment introduces lifecycle emissions while raising concerns about institutional opacity and exposing risks related to public legitimacy that remain insufficiently embedded in current governance frameworks. This article advances the concept of algorithmic sustainability and treats it as a condition of governance rather than a technical attribute of computational tools. Drawing on a structured qualitative synthesis of interdisciplinary research, the study identifies three conditions required for sustainable AI use in environmental decision systems. One concerns lifecycle carbon integrity. Another addresses institutional accountability. A third focuses on alignment with public value. These conditions are translated into a tiered Environmental AI Impact Assessment model (EAIA) designed to support regulatory oversight while remaining institutionally feasible. By separating computing-related effects from operational consequences and from wider systemic implications, the framework clarifies how algorithmic applications may improve environmental performance while still generating rebound pressures that threaten broader sustainability goals.
- Top Cited PapersOpen Access
AI-Guided Evolutionary Optimization of Passive Solar Design for Residential Heating Across Distinct Climate Zones
Achieving meaningful reductions in residential heating demand requires design strategies that can respond to climate-specific solar availability and envelope performance. Although passive solar principles are well established, their effectiveness remains highly context-dependent, and simplified prescriptive approaches may not capture interactions across different climates. This study presents an AI-guided evolutionary optimization framework for passive solar residential design, focusing exclusively on the reduction in annual space heating demand under standardized assumptions. A standardized single-story residential prototype is simulated across three climatic contexts: hot–dry (Riyadh), temperate (Barcelona), and cold (Toronto). Dynamic building performance simulations are conducted using EnergyPlus, coupled with DesignBuilder’s built-in Non-Dominated Sorting Genetic Algorithm II (NSGA-II) evolutionary optimization engine. Envelope-related variables, including the window-to-wall ratio, orientation, glazing configuration, and thermal mass, are optimized with a single objective: minimizing the annual heating load under idealized heating conditions. The results demonstrate substantial climate-dependent reductions in heating demand. In Toronto, the annual heating demand is reduced from approximately 16,900 kWh to 9600 kWh (≈43%). In Barcelona, a reduction from approximately 5650 kWh to 1990 kWh (≈65%) is achieved, while in Riyadh, heating demand is reduced from approximately 990 kWh to 39 kWh (>95%). The optimized solutions reveal distinct climate-specific design logic rather than universal passive rules. The results demonstrate that evolutionary optimization can support early-stage envelope design by revealing climate-specific heating strategies under clearly defined and comparable assumptions.
Top Cited PapersOpen AccessAI-Guided Evolutionary Optimization of Passive Solar Design for Residential Heating Across Distinct Climate Zones
Achieving meaningful reductions in residential heating demand requires design strategies that can respond to climate-specific solar availability and envelope performance. Although passive solar principles are well established, their effectiveness remains highly context-dependent, and simplified prescriptive approaches may not capture interactions across different climates. This study presents an AI-guided evolutionary optimization framework for passive solar residential design, focusing exclusively on the reduction in annual space heating demand under standardized assumptions. A standardized single-story residential prototype is simulated across three climatic contexts: hot–dry (Riyadh), temperate (Barcelona), and cold (Toronto). Dynamic building performance simulations are conducted using EnergyPlus, coupled with DesignBuilder’s built-in Non-Dominated Sorting Genetic Algorithm II (NSGA-II) evolutionary optimization engine. Envelope-related variables, including the window-to-wall ratio, orientation, glazing configuration, and thermal mass, are optimized with a single objective: minimizing the annual heating load under idealized heating conditions. The results demonstrate substantial climate-dependent reductions in heating demand. In Toronto, the annual heating demand is reduced from approximately 16,900 kWh to 9600 kWh (≈43%). In Barcelona, a reduction from approximately 5650 kWh to 1990 kWh (≈65%) is achieved, while in Riyadh, heating demand is reduced from approximately 990 kWh to 39 kWh (>95%). The optimized solutions reveal distinct climate-specific design logic rather than universal passive rules. The results demonstrate that evolutionary optimization can support early-stage envelope design by revealing climate-specific heating strategies under clearly defined and comparable assumptions.
- Open Access
- 25 February 2026
- Published by MDPI AG in Preprints.org
AI-Guided Evolutionary Optimization of Passive Solar Design for Residential Heating Across Distinct Climate Zones
Achieving meaningful reductions in residential heating demand requires design strategies that can respond to climate-specific solar availability and envelope performance. Although passive solar principles are well established, their effectiveness remains highly context-dependent, and simplified prescriptive approaches may not capture interactions across different climates. This study presents an AI-guided evolutionary optimization framework for passive solar residential design, focusing exclusively on the reduction in annual space heating demand under standardized assumptions. A standardized single-story residential prototype is simulated across three climatic contexts: hot–dry (Riyadh), temperate (Barcelona), and cold (Toronto). Dynamic building performance simulations are conducted using EnergyPlus, coupled with DesignBuilder’s built-in NSGA-II evolutionary optimization engine. Envelope-related variables, including the window-to-wall ratio, orientation, glazing configuration, and thermal mass, are optimized using a single objective: minimizing the annual heating load under idealized heating conditions. The results demonstrate substantial climate-dependent reductions in heating demand. In Toronto, the annual heating demand is reduced from approximately 16,900 kWh to 9600 kWh (≈43%). In Barcelona, a reduction from approximately 5650 kWh to 1990 kWh (≈65%) is achieved, while in Riyadh, heating demand is reduced from approximately 990 kWh to 39 kWh (>95%). The optimized solutions reveal distinct climate-specific design logic rather than universal passive rules. The results demonstrate that evolutionary optimization can support early-stage envelope design by revealing climate-specific heating strategies under clearly defined and comparable assumptions.
- 25 February 2026
- Published by MDPI AG in Preprints.org
Open AccessAI-Guided Evolutionary Optimization of Passive Solar Design for Residential Heating Across Distinct Climate Zones
Achieving meaningful reductions in residential heating demand requires design strategies that can respond to climate-specific solar availability and envelope performance. Although passive solar principles are well established, their effectiveness remains highly context-dependent, and simplified prescriptive approaches may not capture interactions across different climates. This study presents an AI-guided evolutionary optimization framework for passive solar residential design, focusing exclusively on the reduction in annual space heating demand under standardized assumptions. A standardized single-story residential prototype is simulated across three climatic contexts: hot–dry (Riyadh), temperate (Barcelona), and cold (Toronto). Dynamic building performance simulations are conducted using EnergyPlus, coupled with DesignBuilder’s built-in NSGA-II evolutionary optimization engine. Envelope-related variables, including the window-to-wall ratio, orientation, glazing configuration, and thermal mass, are optimized using a single objective: minimizing the annual heating load under idealized heating conditions. The results demonstrate substantial climate-dependent reductions in heating demand. In Toronto, the annual heating demand is reduced from approximately 16,900 kWh to 9600 kWh (≈43%). In Barcelona, a reduction from approximately 5650 kWh to 1990 kWh (≈65%) is achieved, while in Riyadh, heating demand is reduced from approximately 990 kWh to 39 kWh (>95%). The optimized solutions reveal distinct climate-specific design logic rather than universal passive rules. The results demonstrate that evolutionary optimization can support early-stage envelope design by revealing climate-specific heating strategies under clearly defined and comparable assumptions.