Effect of silicon and carbon content on shape memory in a single crystals of Fe–Mn–Cr–Ni–Si-based shape memory alloys
- 27 April 2026
- journal article
- Published by AIP Publishing in Applied Physics Letters
- Vol. 128 (17)
Abstract
The effect of the Si concentration (2.8 and 3.89 wt. %) and carbon alloying 0.18 wt. % on the reversible FCC ↔ HCP martensitic transformation (MT) in a free state and under stress, as well as on the magnitude of the shape memory effect (SME), was studied in [1¯44]-oriented single crystals of Fe–Mn–Cr–Ni–Si-based shape memory alloys. Upon cooling and subsequent heating in a free state, a reversible FCC ↔ HCP MT occurred with a wide thermal hysteresis ΔTh = Af–Ms = 170–195 K, and the alloys exhibited an SME. For the first time, an SME of 17.5% was obtained at 77 K under tension in a carbon-doped alloy, equal in magnitude to the theoretical lattice deformation ε0=17.5% for the FCC–HCP MT. An SME with an ε0 = 17.5% was ensured by strengthening the FCC phase and developing one predominant variant of HCP martensite under stress, while suppressing the formation of irreversible BCT martensite inside the plates of reversible HCP martensite from the onset of transformation and with an increasing strain of up to 20%.Keywords
Funding Information
- Russian Science Foundation (25-19-00023)
This publication has 23 references indexed in Scilit:
- Manufacturing, processing, applications, and advancements of Fe-based shape memory alloysJournal of Alloys and Compounds, 2024
- Key Factors Achieving Large Recovery Strains in Polycrystalline Fe–Mn–Si‐Based Shape Memory Alloys: A ReviewAdvanced Engineering Materials, 2017
- Factors influencing the stress-induced fcc↔hcp martensitic transformation in Co–32Ni single crystalActa Materialia, 2006
- The effect of nitrogen on shape memory effect in Fe-Mn-Si alloysScripta Materialia, 1996
- Development of Fe-based shape memory alloys associated with face-centered cubic-hexagonal close-packed martensitic transformations: Part II. transformation behaviorMetallurgical Transactions A, 1992
- Development of Fe-based shape memory alloys associated with face-centered cubic-hexagonal close-packed martensitic transformations: Part III. microstructuresMetallurgical Transactions A, 1992
- Strain Hardening of Hadfield Manganese SteelMetallurgical Transactions A, 1986
- Physical properties controlling shape memory effect in FeMnSi alloysActa Metallurgica, 1986
- Orientation and composition dependencies of shape memory effect IN Fe-Mn-Si alloysActa Metallurgica, 1984
- Shape memory effect in γ⇄ϵ transformation in Fe-30Mn-1Si alloy single crystalsActa Metallurgica, 1982