A 220-GHz Planar Triangular Lattice Transmitter Array With 42.7-dBm Peak EIRP for Long-Distance High-Data-Rate Wireless Communication
- 3 December 2024
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Microwave Theory and Techniques
- Vol. 73 (6) , 3194-3208
Abstract
In this article, we develop a 220-GHz planar triangular lattice transmitter (TX) array for achieving a super high effective isotropic radiated power (EIRP), addressing the challenges associated with long-distance and high-data-rate wireless communication in the terahertz (THz) band. Due to the confliction between the electrical large size THz chips and limited space among them, only a few THz arrays operating above 200 GHz have been reported, with most of them adopting a 1-D array configuration to satisfy the $\lambda$ /2 spacing requirement. This makes it challenging to achieve a high-quality radiation beam, high EIRP, and a 2-D scalable planar array. To overcome those challenges, a 2-D triangular lattice array is proposed and derived using the array factor (AF) formula, and subsequently utilized in the design of a 4 $\times$ 4 TX array integrated with a multilayer waveguide package. Consequently, distinct advantages are obtained, including enhanced EIRP and scalability. As a proof-of-concept, a 220-GHz 4 $\times$ 4 TX array was developed and fabricated by employing hybrid technologies, including a 130 nm silicon-germanium bipolar junction transistor and the complementary metal-oxide-semiconductor transistor (SiGe BiCMOS) process, a full-metal micromachining process, and a multilayer printed circuit board (PCB) technology. Experimental results demonstrate that the developed TX array achieves a peak EIRP of 42.7 dBm with a 3-dB radio frequency (RF) and width of 40 GHz, supporting a real-time wireless communication data rate of 18 Gbps with 16-quadrature amplitude modulation (QAM) at 100 m. The proposed TX array demonstrates several advantages, including a super high EIRP, extended communication range, high data rate, low cost, high integration, and compact size, making it well-suited for the THz wireless communication systems.Keywords
Funding Information
- National Natural Science Foundation of China (62131008)
- Fundamental Research Funds for the Central Universities (2242022k60003)
This publication has 46 references indexed in Scilit:
- Hardware Aspects of Sub-THz Antennas and Reconfigurable Intelligent Surfaces for 6G CommunicationsIEEE Journal on Selected Areas in Communications, 2023
- A 220 GHz Orthogonal Modulator Based on Subharmonic Mixers Using Anti‐Paralleled Schottky DiodesChinese Journal of Electronics, 2022
- Integrated Scheduling of Sensing, Communication, and Control for mmWave/THz Communications in Cellular Connected UAV NetworksIEEE Journal on Selected Areas in Communications, 2022
- Can Terahertz Provide High-Rate Reliable Low-Latency Communications for Wireless VR?IEEE Internet of Things Journal, 2022
- Channel Measurements and Modeling for Low-Terahertz Band Vehicular CommunicationsIEEE Journal on Selected Areas in Communications, 2021
- Survey on Terahertz Nanocommunication and Networking: A Top-Down PerspectiveIEEE Journal on Selected Areas in Communications, 2021
- 22.2 A 300GHz-Band Phased-Array Transceiver Using Bi-Directional Outphasing and Hartley Architecture in 65nm CMOS2021
- Low Grating Lobe Array Antenna With Electrically Large Property Based on TM50 ModeIEEE Access, 2019
- A 240 GHz Fully Integrated Wideband QPSK Transmitter in 65 nm CMOSIEEE Journal of Solid-State Circuits, 2015
- A 77-GHz Phased-Array Transceiver With On-Chip Antennas in Silicon: Receiver and AntennasIEEE Journal of Solid-State Circuits, 2006